This is a list of miscellaneous tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

This section has Doweling Machines, Miscellaneous Wood Working Tools, including Jointer Fences, Metal Working, Caulking Irons, Wheelwright and Sheet-metal Tools

Back To Tool Index Back to Homepage

Wood Working Tools

No. 77 Doweling Machine and Cutters ... Click To Order

1. STANLEY NO.77, DOWELING MACHINE Comes with the 3/8 cutter. A really nice one. Almost all of the black enamel remains. Note: The threads on the front screw are left-handed - that's why the toggle-screw gets so banged up or destroyed. Includes the original instructions, Fine ............. Sold $395.00
   Picture

   Doweling Machine Parts Click To Order
   1/4 INCH CUTTER HEAD, Has had little use. 95% of the black enamel remains. In a pretty-nice box with wrapper, Fine ............. $130.00
   Picture

2. 1/4 INCH CUTTER HEAD, Has had little use. 98% of the black enamel remains. Some light patina on the bare metal, Fine ............. Sold $100.00
   Picture

3. 3/8 INCH CUTTER HEAD, Has had little use. This is the one that came with the machine. 98% of the black enamel remains, Fine ............. Sold $80.00
   Picture

4. 1/2 INCH CUTTER HEAD, 95% of the black enamel remains. Some light patina on the bare metal surfaces. The S R & L box is pretty nice, Fine ............. $130.00
   Picture

5. 3/4 INCH CUTTER HEAD, Has had little use. 98% of the black enamel remains. Original box with wrapper, Fine ............. Sold $130.00
   Picture

6. STANLEY NO.77, DOWELING MACHINE, GEAR WHEEL ONLY. There are two minor chips (1/8 and 3/16 in. long) on the gears that don't affect use. Patina on the bare metal surfaces, G+ ............. $55.00
   Picture

Other Woodworking Click To Order

1. STANLEY NO. 89 CLAPBOARD GAUGES (pair). Use them to hold clapboard siding in place for measurement and nailing. A pair with the Jan 31, [18]88 patent date stamped on the back end. 96% nickel plating. The gauge slips under the siding board below, and locks into place to hold the current board. Move the handle sideways for a spur to lock them in place, Fine ........... $95.00
   Picture

2. STANLEY NO. 89 CLAPBOARD GAUGE. Used to hold clapboard siding in place for measurement and nailing. The gauge slips under the siding board below, and locks into place to hold the current board. 96% nickel plating. Move the handle sideways for a spur to lock them in place, Fine ........... $45.00
   Picture

3. STANLEY NO. 88 CLAPBOARD MARKER. Runs up against the corner boards to exactly mark the siding, Looks like it has been cleaned, G+ ........... Sold $25.00
   Picture

4. STARRETT NO. 111 STAIR GAGE FIXTURES, They fit on any framing square and are used to layout stair stringers and rafter cuts. Most of the nickel plating remains, G+ ........... $20.00
   Picture

5. STARRETT NO. 470 STAIR GAGE FIXTURES, six-sided button type. They fit on any framing square and are used to layout stair stringers and rafter cuts. Most of the nickel plating remains, G++ ........... $15.00
   Picture

6. STANLEY NO. 0HS HAND SCRAPER, 3 by 5 inch hand scraper blade used for final finishing of hardwood surfaces. New Old Stock, Wrapped in the sharpening instructions. There is some light rust, G+ ............. $10.00
   Picture

7. L. & I. J. WHITE, TURNING GOUGE, 1 1/8 inch wide. There's a short split in the handle, G++ ............. $50.00
   Picture

8. DISSTON BURNISHER, Use this one to turn the edge on scraper blades, etc., G+ ............. $25.00
   Picture

9. TIMBER SCRIBE, Not marked by the Mfr. Beech handle with brass ferrule. Very nice condition, Fine ............. $65.00
   Picture

10. STANLEY NO. 207, BENCH STOP, Stanley notched rectangle logo. A tool that will immediately be useful to the carpenter, cabinetmaker or anyone interested in woodworking of any kind where a bench is necessary. It can be inserted in the top of a bench by boring a 9/16-inch hole. Its height is adjustable-a stiff spring holds it in position. 98% of the nickel plating remains, Fine + ............. $30.00
    Picture

11. STANLEY NO. 386, JOINTER FENCE, Brand-new. Has the Sweetheart logo on the locking bar. 99% of the nickel plating remains - there is a few small spots of stain from storage. In the original box, which is nice, with a small separation in the seam at the front and back of the bottom. With the original instructions, Fine+ ........... $295.00
    Picture

12. STANLEY NO. 386, JOINTER FENCE, Has the notched-rectangle logo on the adjusting bar. Fits on No. 5- through 8 sized planes. 98% of the nickel plating remains, Fine ........... $180.00
    Picture

13. THE ALEXANDER ADJUSTABLE JOINTER GAUGE, Patented July 16, 1872. Fits on any wooden plane - jack to jointer. This one isn't marked, but they were sold by Millers Falls. Has screws to attach it to a plane, G+ ........... $90.00
    Picture

14. STANLEY NO. 28 CORNERING TOOL, Sweetheart logo ... Cuts 1/16 and 1/8 inch radius corners on the edge of a board. Not nickel plated, may be WWII, G+ ........... $25.00
    Picture

15. STANLEY NO. 29 CORNERING TOOL, Sweetheart logo ... Cuts 1/4 and 3/8 inch radius corners on the edge of a board. Not nickel plated, may be WWII, G+ ........... $25.00
    Picture

1. MILLERS FALLS NOS. 1500 and 1550, 3/16 inch STEEL LETTERS AND NUMBERS SET. Complete, and have seen little use, Fine ........... $75.00
   Picture

2. Boxed STARRETT NO. 1 CUT NIPPERS, Adjustable jaws. 7 inch length. This one has had little use and comes with an extra set of jaws, Fine ........... $80.00
   Picture

3. GTD CO.,GREENFIELD, MASS, DRILL INDEX. For fractional drills, 7 3/4 inches long. 1/16 through 1/2, by 64ths. Nickle plated cast metal, G++ ........... Sold $45.00
   Picture

4. STANLEY NO. 710 VISE, in orange and black paint. It's useful to have one that swivels on it's base, which lets you work from different angles. It has 2 1/2 inch jaws, and is ready to go to work G+ ........ $65.00
   Picture

5. TOP & BOTTOM SWAGE, 2 INCH Quikwerk. 1 inch tang. Two corners of the bottom are slightly rounded, New-old stock. ............. $70.00
   Picture

6. TOP & BOTTOM SWAGE, 3/4 INCH Beall Bros., Iron City. 5/8 inch tang. New-old stock. ............. $70.00
   Picture

7. BOTTOM FULLER, 1 inch tang. 1 inch across the diameter. Has some pitting, G ............. $30.00
   Picture

1. CAHILL - DECK CAULKING IRON, 2 1/4 inches wide, G+ ....... $22.00
   Picture

2. C. DREW STRAIGHT CAULKING IRON, 2 3/8 inches wide, G+ ....... Sold $22.00
   Picture

3. C. DREW STRAIGHT CAULKING IRON, 2 3/8 inches wide, with leather guard, G+ ....... Sold $22.00
   Picture

4. W. D. CARVER CAULKING IRON, Three crease. 2 3/8 inches wide, G+ ....... Sold $28.00
   Picture

5. CAHILL BENT CAULKING IRON, 2 inches wide, G+ ....... Sold $25.00
   Picture

6. STORTZ FID, Wooden handle, G+ ....... $25.00
   Picture

1. TRAVELLER, Hand wrought - about 9 inch diameter. Some rust and light pitting, but still usable, G .... $45.00
   Picture

2. SILVER & DEMMING, No. 1. Pat July 25, 1854, extended, July, 1868. The plate has a spiral gear that adjusts the three clamps. Some grime and patina, but not rusted up. That spiral gear is chipped on the last of the edge, which is about 1/8 inch wide. The jaws clamp over 5 teeth, so it still works. The edge may have been broken from handling, G+ .........$295.00
   Picture

   
   Picture

3. HUB BORER, It's rusty and I don't see a Mfr. mark. 40 inch overall length. Missing the crank handle and cutters. You probably have references that show how to use it, and make the missing parts, G ... $200.00
   Picture

4. PECK, STOW & WILCOX, IMPROVED WOOD ROOFING FOLDER WITH GAUGE. Used for fitting standing seam roofing.
   After cutting corners, turn lock on ends of the sheet. Then place the sheet in the folder with lock down in the slot of the plate, which will bring opposite lock in the slot in the wood at the end of the plate.
   It looks like it is for sheets 26-27 inches long for the llocks to fit in the slots. There are two holes in the bottom wood frame. There is a 6 inch split from the end through the one hole, which will need a bit of repair, G+ .... $125.00
   Picture

Back To Tool Index Back to Homepage