This is a list of metallic planes for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll down this list and click to see an image. This section is divided into Stanley Planes, Other Brands, Block Planes, Scraper Planes, and Combination Planes.
Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

I have a New Plane Showcase that has thumbnail pictures and descriptions of some interesting planes. I also have information of some that have been sold. I am breaking up the Showcase into separate categories to make it easier to use. Click here to go to the Plane Showcase

  Wooden Planes     Back To Tool Index    Back to Home page

Stanley Planes [CLICK TO ORDER]

1. STANLEY NO. 1 SMOOTH PLANE, Sweetheart trademark on the full-length cutter. 92% of the japanning on the body. Rosewood low knob and handle are crisp. The handle has a sliver off of the top left side.
   This one has been used, but not abused. There has been speculation that carpenters that used a No. 1 held it across the top instead of trying to use the handle and knob. The wear-patterns on this one support that theory, G+ ........ $1425.00
   Picture

2. STANLEY NO. 2 SMOOTH PLANE, Notched-rectangle logo on the cutter with about 1 3/4 inches of meat left. Almost all of the japanning on the body remains. The nickel plating on the cap is very nice. Rosewood tall knob and handle have a few chips to the finish. There is some minor patina on the bare metal surfaces from age, Fine ....... $395.00
   Picture

3. STANLEY NO. 3 SMOOTH PLANE, Notched-rectangle logo on the cutter with 1 5/8 inches of meat left. 95% of the japanning on the body. Crisp, rosewood handle and tall knob. Some very minor pitting to the bare metal surfaces. It has been lightly cleaned, G+ .... Sold $80.00
   Picture

4. STANLEY NO. 3 SMOOTH PLANE, ca. 1950. Notched-rectangle logo on the full-length cutter. 99% of the japanning on the body. The nickel plating on the cap is a little bubbly. Crisp rosewood handle and tall knob have some minor tool-box dings. There is some slight patina on the bare metal surfaces. Some minor pitting on the sole will not effect use, G++ .... $80.00
   Picture

5. STANLEY NO. 3C SMOOTH PLANE, Notched-rectangle logo on the cutter with 1 3/4 inches of life left. 95% japanning with some dirt. Crisp dark rosewood handle and tall knob have some tool-box dings. Has been lightly cleaned, G++ ........ $90.00
   Picture

6. STANLEY NO. 4 SMOOTH PLANE, 1910 patent date cast in the bed. Sweetheart logo on the full-length cutter. 98% japanning. The rosewood handle and tall knob are crisp. The sole is very nice. There are some spots of patina on the bare metal surfaces, Fine ..... Sold $120.00
   Picture

7. STANLEY NO. 4 SMOOTH PLANE, Later Type, Notched-rectangle mark on the cutter, with 1 3/4 inches of meat left. 92% japanning. The rosewood handle and tall knob are crisp but there are a few tool-box dings. Some light patina on the bare metal surfaces, G+ ..... $80.00
   Picture

8. STANLEY NO. 4 SMOOTH PLANE, (18)92 patent date on the cutter with 1 3/4 inches of life. (19)02 patent dates cast in the bed. 96% japanning. Dark rosewood handle with early, forward-sweeping curves and low knob are crisp, but have some tool-box dings. Some light patina and light pitting (on the back of the sole) which won't affect use on the bare metal surfaces. Has been lightly cleaned, G++ ........ Sold $80.00
   Picture

9. STANLEY NO. 4 SMOOTH PLANE, Notched-rectangle logo on the full-length cutter. 99% japanning. Dark rosewood handle and tall knob are crisp with some tool-box dings to the finish. The bare metal surfaces have been lightly cleaned, Fine ........ Sold $90.00
   Picture

10. STANLEY NO. 4C SMOOTH PLANE, 1910 patent date cast in the bed. Sweetheart logo on the cutter, with 1 3/4 inches of blade left. Rosewood handle and tall knob are crisp but have a some minor dings. 95% japanning. Some patina to the bare metal surfaces, G++ ........ Hold $95.00
    Picture

11. STANLEY NO. 4C SMOOTH PLANE, 92 patent date on the nice, full length cutter. B casting mark on the bed dates to 1900. Rosewood handle and short knob are pretty crisp but have a few minor nicks and dents. 90% japanning. Some minor roughness on the sole might want to be lapped. A good plane, G+ ..... Sold $80.00
    Picture

12. STANLEY NO. 4 1/2 SMOOTH PLANE, Notched rectangle logo on the cutter with 2 inches of meat left. Crisp dark rosewood handle and tall knob have some tool-box dings. 93% japanning. There is some minor scratching on the sole. Has been lightly cleaned. A nice user, G+ ......... Sold $95.00
    Picture

    Note: I have jointer fences in my miscellaneous section They will fit both wooden and metallic planes from jack-size to jointer.

13. STANLEY NO. 5, JACK PLANE, Notched-rectangle logo on the full-length cutter. 99% japanning. Dark rosewood handle and tall knob are crisp, but have some chips to the finish. Fine ........... $100.00
    Picture

14. STANLEY NO. 5, JACK PLANE, Made in Canada cast in the bed and on the sweetheart cutter with 1 3/4 inches of meat left. 99% japanning. Crisp dark rosewood handle and tall knob. Some minor patina on the bare metal surfaces, G+++ .............. $80.00
    Picture

15. STANLEY NO. 5, JACK PLANE, Sweetheart mark on the cutter with 11/2 inches of life left. 1910 patent date cast in the bed. 95% japanning remains. Rosewood handle and tall knob are nice, but have a few dings. Some light patina on the bare metal surfaces. It could use a light cleaning. A very nice user, G++ ..............Sold $90.00
    Picture

16. STANLEY NO. 5, JACK PLANE, Notched-rectangle logo on the full-length cutter. 99% japanning. There is a hang-hole in the rear. Rosewood tall knob and handle, which has a break in the middle, and a paint smear. The plane is crisp with some minor stain and rust. A great user, G++ .............. $55.00
    Picture

17. STANLEY NO. 5C, JACK PLANE,Sweetheart trademark on the cutter with 1 3/8 inches of life left. 90% japanning on the body, and nickel plating on the earlier key-hole cap. Rosewood handle and tall knob are crisp with some tool-box dings and paint spatters. Some minor patina on the bare metal surfaces. Could use a light cleaning. A good user, G+ ........... $70.00
    Picture

18. STANLEY NO. 5C, JACK PLANE, Type 11. 3 patent dates cast in the bed, T trademark on the cutter with 2 inches of meat left, but it needs a little lapping. 95% japanning. Crisp dark rosewood handle and low knob. Some minor patina on the bare metal surfaces, G++ ........... Sold $100.00
    Picture

19. STANLEY NO. 5C, JACK PLANE, 1892 patent date on the cutter, which has 1 1/4 inches of life left. This one has been cleaned and repainted. The tip of the handle has been replaced. A great user, G+ .............. Sold $40.00
    Picture

20. STANLEY VICTOR NO. 1105, JACK PLANE, Notched rectangle mark on the full-length cutter. Grey enamel on the bed. Very crisp stained hardwood handle and tall knob have a few dings to the finish, G++ ........... $55.00
    Picture

21. STANLEY NO. 5 1/4 JUNIOR JACK PLANE, Made in USA trademark on the cutter which has 1 3/4 inches of meat left. Virtually all of the japanning and nickel plating remains. Crisp ebonized handle and tall knob have some tool-box dings to the finish, Fine+ .... $95.00
    Picture

22. STANLEY NO. 5 1/4 JUNIOR JACK PLANE, Made in USA trademark on the cutter which has 1 3/4 inches of meat left. Because of the number 247 on the back of the cutter, I believe this plane was made in 1947. 97% of the japanning remains. Crisp rosewood handle and tall knob have some tool-box dings to the finish. Some minor etching to the sole will be OK, but could be easily lapped out. Has been lightly cleaned, G++ .... Sold $105.00
    Picture

23. STANLEY NO. 6 FORE PLANE, Notched-rectangle trademark on the full-length cutter. Almost all of the japanning remains, except it is dull in the back probably because it was cleaned with an abrasive. The rosewood handle and tall knob are crisp with some chipping to the finish. Some areas of very light pitting to the sole won't effect use. Has been lightly cleaned, G+ ......... $80.00
    Picture

24. STANLEY NO. 6C FORE PLANE, Notched-rectangle logo on the full-length cutter. 96% japanning. The rosewood handle and tall knob are crisp with some tool-box dings. A really nice plane, Fine ......... $120.00
    Picture

25. STANLEY NO. 7, JOINTER PLANE, Notched rectangle logo on the cutter with 2 inches of life left. 97% japanning remains. Some nickel plating is missing on the cap. The rosewood handle and tall knob are very crisp, with some chips to the finish. There is some light patina on the bare-metal surfaces, G++ ...... Sold $145.00
    Picture

26. STANLEY NO. 7C, JOINTER PLANE, Type 11. 1902 1910 patent dates cast in the bed. T trademark on the cutter with 1 3/4 inches of meat left. 93% japanning. Crisp rosewood handle and low knob are nice with some minor tool-box dings. Some patina on the bare metal surfaces, G++ ...... Sold $155.00
    Picture

27. STANLEY NO. 8 JOINTER PLANE, 1910 patent date cast in the bed. Sweetheart trademark on the cutter with 1 3/4 inches of meat. 85% japanning. Nice dark rosewood handle and tall knob. Looks like it was lightly cleaned, G++ ...... Sold $185.00
    Picture

28. STANLEY NO. 8 JOINTER PLANE, Type 11. 3 patent dates on the bed. The full-length cutter has the V trademark. Has the adjustment screw behind the frog. 95% japanning. Very nice rosewood handle and low knob. Very crisp with some light patina on the bare metal surfaces, G++ ...... $235.00
    Picture

29. STANLEY NO. 8C JOINTER PLANE, (19)10 patent date cast in the bed. Sweetheart cutter that has about 2 inches of meat left. 70% japanning, but the rest is dark, so it looks pretty good. Small chip out of the side of the rosewood handle, but it and the rosewood tall knob are crisp. Has been lightly cleaned. A good, solid user, G+ ...... $175.00
    Picture

    STANLEY NO. 9 1/2 BLOCK PLANE, Block Planes are listed farther down, past Other Planes

30. STANLEY NO. 10, CARRIAGE MAKER'S RABBET PLANE, Notched rectangle logo on the cutter, which is full-length. 99% japanning. Crisp rosewood handle and tall knob. Some very slight patina on the bare metal surfaces, Fine+ ..........Sold $275.00
    Picture

31. STANLEY NO. 10 1/2, CARRIAGE MAKER'S RABBET PLANE, This one is the smooth plane size. (18)92 patent date on the cutter with 3/4 inches of meat left. 93% japanning on the body. Crisp early rosewood handle and low knob. Some roughness on the sole won't affect use, but could be lapped out. A very nice user, G++ .......... $225.00
    Picture

32. STANLEY NO. 20, CIRCULAR PLANE, Later japanned model. Notched-rectangle logo on the full-length cutter. The heaviest circular plane made by Stanley, it's considered the best one for using. 96% Japanning remains. Very clean sole. A great plane, Fine ............... $265.00
    Picture

33. STANLEY NO. 20, CIRCULAR PLANE, Early nickel plated model. (18)92 patent date on the cutter, 2-7-(18)93 patent date cast in the body. The heaviest circular plane made by Stanley. It's considered the best one for using. 95% nickel plating remains. There is some stain on the top of the sole from age. The bottom is a lot nicer. A very good example of an early plane, G+ ............... $275.00
    Picture

34. STANLEY NO.39- 3/8 INCH, DADO PLANE, Sweetheart logo on the cap screw. Complete with good length to the cutter and spurs. Most of the japanning remains, with some dirt. Where it is worn, like on the sides of the handle, there is patina which looks good. The bare metal surfaces have some patina, G++ ............ $155.00
    Picture

35. STANLEY NO.39- 3/4 INCH, DADO PLANE, Sweetheart logo on the cap screw. Complete with good length to the cutter and spurs. Most of the japanning remains, with some dirt. Where it is worn, like on the sides of the handle, there is patina which looks good. The bare metal surfaces have some patina, G++ ............ $185.00
    Picture

36. STANLEY NO. 40, SCRUB PLANE, Used to quickly reduce the thickness of a board to the required size. Sweetheart logo on the cutter dates this one to around 1930. 95% japanning. Beech handle and tall knob are nice (the front knob may have been replaced), G+ ........ $110.00
    Picture

37. STANLEY NO. 40, SCRUB PLANE, Used to quickly reduce the thickness of a board to the required size. Sweetheart mark on the cutter. 80% japanning. Beech handle and tall knob are nice, but have tool-box dings, G+ ........Sold $90.00
    Picture

38. STANLEY NO. 48, TONGUE & GROOVE PLANE, Used to make a 5/16 inch tongue and groove joint on 3/4 inch to 1 1/4 inch boards, centering on 7/8 inch stock. B casting mark on the body dates this one to around 1900. Almost all of the nickel plating remains. One of the cutters has been sharpened on both ends, Fine+ ........ $135.00
    Picture

39. STANLEY NO. 48, TONGUE & GROOVE PLANE, Used to make a 5/16 inch tongue and groove joint on 3/4 inch to 1 1/4 inch boards, centering on 7/8 inch stock. An early nickel-plated one with the ivy design on the handle. S casting marks and the same thumb screws as the japanned model, but nickel plated (which I haven't seen before). 80% of the nickel plating remains, G+ ........ $105.00
    Picture

40. STANLEY NO. 62, LOW-ANGLE PLANE, Jack plane size with adjustable throat. Sweetheart logo on the cutter that still has good length. 95% japanning remains. Dark rosewood handle and knob have some tool-box dings. There is some patina and some very slight roughness on the bare metal surfaces. There are no chips or cracks in the throat. A very nice plane and a good user, G++ ........ Sold $425.00
    Picture

41. In the Box STANLEY NO. 71, OPEN-THROAT ROUTER, Looks like it's about the last Made in USA offering from Stanley. Has had little use. Complete with the shoe for closed-throat work, fence, and three cutters. 99+% nickel plating remains - the top is a little dusty. There are a few scuffs on the finish of the handles. In the original box with some damage, with the original instructions, Fine ........ $135.00
    Picture

42. In the Box STANLEY NO. 71, OPEN-THROAT ROUTER, Made in USA. Complete with three cutters, fence and the shoe for closed-throat work. 99% of the nickel plating remains. Really nice. In the box (with some minor damage on the top), with the original instructions, Fine+ ........ $145.00
    Picture

43. STANLEY NO. 71, OPEN-THROAT ROUTER, Pat. 9-10-(19)07 cast in the bed. Complete with three cutters, and the shoe for closed-throat work. Most of the nickel plating remains on the top, the bottom is worn. Ebonized hardwood handles are from a later router. I will include a copy of the instructions, G+ ........ Sold $60.00
    Picture

44. STANLEY NO. 71, OPEN-THROAT ROUTER, Made in USA. WW II vintage Complete with three cutters, fence and the shoe for closed-throat work. 96% of the japanning remains. Ebonized hardwood handles have some scrapes to the finish. Has some dirt and stain, and could use a minor cleaning, G++ ........ Sold $90.00
    Picture

45. STANLEY NO. 71 1/2, CLOSED-THROAT ROUTER, 1901 patent date cast in the bed. Maple handles are very nice. The nickel plating is dull and it is worn off on the bottom. Complete with the 1/4 and 1/2 inch cutters. I will include a copy of the instructions, G+ ........ $55.00
    Picture

46. STANLEY NO. 72, CHAMFER PLANE, STANLEY and No. 72 cast in the body. J trademark on the cutter, that has good length. 85% japanning. The rosewood handle and knob are crisp but have some minor tool-box dings, G++ ........ $465.00
    Picture

47. Boxed STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, Has the notched rectangle logo on the cutter. Has the cutter-adjustment lever. 99%+ black japanning remains. Complete with fence, depth stop and spur. In the original box, which is rough with a "Stanley Planes For Weatherstrip Work" leaflet,Fine ........ $115.00
    Picture

48. STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, Notched-rectangle logo on the cutter. Later model with the cutter-adjustment lever. 99% black japanning remains. Complete with fence, depth stop and spur. Some light patina from age on the bare metal surfaces, Fine ........ $90.00
    Picture

49. STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, This one is unmarked, but made by Stanley for some other company. Later model with the cutter-adjustment lever. 98% black japanning remains. Complete with fence, depth stop and spur. Very nice, Fine ........ $70.00
    Picture

    There may be more No. 78-type planes, made by Sargent and Millers Falls, listed in the Other Planes category, below

50. STANLEY NO. 79, SIDE RABBET PLANE, Notched rectangle logo on the cutters. A later Made in USA model with the fence. Almost all of the nickel plating remains, Fine ........ $100.00
    Picture

51. STANLEY NO. 90, BULL NOSE RABBET PLANE, Made in USA. Notched-rectangle logo on the cutter. These are much better and finished a lot nicer than the ones coming out of England. The top comes off so it can be used as a chisel plane, too. 99% nickel plating,Fine+ ........ Sold $125.00
    Picture

52. STANLEY NO. 92, CABINET MAKER'S RABBET PLANE, This is a type I, with the 3.13.1900 patent date on the cutter, ant the bottom front is hollow with a separate plate pinned to the sides. 3/4 inches wide and 5 1/2 inches long. The top comes off so it can be used as a chisel plane, too. 90% nickel plating remains, G+ ........ $170.00
    Picture

53. STANLEY NO. 93, CABINET MAKER'S RABBET PLANE, Made in USA mark on the cutter and the plug in the front. 1 inch wide and 6 1/2 inches long. They are handy for cleaning up rabbets and tenons. These are much better and finished a lot nicer than the ones coming out of England. The top comes off so it can be used as a chisel plane, too. 98% nickel plating remains, Fine ........ $225.00
    Picture

54. STANLEY NO. 95, EDGE TRIMMING BLOCK PLANE, Used to plane the edges of boards square to the face. Notched rectangle logo on the cutter. Almost new with 99% japanning, Fine ........ Sold $165.00
    Picture

55. Boxed STANLEY NO. 98, RIGHT-HANDED; and NO. 99, LEFT-HANDED, SIDE-RABBET PLANES, A pair of later models with the depth stop on the back. 98% nickel plating. The No. 98 box is pretty nice, the No. 99 box is missing a side and the back and has some tears.Planes are, Fine+ ........ $365.00
    Picture

56. STANLEY NO. 113, CIRCULAR PLANE, A very nice example of a late Type II... Front knob has the 1877 patent date. 1892 date on the cutter. Nickel plated side-wheel with four holes. 95% japanning and great nickel plating. A very clean, original plane. Owner's name on the edge of the sole, Fine ........ $245.00
    Picture

57. STANLEY NO. 146, MATCH PLANE, Pat'd Jan 20 03 cast in the body, ca 1905. The smallest size, for planing a tongue and groove on boards 3/8 to 1/2 inch thick. A plane in near-new condition with 95% nickel plating with some dirt, Fine .................. $210.00
    Picture

58. STANLEY NO. 148, MATCH PLANE, Made in USA logo on the tongue cutter and cast in the body. For planing a tongue and groove on boards 3/4 to 1 inch thick. A plane in near new condition with 98% nickel plating, which is a little dull in some places. Very nice, Fine .................. $165.00
    Picture

59. STANLEY NO. 191, 1 1/4 INCH RABBET PLANE, Made in USA trademark on the cutter. 98% shiny japanning remains with a little dirt. Complete with depth stop and spur. Has seen little use, Fine .................. Sold $55.00
    Picture

60. STANLEY NO. 191, 1 1/4 INCH RABBET PLANE, Made in USA trademark on the cutter. 97% shiny japanning remains. Complete with depth stop and spur. Has seen little use, Fine .................. Sold $55.00
    Picture

61. Boxed STANLEY NO. 271 ROUTER, Made in USA. 99% nickel plating. 3 inches long, and handy for small work. Can be set for closed or open throat work. In the original box which is nice, with instructions, Fine .............. $120.00
    Picture

62. STANLEY NO. 271 ROUTER, Made in USA. This small router is 3 inches long, and handy for small work. Can be set for closed or open throat work. 97% of the nickel plating remains, with a bit of dirt, Fine .................. $75.00
    Picture

63. STANLEY NO. 289 RABBET AND FILLETSTER PLANE, This is the heavy-duty one with the skewed cutter, which will shave fine cuts. Sweetheart logo on the cutter. Complete with depth stop, spur and the correct fence. 96% japanning remains. Has been lightly cleaned, G+++ ........... Sold $425.00
    Picture

64. STANLEY BEDROCK NO. 603, SMOOTH PLANE, ca. 1931-32, with flat sides and the three adjusting screws behind the frog. Sweetheart trademark on the almost full-length cutter. Stanley on the cap. 80% japanning. Crisp rosewood handle has a tiny flake missing from the top, and. tall knob. Has some patina on the bare metal surfaces, G++ ............ Sold $245.00
    Picture

65. STANLEY BEDROCK NO. 605, JACK PLANE, Later model with flat sides and the three adjusting screws behind the frog. 1895 and 1910 patent dates cast in the bed. V logo on the cutter with 1 3/4 inches of meat left. STANLEY BEDROCK on the cap. 95% japanning. Nice rosewood handle and tall knob have some minor tool-box dings. G++ ............ Sold $210.00
    Picture

66. STANLEY BEDROCK NO. 605C, JACK PLANE, Later model with flat sides and the three adjusting screws behind the frog. Made in USA trademark on the cutter with 2 inches of meat left, Stanley on the cap. 95% japanning. Nice rosewood handle and tall knob have some minor tool-box dings. G+ ............ $175.00
    Picture

1. EDWIN HAHN NO. 3 SMOOTH PLANE, (No. 4 size) Wilkes-Barre, Penn. 1908-18.
   Hahn was apparently influenced by Siegley, although there is no known connection.
   Aside from an unusual lateral adjuster, the main feature seems to be that the chip-breaker is attached to the cap. Almost all of the japanning remains. Some patina on the bare metal surfaces, G+ ........ $235.00
   Picture

2. SARGENT NO. 710, AUTOSET SMOOTH PLANE, (No. 4 size) Pat.Jan.12.(19)15 patent date cast in the bed. 85% japanning. The handle has a good tip, but has a tight glued crack. Some patina on the bare metal surfaces, G+ ........ Sold $135.00
   Picture

3. In the box MILLERS FALLS NO. 9, SMOOTH PLANE, (No. 4 size) Has had very little use. 99% of the red and black enamel remains. Crisp rosewood handle and tall knob. Some slight patina on the bare metal surfaces from age. The box has a bit of stain and wear, Fine ........ Sold $115.00
   Picture

4. SARGENT NO. 418, FORE PLANE, (No. 6 size) Sargent VBM (Very Best Made) logo on the cap and cutter with 1 3/4 inches of meat left, date this to ca. 1920. This is a nice example of the No. 6-size jointer plane made by a respectable company. There is a chip on the side of the mahogany handle. There is a short beaded knob. 92% of the japanning remains. The cutter needs sharpening. Has been lightly cleaned. A very good user, G+ ........ $65.00
   Picture

5. UNION MFG. CO. NO. X-8, JOINTER PLANE, No. 8 size. Pat. 12.8.(19)03 cast in the bed. The X-series planes have an adjustment lever that locks between two brass nuts. Thick-tapered cutter has 1 1/2 inches of meat left. 96% japanning is a little grimy in places. Mahogany handle and low knob have some tool-box dings. There's some patina on the bare metal surfaces. A very nice example of a hard-to-find plane, G+++ ........ $295.00
   Picture

6. Boxed CRAFTSMAN (Stanley No. 78) DUPLEX RABBIT & FILLETSTER PLANE, Made by Sargent. Complete with fence, depth stop and screws. Has seen little use, has 98% of the original japanning. Some light patina on the bare metal. In the original box with clear tape over the label (Good), which protected it from damage, Fine ........ $80.00
   Picture

7. CRAFTSMAN (Stanley No. 78) DUPLEX RABBIT & FILLETSTER PLANE, Made by Millers Falls. Complete with fence, depth stop and screws. Has seen little use, has 95% of the original japanning. Some light patina on the bare metal. A good user, Fine ........ $75.00
   Picture

8. FULTON NO. 409, SMOOTH PLANE, (No. 4) Made by Sargent. Raised area behind the knob has Fulton cast in it. 97% japanning, handle has a tight crack but most all of the finish, G+ ... $55.00
   Picture

1. Boxed STANLEY NO. 9 1/4, BLOCK PLANE, Adjustable cutter. 6 inches long. Stanley notched-rectangle mark on the cutter. 99% japanning. Some minor patina on the bare metal surfaces from age. The box has some tape on it, Fine+, ........... $45.00
   Picture

2. STANLEY NO. 9 1/4, BLOCK PLANE, 6 inches long. Adjustable cutter. Stanley notched-rectangle mark on the cutter. 98% japanning - the cap has been repainted. Some patina and light rust on the bare metal surfaces, G+ A very nice plane, Fine ........... $30.00
   Picture

3. Boxed STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. Adjustable cutter. Stanley notched-rectangle mark on the full-length cutter. This is a very nice plane. Japanning is virtually all there. Light owner's initials on the side. Has been lightly cleaned. The box is very nice with a bit of dirt, Fine+ ..........Sold $110.00
   Picture

4. STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. Adjustable cutter. Notched-rectangle logo on the cutter. This is a very nice plane. Japanning is 95%. Very crisp with some minor patina on the bare metal surfaces, G++ .......... $80.00
   Picture

5. STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. Adjustable cutter. Sweetheart logo on the full-length cutter, dates this one to the 1930's. This is a very nice plane. Japanning is 95%, Fine .......... Sold $90.00
   Picture

6. STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. Adjustable cutter. Stanley notched-rectangle mark on the cutter. A later one from the 1960's. 99% blue enamel, Fine .......... $60.00
   Picture

7. STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. A rare type. This is the first model of the No. 9 1/2 that had the new style body with the hump in the center, but still has the older style lever cap with the long lever coming out under the back. J trademark on the cutter, 85% japanning, G+ .......... $75.00
   Picture

   No. 9 1/2 Note: The Stanley No. 16 is the same as the No. 9 1/2 except the cap is nickel plated. The No. 18 is the same except for a knuckle-joint cap, which is very nice for using. The Millers Falls No. 16 is virtually the same as the Stanley 9 1/2.

8. STANLEY NO. 15, 7 INCH BLOCK PLANE, with adjustable throat. Same as the No. 9 1/2, but an inch longer. Notched-rectangle logo on the cutter. 97% japanning, Fine ........... Sold $80.00
   Picture

9. STANLEY NO. 15, 7 INCH EXCELSIOR BLOCK PLANE, with adjustable throat, ca. 1885, It has the early Excelsior-style body with the hump towards the rear, the cap with the lever underneath, and Bailey Patent cutter. 85% japanning. Some staining and a little pitting on the sides, but, overall a good, usable example of an early block plane. Can use some cleaning, G+ ........... Sold $85.00
   Picture

10. MILLERS FALLS NO. 17 BLOCK PLANE, 7 inches long. Exactly the same as the Stanley No. 15. Adjustable throat. 97% japanning. Has been lightly cleaned, Fine ..........Sold $70.00
    Picture

11. STANLEY NO. 16 BLOCK PLANE, Exactly the same as the No. 9 1/2 except it has nickel plated trimmings. Adjustable throat. A nice early one. T trademark on the cutter, 1897 patent date on the cap. Almost all of the japanning and 85% of the nickel plating remains (the picture shows the bad side), G+ .......... Sold $60.00
    Picture

12. STANLEY NO. 18, BLOCK PLANE, with adjustable throat. Nickeled trimmings. J trademark on the cutter dates this one to around 1900. Has 95% of the japanning, and 90% of the nickel plating remaining on the cap. Some minor dings and light pitting on the sole won't affect use, but could be lapped out. A good plane for use - a lot of woodworkers like the cap for blade-holding ability and comfort, G+ ............Sold $60.00
    Picture

13. Boxed STANLEY NO. 60 1/2, LOW ANGLE BLOCK PLANE, with adjustable throat. A very nice example from the 1950s. Made in USA logo on the full-length cutter. This is the smaller, 6 inch block plane. I find this plane to be very useful because of its small size and low angle. No chips or cracks in the throat. It has 99+% of its japanning. Has been lightly cleaned. In the original box, which is pretty nice, with one separated corner, Fine ............ Sold $120.00
    Picture

14. STANLEY NO. 60 1/2, LOW ANGLE BLOCK PLANE, with adjustable throat and adjustable cutter. Notched-rectangle logo on the cutter with good life left. This is the smaller, 6 inch block plane. I find this plane to be very useful because of its small size and low angle. No chips or cracks in the throat. It has 95% of its japanning. Some minor scratching on the bottom, G++ ............ $75.00
    Picture

15. STANLEY NO. 65, LOW ANGLE BLOCK PLANE, with adjustable throat, knuckle-joint cap. Notched-rectangle logo on the full-length cutter. 98% shiny japanning. This is probably a WW II model, the nickel plating is dull and the knob is not plated. Has been lightly cleaned. A very nice plane, Fine ....... $110.00
    Picture

16. CRAFTSMAN NO. 3732, (Made by STANLEY, it's their No. 65) LOW ANGLE BLOCK PLANE, with adjustable throat, knuckle-joint cap. 95% japanning, nickel plating on the cap is a bit dull. Crisp plane with no chips or cracks in the throat. Some patina on the bare metal surfaces, G++ ....... $90.00
    Picture

17. MILLERS FALLS NO. 57, LOW ANGLE BLOCK PLANE, This one is the same size as the STANLEY No. 65, but it has the regular block plane cap. Most of the japanning remains, except some is missing on the hood of the cap, which is common. The bare metal surfaces have some patina. This is a very good user, G+ ............... Sold $70.00
    Picture

18. CRAFTSMAN 3732 (No. 65) LOW ANGLE BLOCK PLANE. This one is the Sargent equivalent of the STANLEY NO. 65, and sold by Craftsman. 98% grey enamel, most of the nickel plating. A good user, G+ ............ $45.00
    Picture

19. STANLEY NO. 75, BULL NOSE RABBET PLANE, Sweetheart logo on the cutter. Adjustable throat. 90% japanning. W or M owner's mark on the heel of the plane, G+ ............ $30.00
    Picture

20. STANLEY NO. 100 1/2, TAILED HANDLE BLOCK PLANE, 3 1/2 inch sole. Notched rectangle logo on the cutter. The bottom is curved in both directions. Used by model and patternmakers and musical instrument and furniture makers for cleaning out surfaces having a curved radius. Also good for hogging out areas for clearance. Has had little use. 98% japanning. Some light patina on the sole, Fine ........... $135.00
    Picture

21. STANLEY NO. 101, BLOCK PLANE, Notched-rectangle logo on the cutter. 99% of the black japanning remain. There are a couple of scuffs on the red cap, Fine ........... $35.00
    Picture

22. STANLEY NO. 102, BLOCK PLANE, Early arched J trademark on the cutter. 80% of the japanning remains, G ........... $30.00
    Picture

23. Boxed STANLEY NO. 102, BLOCK PLANE, Notched-rectangle logo on the cutter. 99% of the japanning remains, with some minor rust spots on the bare metal surfaces from storage. A very nice little plane. The box has some edge wear, Fine ........... $50.00
    Picture

24. FULTON NO. 102, BLOCK PLANE, Looks like it was made by Sargent. 95% of the japanning remains. Could use a bit of cleaning, G++ ........... $30.00
    Picture

25. MILLERS FALLS NO. 5, BLOCK PLANE, Same as the Stanley No. 102, but made by Millers Falls. 98% japanning. Shiny-nice, Fine ........... Sold $40.00
    Picture

26. STANLEY NO. 103, BLOCK PLANE, Same as the No. 102, except there is a cutter adjuster. Early type with the large arched J trademark on the cutter. 70% of the japanning remains, G+ ........... $40.00
    Picture

27. Boxed STANLEY NO. 110, BLOCK PLANE, In it's original box. Stanley notched rectangle logo on the cutter. 99% japanning and enamel. Some light patina on the bare metal surfaces. In a very nice original box , Fine ........... $30.00
    Picture

28. STANLEY NO. 118, BLOCK PLANE, A low-angle block plane. Has a steel body that doesn't break like cast iron. These were originally designed for shop class, but they are very handy for use. It has almost all of the black enamel on the body, but is missing some from the top of the cap, G++ ........... $40.00
    Picture

29. STANLEY NO. 140, RABBET BLOCK PLANE, Sweetheart logo on the cutter. Has a skewed blade, which will make fine shavings, and a removable side plate to make it into a rabbet plane. 95% japanning and 95% nickel plating on the cap, Fine .................. $185.00
    Picture

30. STANLEY NO. 203, BLOCK PLANE. Notched-rectangle logo on the full-length cutter. 98% of the japanning remains. Crisp rosewood knob. 5 1/2 inches long. This is a perfect plane for small, general purpose work, or for kids to use. There is are some spots of very light stain on the top of the cutter, but this is very nice, Fine+ ........... $120.00
    Picture

31. MILLERS FALLS NO. 206, STEEL BLOCK PLANE, same as the Stanley 118. A low-angle block plane. Made to be unbreakable, it's actually a light, comfortable plane to use. 98% of the black japanning and nickel plating remains, G++ ........ Sold $55.00
    Picture

32. STANLEY NO. 220, BLOCK PLANE, An early one with the V trademark on the cutter, ca. 1910. Rosewood knob.
    A general purpose plane that is the choice for many carpenters for trimming and smoothing.
    95% japanning remains. Some patina on the bare metal surfaces. It's in superior shape for its age, G++ ........... Sold $40.00
    Picture

1. STANLEY NO. 12, VENEER SCRAPER, Used for scraping fine hardwoods, veneer, and fancy grained woods. 96% japanning. Cocobolo handle. The cutter has the STANLEY mark and is nearly full-length. Some light patina on the bare metal surfaces. Owner's initials on the bottom of the handle and the blade, G++ .............. Sold $125.00
   Picture

2. Boxed STANLEY NO. 80, CABINET SCRAPER, V trademark on the cutter and the crossbar, which also has the 6.2.(19)14 and 6.23.(19)14 patent dates. 97% of the japanning remains. In the original S R & L box with instructions on how to sharpen the cutter. Fine ........ $105.00
   Picture

3. STANLEY NO. 80, CABINET SCRAPER, Notched-rectangle logo on the cutter and Sweetheart logo on the crossbar. 98% of the japanning remains, Fine ........ $55.00
   Picture

4. STANLEY NO. 80M, CABINET SCRAPER, The M stands for malleable iron, which makes this one much less breakable than the cast iron model. Made in USA logo on the crossbar and the cutter. Later model with blue enamel. Looks like it hasn't been used, Fine ........ $55.00
   Picture

5. STANLEY NO. 81, CABINET SCRAPER, Has most of the nickel plating, with some dirt and light rust. Good depth on the rosewood sole. The cutter has a Sweetheart mark, but looks like it was cut down from a No. 12 scraper. A good user, G+ ........ $90.00
   Picture

   STANLEY NO. 82, CABINET SCRAPER, This one has the flat cutter with the Sweetheart logo. 96% of the japanning remains, Fine ........ $50.00
   Picture

6. STANLEY NO. 112, CABINET SCRAPER PLANE, STANLEY block-letter logo on the cutter with almost full length. 96% japanning. Has a perfect rosewood handle and front knob with a few minor tool-box dings. The plane is very crisp, Fine .............. $325.00
   Picture

7. STANLEY NO. 112, CABINET SCRAPER PLANE, A good user. STANLEY block-letter logo on the cutter with some light pitting. The rosewood handle and front knob have tool-box dings. 75% japanning, but looks a lot better. Some minor pitting on the sole won't affect use, and could be lapped out. I will include a replacement cutter for use. Could use a bit of cleaning, G+ ......... $200.00
   Picture

8. STANLEY NO. 292, HOOKED SCRAPER, Almost all of the original finishes remain, Fine ........ Sold $35.00
   Picture

9. STARRETT SCRAPER HANDLE, Holds hand-scraper blades for cabinet scraping, floor scraping, etc. Universal-joint blade adjustment, G++ ............. $30.00
   Picture

(Note: For information about combination planes, see My Features Section)

(Another Note: Sharpen the cutters on the flat side and maybe hone the bevel. that way the profile doesn't get deformed.

1. Boxed STANLEY NO. 45 COMBINATION PLANE, In the orange steel box with hinged lid. This is the only one that can be displayed as assembled in the box. Has seen little use. Sweetheart logo on the skate. 7 Planes in one ... 1-Beading and Center Beading, 2-Plow, 3-Dado, 4-Rabbet, 5-Match Plane, 6-Sash Plane, 7-Slitting Plane. This one is complete with the long and short rods, 4 depth stops, cam, spare spurs, screwdriver, and 23 cutters. The cutters are shiny-nice with just a bit of stain from storage. 98% of the nickel plating remains - there is some stain on the long rods. In the original box that is very crisp with only one area of rust on the side of the front top, with original instructions, Fine ......... $535.00
   Picture-Plane

   Picture - Box

   Picture - cutters

   Picture - In box

2. Boxed STANLEY NO. 45 COMBINATION PLANE Notched rectangle logo on the skate. 7 Planes in one ... 1-Beading and Center Beading, 2-Plow, 3-Dado, 4-Rabbet, 5-Match Plane, 6-Sash Plane, 7-Slitting Plane. This one is complete with the long and short rods, 4 depth stops, cam, and Sweetheart two cutter boxes (no labels) with 23 cutters. They have been lightly used, but they have some stain and very light pitting that will disappear when they are lapped while sharpening. Almost all of the original nickel-plating remains. In the original box, which is rough. Includes the original instructions, G++ ......... $275.00
   Picture-Plane

   Picture - Box

   Picture - cutters

3. STANLEY NO. 45 COMBINATION PLANE, Notched rectangle logo on the skate... complete with cam, all four depth stops, long and short rods and 23 cutters in the wooden box bottom. The cutters have some minor stain and a few rust spots, but lapping for use will take care of that. 85% nickel plating. I'll include a copy of The Stanley Company's Combination Planes book, that has the instructions for the No. 45. This one is a very good user at a reasonable price, G+ ......... $220.00
   Picture-Plane

   Picture - Cutters

4. STANLEY NO. 5 NOSING ATTACHMENT - For use on the No. 45 plane. Cuts a 1 1/4 half-round for use on 5-quarter stock, for stair treads, etc. 99% nickel plating, Fine+ ......... Sold $145.00
   Picture

   STANLEY NO. 8 HOLLOW & ROUND PAIR- For use on the No. 45 plane. 99% nickel plating, Fine++ ......... $150.00
   Picture

5. STANLEY NO. 46, SKEWED COMBINATION PLANE, It's a later nickel plated one with the rosewood fence A great combination plane. Complete with spurs, both depth stops, and a complete set of 10 cutters, and the slitter. The skewed cutters work great, especially for dados. 80% of the nickel plating remains, but it's a bit dusty and dirty. The cutters need a bit of lapping and sharpening, and they will be ready to go. A very nice user, G+ ......... $395.00
   Picture

6. Boxed STANLEY NO. 50 LIGHT COMBINATION PLANE, Complete with 2 depth stops, the usually-missing cutter holding screw and shaving deflector, and 17 cutters (9 plow, 6 beading and 1 match) that have had very little use (only two have been sharpened) - they have some dirt and original cosmoline on them, in their blue-labeled Stanley box. The plane has about 99% of its nickel plating. The rosewood handle has some light scuffs to the finish. In the original box, which it a little rough, Fine++ ........ $265.00
   Picture

7. STANLEY NO. 55 COMBINATION PLANE. Sweetheart logo on the skate and cutter boxes. With this plane you can make an almost unlimited variety of moldings. Complete with long and short rods, 3 depth stops, auxiliary center bottom, cam, and a total of 55 cutters in their original boxes.
   The cutters are in nice, crisp condition. There are a few spots of stain from storage for over 70 years. Honing them on the flat side while sharpening will clean that up.
   The plane was used very little... 98% of the nickel plating remains, with minor dirt.
   Nice dark rosewood handles and fences.
   The box was owner-made with Stanley labels attached. The instructions for the No. 55 may be a reprint, Fine .......... Sold $675.00

   Picture - Plane

   Picture - Cutters

   Picture - Cutter Boxes

   Picture - Box

8. STANLEY NO. 55 PLANE CUTTER SET, A complete set of 54 cutters (without slitter, which came on the plane). These are in extremely nice condition. The box top has some tape around the edges.
   Note for No. 45 users: 22 of these cutters are for the No. 45 plane, and the three reeding and four fluting cutters are special cutters for the No. 45. I would assume that the eight hollow and round cutters will work as well on the No. 45 as the No. 55, even though Stanley made attachments for the No. 45, Fine+ ........ Sold $295.00
   Picture - cutters

   Picture - Box

9. STANLEY NO. 55 COMBINATION PLANE, CENTER AUXILIARY BOTTOM ONLY, Here's a chance to pick up this often-missing but necessary part. It supports the plane body when using the wider molding cutters. Complete with the shoe. 97% of the nickel plating remains, Fine .......... $110.00

   Picture

Back To Tool Index Back to Homepage