EDGE TOOLS FOR SALE This is an index of edge tools for sale. Some of them will have a button to click to see a Picture. ... Instead of having to load each image to continue, just scroll this list and click to see an image. This list has axes and hatchets, drawknives, chisels, adzes, slicks and carving tools.
Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

Cantelo Draw Knife

I have a New Edge Tool Showcase that has thumbnail pictures and descriptions of some interesting edge tools. I also have information of some that have been sold. I am breaking up the Showcase into separate categories to make it easier to use.
Click here to go to the Edge Tool Showcase


Back To Tool Index Back to Homepage

Blade Sharpening [Click To Order]


  1. STANLEY NO. 200 SHARPENING JIG. For chisels and plane irons. It adjusts to the bevel degree you want. 97% nickel plating, G++ ........... Sold $90.00
    Picture

  2. STEARNS NO. 1 CHISEL AND TOOL GRINDER. For chisels and plane irons. It adjusts to the bevel degree you want. The catalog illustration shows it in use on a bigger, slow grinding wheel. It also works on a flat stone. Most of the nickel plating remains, but it is dull, G+ ........... Sold $35.00
    Picture

  3. MILLERS FALLS NO. 240 CHISEL AND TOOL GRINDER. For chisels and plane irons. It adjusts to the bevel degree that you want, G+ ........... Sold $30.00
    Picture

Axes and Hatchets [Click To Order]

  1. STANLEY HATCHET 1 1/4 lb. 2 3/4 inch blade, 13 1/2 inches overall, G+ ........... $25.00
    Picture

  2. TRUE TEMPER BROAD HATCHET, 4 1/2 inch blade. Bevel on one side for paring work. Original handle. Needs some sharpening, G+ ........... Sold $40.00
    Picture

Drawknives [Click To Order]

  1. CHAMFER GUIDES, Not marked by Mfr.but has a July.19.(18)79 patent date on a screw. They fit on a draw knife to cut chamfers. They are built to cut on a skew, G++ ................ Sold $55.00
    Picture

  2. A. J. WILKINSON, BOSTON, 6 INCH DRAW KNIFE, with FOLDING MAPLE? HANDLES, Patented July, 16, 1895 stamped on the end of the blade. Needs a bit of sharpening and lapping, G+ ................... $110.00
    Picture

  3. 7 INCH DRAW KNIFE, Looks manufactured, but not marked. A very nice little user. Needs a bit of sharpening, G+ .................... $25.00
    Picture

  4. A. J. WILKINSON, BOSTON, 7 INCH DRAW KNIFE, with FOLDING HANDLES, The handles look like they are fruitwood. Patented July, 16, 1895 stamped on the end of the blade. Needs a bit of sharpening and lapping, Fine ................... $105.00
    Picture

  5. HARTFORD 7 INCH DRAW KNIFE. Laminated blade. Could use a bit of sharpening and lapping, Fine .................... $45.00
    Picture

  6. A. J. WILKINSON, BOSTON, 8 INCH DRAW KNIFE, with FOLDING HANDLES, Laminated blade. Patented July, 16, 1895 stamped on the end of the blade. Owner's initials. Needs a bit of sharpening and lapping, G++ ................... $85.00
    Picture

  7. PEXTO, 8 INCH DRAW KNIFE. Nice Maple? handles. Looks like a laminated blade. Could use a bit of sharpening and lapping, G .......... $35.00
    Picture

  8. PEXTO, 8 INCH DRAW KNIFE, with FOLDING HANDLES. Shiny-nice, Fine ................. $75.00
    Picture

  9. C. E. JENNINGS, 10 INCH DRAW KNIFE, with folding handles. Arrowhead logo. Patented February 20, 1906 stamped on the hollow-ground blade. Looks like a laminated blade. An uncommon draw knife from a great maker. Needs a bit of sharpening and lapping, G++ ......... $95.00
    Picture

  10. NORTHERN KING, MARSHALL WELLS, 10 INCH DRAW KNIFE, Can use a bit of sharpening and lapping, G+ ................. $40.00
    Picture

  11. UNMARKED by Mfr., 10 INCH SHINGLE DRAW KNIFE, Hollow-ground blade. The blade has a 1/8 inch curve (belly)form handle to handle, for fine shaving work, like shingles. Some light stain and rust on the blade. Stained hardwood handles. Can use a bit of sharpening and lapping, G++ ................. $45.00
    Picture

  12. 10 INCH DRAW KNIFE, There is part of a mfr. mark that I can't parse. Laminated blade. There is a nick in the blade, about 1/16th inch deep, which will need some attention, G+ ........... $25.00
    Picture

Chisels, Gouges and Slicks [Click To Order]

Stanley Chisels
  1. STANLEY NO. 750 BEVEL-EDGE FIRMER CHISEL SET OF SEVEN, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, and 1 1/2 inch. Full-length between 9 1/2 and 10 1/4 inches. Marked Stanley, and Made in USA on the sockets. These are in crisp condition. The handles are nice. The chisels have had little use but need a bit of sharpening and lapping. Some minor patina. A very nice set, G+++ ....... Sold $375.00
    Picture

  2. STANLEY NO. 60 CHISEL SET, Thin Blade. Set of six earlier butt chisels with the Stanloid handles. They have the metal caps on the handles. These are high-quality chisels. When these came out, they were more expensive than the Everlasting chisels. 1/4, 3/8 1/2, 3/4, 1 and 1 1/2 inch. These were sold around 1960. Very good user tools. Close to brand-new, Fine ++ ....... $180.00
    Picture

  3. STANLEY NO. R40 BEVEL-EDGE POCKET CHISEL, 1/2 inch. An early one from the 1930's. Black composition everlasting handles with the metal caps on the top, and orange Stanley logo. A high-quality chisel in nice original condition with some minor wear and patina. 4 1/2 inch blade, overall length is 9 inches. Could use a bit of sharpening, G++ ....... $60.00
    Picture

  4. STANLEY NO. R40 BEVEL-EDGE POCKET CHISEL, 3/4 inch. An early one from the 1930's. Black composition everlasting handles with the metal caps on the top, and orange Stanley logo. A high-quality chisel in nice original condition with some minor wear and patina. 4 1/4 inch blade, overall length is 8 3/4 inches. Could use a bit of sharpening, G++ ....... $60.00
    Picture

  5. STANLEY EVERLASTING NO. 50, 1 inch Bevel Edge Butt Chisel. Stanley on the blade and Made in USA and a patent number stamped on the socket. The chisel is 8 inches overall. Has light pitting and needs some sharpening and a lapping, G ....... $30.00
    Picture

  6. Boxed STANLEY NO. 60 5/8 INCH CHISEL, Thin Blade. An early one that is marked Stanley, No. 60 and Made in USA on the socket, not the handle. Stanloid handles. They have the metal caps on the handles to absorb hammering. These are high-quality chisels. When these came out, they were more expensive than the Everlasting chisels. The box is very nice. Looks about new, Fine++ .......... $50.00
    Picture

  7. Boxed STANLEY NO. 60 2 INCH CHISEL, Thin Blade. An early one that is marked Stanley, No. 60 and Made in USA on the socket, not the handle. Stanloid handles. They have the metal caps on the handles to absorb hammering. These are high-quality chisels. When these came out, they were more expensive than the Everlasting chisels. The box is nice. Looks about new, Fine++ .......... $70.00
    Picture

  8. STANLEY NO. 161, 1 1/2 inch bevel edge butt chisel. A tanged chisel with a handle with a brass ferrule. This is the first one of these I have had. Marked Stanley on the shank, and with the number on the ferrule. Partial decal on the handle, G++ ....... $55.00
    Picture

  9. STANLEY NO. 720, 1/4 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 12 inches overall. Nice steel, some wear to the finish on the handle. Could use some sharpening. Very crisp and nice, G++ ....... $50.00
    Picture

  10. STANLEY NO. 720, 3/4 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 12 inches overall. Nice handle. Needs a bit of sharpening and lapping, Fine ....... $65.00
    Picture

  11. STANLEY NO. 720, 3/4 inch bevel edge cabinet chisel. Stanley on the blade, and Made in USA mark on the socket. 4 1/4 inch blade 11 1/4 inches overall. Some stain on the blade and scuffing on the finish on the handle. Can use some sharpening, G+ ....... $40.00
    Picture

  12. STANLEY NO. 720, 7/8 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/2 inch blade, 12 5/8 inches overall. Almost brand-new, Fine+ ....... $105.00
    Picture

  13. STANLEY NO. 720, 1 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 4 1/4 inch blade, 11 1/4 inches overall. The leather on the handle is worn and there are a few dings to the finish. Needs some sharpening, G+ ....... $50.00
    Picture

  14. STANLEY NO. 720, 1 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 3/4 inch blade, 13 inches overall. Crisp but the blade has some patina. Needs some sharpening, G+ ....... $50.00
    Picture

  15. STANLEY NO. 750, 1/4 inch bevel edge butt chisel. 3 5/8 blade, 8 7/8 inches overall. Marked Stanley No. 750 and Made in USA on the socket. Crisp with some light patina. Could use some some sharpening, G++ ....... $55.00
    Picture

  16. STANLEY NO. 750, 3/8 inch bevel edge butt chisel. 3 1/2 blade, 9 inches overall. Marked Stanley No. 750 and Made in USA on the socket. Crisp with some light patina. Some minor bubbling of the finish on the handle. Could use some some sharpening, G++ ....... $55.00
    Picture

  17. Boxed STANLEY NO. 750, 1/2 inch bevel edge butt chisel. 9 1/4 inches overall length. Marked Stanley, No. 750, and Made in USA on the socket. The chisel has had slight use. The box is pretty nice with some stain on the top, Fine ....... $80.00
    Picture

  18. STANLEY NO. 750, 1/2 inch bevel edge butt chisel. 2 3/4 blade, 8 1/2 inches overall. Marked Stanley No. 750 and Made in USA on the socket. Crisp with some light patina. Could use some some sharpening, G++ ....... $50.00
    Picture

  19. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. 3 1/8 inch blade, 9 inches overall. Marked Stanley, No. 750, and Made in USA on the socket. Decal on the handle. Very nice. Could use some some sharpening, Fine ....... $50.00
    Picture

  20. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. Marked Stanley, D and Made in USA on the socket. 3 1/4 inch blade, 9 inches overall. Some patina on the blade. Could use some some sharpening, G+ ....... $30.00
    Picture

  21. STANLEY NO. 750, 1 inch bevel edge butt chisel. 3 blade, 9 1/4 inches overall. Marked Stanley No. 750 and Made in USA on the socket. Crisp with some light patina. Could use some some sharpening, G++ ....... $55.00
    Picture

Other Chisels [Click To Order]
  1. Boxed SET OF 12 C. E. JENNINGS NO. 71 BEVEL-EDGE SOCKET FIRMER CHISELS, Arrowhead trademark. 1/8, 1/4, 3/8, 1/2, 5/8 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 3/4 and 2 inch widths.
    Most of them are shiny with some minor stain from age.
    The handles on the 1 1/2 and 1 3/4 have been replaced with other vintage handles. The side of the socket on the 1 1/4 is split open at the top inch. The 1 1/2 is a little shorter and has been lightly cleaned.
    A nice heavy-duty set (the two-inch is 14 3/8 inches long), in the original finger-jointed box. With the stated flaws, it's still G++ ....... $450.00
    Picture
    Picture

  2. SET OF 5 SWEDISH TANGED BUTT CHISELS, Made by Torshalla Smide. The sizes are roughly 1/8, 1/4, 3/8, 3/4 and 1 inch, G++ ....... $90.00
    Picture

  3. OHIO TOOL CO., 3/4 CORNER CHISEL. 8 inch blade, 16 1/2 inches overall. Can use some sharpening, G+ ....... $60.00
    Picture

  4. THE JAMES SWAN CO., 1/8 INCH SOCKET FIRMER CHISEL. 6 3/8 inch blade, 12 7/8 inches overall. Has some minor stain and a few spots of pitting on the side shown, G++ ....... $45.00
    Picture

  5. L. A. BERG, ESKILTUNA, SWEDEN, 1/8 INCH BEVEL-EDGE SOCKET BUTT CHISEL. Blade is 2 3/4 inches, overall length is 8 3/8 inches. Close to shiny-new, with some wear to the deacl on the handle, Fine ....... Sold $35.00
    Picture

  6. UNMARKED, 1/8 INCH SOCKET CABINET CHISEL. 4 1/4 inch blade length, overall length is 11 inches, G+ ....... $30.00
    Picture

  7. BUCK BROS., 1/4 INCH CRANK-NECK CHISEL. Bevel edge. Blade is 6 inches. Can use some sharpening and lapping, G+ ....... $55.00
    Picture

  8. BUCK BROTHERS, 1/4 INCH SOCKET FIRMER CHISEL. Bevel edge. Blade is 5 1/2 inches, 12 inches overall. Can use some sharpening and lapping, G+ ....... $40.00
    Picture

  9. KEEN KUTTER, 1/4 INCH SOCKET BUTT CHISEL. Blade is 3 1/2 inches, overall length is 9 1/2 inches. The handle looks like a replacement. Can use some sharpening, G+ .......$20.00
    Picture

  10. ZENITH, 1/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 12 1/2 inches. Can use some sharpening, G++ ....... $40.00
    Picture

  11. SHAPLEIGH HARDWARE, DIAMOND EDGE, 3/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL, G+ ....... $30.00
    Picture

  12. ZENITH, 3/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches . The leather is chewed. Can use some sharpening, G+ ....... $22.00
    Picture

  13. UNION HARDWARE, 1/2 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. The blade is 8 inches, 14 3/4 inches overall length. Can use some sharpening, G+ ....... $45.00
    Picture

  14. GREENLEE, 1/2 INCH SOCKET FIRMER CHISEL. Blade is 4 1/2 inches, overall length is 11 1/2 inches . Can use some sharpening, G+ ....... Sold $25.00
    Picture

  15. DOUGLASS MFG. CO., 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 5 1/2 inches, overall length is 13 1/2 inches. It could use a bit of sharpening and lapping, G+ ....... $25.00
    Picture

  16. FULTON TOOL CO., 1/2 INCH SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/4 inches. Can use some sharpening, G+ ....... $25.00
    Picture

  17. SAMSON, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches . Can use some sharpening, G+ ....... $25.00
    Picture

  18. EVERKEEN, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches. Ebonized handle. Can use some sharpening and lapping, G+ ....... $30.00
    Picture

  19. T.H. WHITHERBY, 5/8 INCH SOCKET FIRMER CHISEL. 5 1/2 inch blade, 12 1/4 inches overall length. Most of the label remains on the handle. Very minor roughness. Can use some sharpening, G+ ....... $45.00
    Picture

  20. D. R. BARTON, 5/8 INCH BEVEL-EDGE FIRMER CHISEL. Blade length is 5 1/2 inches. There is some pitting, but not near the end. Needs some sharpening and lapping, G+ ....... $50.00
    Picture

  21. L & I. J. WHITE, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. A very high-quality American edge tool maker. Blade is 6 inches, overall length is 13 inches. A couple of spots of rust, but a very nice blade. The iron-ring handle looks like a replacement. Can use some sharpening, Fine ....... $50.00
    Picture

  22. GREENLEE, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 12 3/4 inches . Can use some sharpening and lapping, G+ ....... $45.00
    Picture

  23. PEXTO, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 5 3/4 inches, overall length is 12 3/4 inches . Can use some sharpening, G++ ....... $40.00
    Picture

  24. SAMSON, 7/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Made by Union Hardware Co. Blade is 6 inches, overall length is 13 inches . Chip on edge needs some sharpening, G+ ....... $45.00
    Picture

  25. UNION, 1 INCH SOCKET FIRMER CHISEL. Blade is 7 3/4 inches, overall length is 15 1/2 inches. Crisp. Looks like the hoop was refitted. Can use some sharpening, G++ ...... 45.00
    Picture

  26. THE JAMES SWAN CO., 1 INCH SOCKET FIRMER CHISEL. 6 1/2 inch blade, 13 1/2 inches overall. Some light pitting,Needs some sharpening, G ....... $25.00
    Picture

  27. T.H. WHITHERBY, 1 INCH SOCKET FIRMER CHISEL. 6 inch blade, 13 1/2 inches overall length. Can use some sharpening and lapping, G+ ....... $45.00
    Picture


    Picture

  28. BUCK BROS, 1 INCH BEVEL-EDGE SOCKET FIRMER CHISEL, Blade is 5 1/2 inches, 12 1/2 inches overall. The leather tip of the handle is worn. Can use some sharpening and lapping, G+ ....... $40.00
    Picture

  29. UNION, 1 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/2 inches, overall length is 13 3/4 inches. Very crisp. Can use some sharpening, G+ ...... 35.00
    Picture

  30. ZENITH, 1 INCH BEVEL-EDGED SOCKET FIRMER CHISEL. Blade is 6 1/2 inches, overall length is 14 inches. Can use some sharpening, G++ ....... $45.00
    Picture

  31. BUCK BROS., 1 1/4 INCH TANGED PARING CHISEL. Blade is 7 1/4 inches, overall length is 15 1/2 inches., G+++ ....... $65.00
    Picture

  32. ZENITH, 1 1/4 INCH SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 14 inches. Can use some sharpening, G++ ....... $45.00
    Picture

  33. OUR VERY BEST, 1 1/2 INCH SOCKET FIRMER CHISEL. Bevel edge. Blade is 5 3/4 inches, overall length is 13 1/2 inches. Some minor pitting, the hab ndle is a replacement. Can use some sharpening, G ....... $25.00.
    Picture

  34. UNION HARDWARE CO. 1 1/2 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. Blade is 8 inches, overall length is 16 1/2 inches. Some light patina, but no pitting. Looks like a new handle. Can use some sharpening, G++ ....... $55.00
    Picture

  35. GREENLEE, 2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 13 inches. Some light pitting. Can use some sharpening and lapping, G+ ....... Hold $40.00
    Picture

Mortise Chisels [Click To Order]
  1. GREENLEE, 1/4 INCH SOCKET MORTISE CHISEL. 7 inch blade, 14 overall length. The handle is missing the iron ring. Needs some lapping and sharpening, G+ ....... Sold $30.00
    Picture

  2. 1/4 INCH SOCKET MORTISE CHISEL. I can't read the mark except for USA. 7 inch blade, 15 inches overall length. Needs a bit of sharpening and lapping, G+ ....... $45.00
    Picture

Gouges [Click To Order]

  1. ZENITH, 1/4 inch socket firmer gouge. 6 inch blade, 13 inches overall. Rose City Wood Carvers is written in the channel, G++ ....... $35.00
    Picture

  2. KEEN KUTTER, 1/4 inch socket firmer gouge. 5 3/4 inch blade, 11 1/2 inches overall, G++ ....... $25.00
    Picture

  3. KEEN KUTTER, 1/2 inch socket firmer gouge. 5 1/2 inch blade, 12 inches overall, G++ ....... $30.00
    Picture

  4. THE JAMES SWAN CO., 1/2 inch socket firmer gouge. Outcannel. 6 1/4 inch blade, 12 3/4 inches overall. Some very minor pitting, G ....... $30.00
    Picture

  5. UNION HARDWARE CO., 1/2 INCH SOCKET FIRMER GOUGE, (9/16 in. wide) Incannel. 6 inch blade, 13 1/4 inches overall. Very crisp and shiny, Fine ....... $55.00
    Picture

  6. UNION HARDWARE, 1/2 INCH SOCKET GOUGE, Medium sweep. 6 1/4 inch blade, 13 1/4 inches overall. Very crisp, Fine ....... $45.00
    Picture

  7. JAMES SWAN, 5/8 inch socket gouge. 6 1/4 inch blade, 13 1/4 inches overall. Needs a bit of sharpening, G++ ....... $45.00
    Picture

  8. DIAMOND EDGE, 1 INCH SOCKET FIRMER GOUGE, Incannel. 5 1/2 inch blade, 13 inches overall. Very crisp and shiny. A spot of very light pitting about 3/4 inch up the back. Needs a bit of sharpening, Fine ....... $45.00
    Picture

  9. BUCK BROS, CAST STEEL, 1 INCH SOCKET FIRMER GOUGE.5 1/2 inch blade, 113 inches overall. Shiny-nice with some very minor stain. Needs some sharpening, Fine ....... $45.00
    Picture

  10. GREENLEE, 1 1/2 INCH SOCKET FIRMER GOUGE, (1 9/16 in. wide) Incannel. 6 inch blade, 13 3/4 inches overall. Very crisp and shiny. Some very light pitting on the top of the blade will not affect use, Fine ....... $60.00
    Picture

Adzes [Click To Order]

  1. PLUMB ANCHOR BRAND POLLED CARPENTER'S ADZE, 4 inch wide blade. The poll is mashed a bit on the tip. 30 inch handle. Very nice condition. Needs a bit of sharpening, G++ I will include a new-old-stock handle that will need some fitting. Needs some sharpening, G+ ....... $75.00
    Picture

    Picture of head


Slicks [Click To Order]

  1. JAS SWAN CO, 3 INCH SLICK, This one is really, really nice. Like new. No Pitting. 9 inch blade, 27 inches overall. It needs a minor sharpening and lapping. You're going to love it, Fine+ .......... $295.00
    Picture

  2. D. R. BARTON, 3 1/2 INCH SLICK, 8 1/2 inch blade, 31 inches overall. It is in very nice condition, but could use a little sharpening and lapping because there are a couple of spots of very light pitting. The handle is a new replacement made from canary wood, G+ .......... $175.00
    Picture

    Blade Top Picture

  3. 2 1/2 INCH SLICK, A rare size. No maker's mark. Blade is 9 3/4 inches long. It's in crisp condition, but the top of the bevel has been roughly ground and there is some light etching on the bottom that needs a bit of lapping. The handle is a replacement, and it needs a bit of fitting, G+ .......... $140.00
    Picture

Carving Tools [Click To Order]

Addis Carving Tools [Click To Order]

  1. J. B. ADDIS & SONS, NO. 1, 1/2 inch straight chisel. Nice beech handle has a repaired crack. Needs some sharpening, G+ ........ Sold $25.00
    Picture

  2. S. J. ADDIS, NO. 2, 1/2 inch skew. Nice beech handle. Needs some sharpening, G+ ........ Sold $25.00
    Picture

  3. J. B. ADDIS, NO. 4, 1/2 inch shallow sweep gouge Nice beech handle. Some pitting 3/8 inch up on the blade. Needs some sharpening, G+ ........ Sold $20.00
    Picture

  4. S. J.ADDIS, NO. 5, 1/4 inch shallow sweep gouge. Nice beech handle. Needs some sharpening, G++ ........ Sold $30.00
    Picture

  5. S. J.ADDIS, NO. 5, 1/4 inch shallow sweep gouge. Nice beech handle. Needs some sharpening and lapping, G++ ........ $30.00
    Picture

  6. J. B. ADDIS & SONS, NO. 7, 3/8 inch gouge. Lignum? handle. Needs some lapping and sharpening, G+ ........ Sold $35.00
    Picture

  7. S. J. ADDIS & SONS, NO. 11, 1/8 inch deep sweep gouge. Mahogany handle. Needs some sharpening, G+ ........ Sold $30.00
    Picture

  8. J. B. ADDIS & SONS, NO. 11, 3/16 inch deep sweep gouge. Beech? handle. Needs some sharpening, G++ ........ Sold $32.00
    Picture

  9. J. B. ADDIS, NO. 11, 1/8 inch deep sweep gouge. No rust, small split in the handle, G++ ........ $32.00
    Picture

  10. S. J. ADDIS & SONS, NO. 21, 1/2 inch front-bent chisel. Needs some sharpening, G++ ........ Sold $35.00
    Picture

  11. S. J. ADDIS & SONS, NO. 23, 3/8 inch front-bent skew chisel. Needs some sharpening, G++ ........ Sold $35.00
    Picture

  12. J. B. ADDIS, NO. 25?, 7/32 inch front-bent gouge. Nice handle, Fine ........ $40.00
    Picture

  13. S. J.ADDIS, Cast Steel, NO. 25, 3/4 inch (spoon) gouge, G++ ........ Sold $50.00
    Picture

  14. S. J. ADDIS & SONS, NO. 33, 5/16 inch back-bent gouge, G++ ........ Sold $45.00
    Picture

  15. S. J.ADDIS, NO. 45, 3/8 inch parting tool. Needs some sharpening, G+ ........ $30.00
    Picture



Buck Brothers [Click To Order]
These are the older Buck Brothers carving tools that are high-quality carving tools. I would consider Buck Brothers to have been one of the premier edge-tool makers in the United States.
  1. BUCK BROTHERS, No. 1, 1/4" straight chisel. Has a contemporary exotic-hardwood handle, Fine ..... $40.00
    Picture

  2. BUCK BROTHERS, No. 4, 1/8" shallow sweep gouge, G++ ..... $32.00
    Picture

  3. BUCK BROTHERS, No. 6, 1/2 inch medium sweep gouge, G+ ..... Sold $27.00
    Picture

  4. BUCK BROTHERS, No. 8, 1/16" medium sweep gouge, G++ ..... Sold $32.00
    Picture

  5. BUCK BROTHERS, No. 8 Gouge (marked 9), 3/8 inch. Octagon handle, G+ ........ Sold $25.00
    Picture

  6. BUCK BROS,CAST STEEL, No. 9 (marked 8) Gouge, 9/16 inch. Larger handle w/ brass ferrule. Couple of 2 inch splits in handle, but it is pretty solid, Steel is Fine ........ Sold $30.00
    Picture

  7. BUCK BROTHERS, No. 11, 1/4" deep sweep gouge, G+ ..... $25.00
    Picture

  8. BUCK BROTHERS, No. 11, 5/16" deep sweep gouge, G++ ..... Sold $32.00
    Picture

  9. BUCK BROTHERS,No. 11 Gouge, 7/16 inch. Looks like a file handle, Steel Fine ........ $30.00
    Picture

  10. BUCK BROTHERS, No. 17, 1/4" medium sweep bent gouge, G++ ..... $34.00
    Picture

  11. BUCK BROTHERS, Cast Steel, No. 13, 1/2" medium sweep bent gouge, thumbnail, G++ ..... Sold $34.00
    Picture

  12. BUCK BROTHERS, No. 40, 3/16" bent parting tool, G++ ..... $35.00
    Picture

  13. BUCK BROTHERS, No. 43, 1/4 inch spoon parting tool. Has a split in the handle, G+ ..... $35.00
    Picture


Miscellaneous Carving Tools [Click To Order]
  1. MILLERS FALLS CARVING TOOL SET, NO. 109. A set of 9 carving tools from the 1930s, with maple handles. Overall length is about 8 inches. 1/4 straight chisel, 1/2 straight chisel, 3/8 bent, 1/4 sweep gouge, 1/4 skew, 1/4 gouge, 7/16 gouge, 1/2 gouge, 1/4 veining tool. The handles have some sun-fading on one side. Some minor rust and some light pitting, but the ends will clean up with some sharpening. Mahogany? case, G++ ..... Sold $125.00
    Picture

  2. MILLERS FALLS CARVING TOOL SET, NO. 107. A set of 5 carving tools with maple? handles. 3/8 inch bent straight, 1/4 inch med. sweep gouge, 3/8 inch skew, 3/16 inch deep sweep gouge, 1/8 inch parting tool. 5 inches long. With the box bottom, which has the label, so, I don't know what the cover was. Includes the slip stone. Lightly used, Fine ..... Sold $55.00
    Picture

  3. H. TAYLOR CARVING TOOL SET. A set of 13 carving tools with the acorn logo.
    No. 2 skew; Gouges: No. 3 - 5/8", No. 8 - 3/8", No. 9 - 1/2", No. 11 - 1/2"; bent gouges: No. 12 - 1/4", No. 13 - 7/8", No. 14 - 1/2", No. 19 - 1/2", No. 19 - 3/4"; No. 24 - 1/4" spoon gouge; No. 41 - 1/4" parting tool; and No. 67 - 1/2" fishtail gouge.
    All of them are about 10 inches long and in great condition with no rust or pitting.In a denim roll that is attached to a zippered pouch, Fine+ ........ $295.00
    Picture
    Picture - roll

  4. MILLERS FALLS, 1/8 inch medium sweep gouge. Rosewood handle. Part of their longer set, G+ ..... $20.00
    Picture

  5. MILLERS FALLS, 1/2 inch skew. Rosewood handle. Part of their longer set, G+ ..... Sold $20.00
    Picture

  6. _MARPLES & SONS No. 1 3/16 chisel, G++ ..... Sold $22.00
    Picture

  7. KEEN KUTTER, No. 2, 9/32 inch skew, G++ ..... $35.00
    Picture

  8. C. MAIERS (England), Fishtail gouge, 3/8 inch, No. 3 sweep. Walnut? handle. Needs some sharpening, G++ ..... Sold $30.00
    Picture

  9. HERRING BROTHERS, London, No. 3, 5/8 inch gouge, G+++ ..... Sold $35.00
    Picture

  10. HERRING BROTHERS, London, No. 4, 7/8 inch shallow sweep gouge. Tight split in handle, Fine ..... Sold $45.00
    Picture

  11. SPEAR & JACKSON, 3/8" shallow sweep gouge, G+ ............ $15.00
    Picture

  12. MOULSON BROTHERS, 1/2" shallow sweep gouge, G+ ............ $20.00
    Picture

  13. HERRING BROTHERS, London, No. 7, 1/8 inch gouge. Big 6 inch handle, G++ ..... Sold $35.00
    Picture

  14. HERRING BROTHERS, London, No. 7, 3/16 inch gouge, Thumbnail, has a little bit of light rust, G+ ..... $20.00
    Picture

  15. WARD, CAST STEEL,, No. 7, 3/8 inch gouge, Thumbnail. Nice fruitwood handle, G+ ..... Sold $30.00
    Picture

  16. HERRING BROTHERS, London, No. 8, 1/4 inch gouge, Thumbnail, G+ .....Sold $26.00
    Picture

  17. SPEAR & JACKSON, No. 8, 1/4 inch gouge, thumb nailed. Fancy handle, G+ ............ $25.00
    Picture

  18. HERRING BROTHERS, London, No. 14, 1/2 inch curved gouge, G++ ..... Sold $30.00
    Picture

  19. H. Taylor, No. 14, 7/8 inch bent gouge. Shallow sweep. An earlier one with mahogany handle. Remnants of a straw finish, G++ ..... $50.00
    Picture

  20. I. SORBY, No. 15?, 11/16 inch medium sweep bent gouge with boxwood handle, Fine ..... $45.00
    Picture

  21. H. Taylor, No. 15, 1/2 inch bent gouge. An earlier one with mahogany handle. Straw finish, G+++ ..... $40.00
    Picture

  22. H. Taylor, No. 17, 1 inch bent gouge. Medium sweep. An earlier one with mahogany handle. Remnants of a straw finish, G++ ..... $50.00
    Picture

  23. MARPLES & SONS, Sheffield, No. 19, 9/16 inch bent gouge. Has a contemporary purpleheart? handle, Fine ..... $50.00
    Picture

  24. KEEN KUTTER, No. 20, 3/32 inch curved gouge, G++ ..... $30.00
    Picture

  25. HERRING BROTHERS, London, No. 22, 1/4 inch front bent (spoon) chisel, right corner, Fine ..... $35.00
    Picture

  26. H. TAYLOR, No. 28, 1/4 inch front bent gouge. An earlier one with mahogany handle. Thumbnail edge, G++ ..... $40.00
    Picture

  27. UNMARKED, No. 29, 1/8 inch front bent gouge. The tip has been modified to be a straight chisel. Mahogany handle, G++ ..... $30.00
    Picture

  28. UNMARKED, No. 29, 5/8 inch front bent gouge. Mahogany handle, Fine ..... $35.00
    Picture

  29. UNMARKED, No. 26, 11/16 inch front bent gouge. Mahogany handle has a nick on the side to show sweep, G++ ..... $35.00
    Picture

  30. D. R. BARTON, No. 30, 1/8 inch front bent gouge. Mahogany handle has a nick on the side to show sweep, G++ ..... $35.00
    Picture

  31. HERRING BROTHERS, London, No. 31, 3/8 inch front bent gouge. Large 6 inch handle, Fine ..... $45.00
    Picture

  32. H TAYLOR, London, No. 39, 3/8 inch parting tool,G+ ..... $30.00
    Picture

  33. D. R. BARTON, No. 40, 1/2 inch bent parting tool. Needs a bit of sharpening, G++ ..... $45.00
    Picture

  34. FROST, NORWICH, No. 40, 1/4 inch parting tool. Handle cracked G++ ..... $23.00
    Picture


. Back To Tool Index Back to Homepage