EDGE TOOLS FOR SALE This is an index of edge tools for sale. Some of them will have a button to click to see a Picture. ... Instead of having to load each image to continue, just scroll this list and click to see an image. This list has axes and hatchets, drawknives, chisels, adzes, slicks and carving tools.
Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

Cantelo Draw Knife

I have a New Edge Tool Showcase that has thumbnail pictures and descriptions of some interesting edge tools. I also have information of some that have been sold. I am breaking up the Showcase into separate categories to make it easier to use.
Click here to go to the Edge Tool Showcase


Back To Tool Index Back to Homepage

Blade Sharpening [Click To Order]


  1. STANLEY NO. 200 SHARPENING JIG. For chisels and plane irons. It adjusts to the bevel degree you want. 97% nickel plating, G++ ........... $90.00
    Picture

  2. STEARNS NO. 1 CHISEL AND TOOL GRINDER. For chisels and plane irons. It adjusts to the bevel degree you want. The catalog illustration shows it in use on a bigger, slow grinding wheel. It also works on a flat stone. Most of the nickel plating remains, but it is dull, G+ ........... $35.00
    Picture

  3. MILLERS FALLS CHISEL AND TOOL GRINDER. For chisels and plane irons. It adjusts to the bevel degree you want, G+ ........... $20.00
    Picture

Axes and Hatchets [Click To Order]

  1. STANLEY HATCHET 1 1/4 lb. 2 3/4 inch blade, 13 1/2 inches overall, G+ ........... $30.00
    Picture

  2. RED SEAL CLAW HATCHET, 4 inch blade. Bevel on both sides and a claw at the top. Some very minor patina, but it's quite crisp, G++ ........... Sold $40.00
    Picture

  3. STILETTO SHINGLING HATCHET, with gauge block and fat handle. Had a spritz of orange paint. I wiped most of it off, Fine ........... $40.00
    Picture

Drawknives [Click To Order]

  1. CHAMFER GUIDES, Not marked by Mfr.but has a July.19.(18)79 patent date on a screw. They fit on a draw knife to cut chamfers. They are built to cut on a skew, G++ ................ $55.00
    Picture

  2. L & I. J. WHITE, COOPER'S CHAMFER KNIFE. Used to bevel the inside edge of a barrel for the top and bottom to fit. Laminated blade, G+ .................... $65.00
    Picture

  3. A. J. WILKINSON, BOSTON, 6 INCH DRAW KNIFE, with FOLDING MAPLE? HANDLES, Patented July, 16, 1895 stamped on the end of the blade. Needs a bit of sharpening and lapping, G+ ................... $110.00
    Picture

  4. STILLETO, 8 INCH DRAW KNIFE, Ebonized handles. Needs a bit of sharpening, G+ .................... $35.00
    Picture

  5. A. J. WILKINSON, BOSTON, 8 INCH DRAW KNIFE, with FOLDING HANDLES, The handles look like they are fruitwood. Laminated blade. Patented July, 16, 1895 stamped on the end of the blade. Almost all of the nickel plating remains. Needs a bit of sharpening, Fine ................... $110.00
    Picture

  6. A. J. WILKINSON, BOSTON, 8 INCH DRAW KNIFE, with FOLDING HANDLES, Laminated blade. Patented July, 16, 1895 stamped on the end of the blade. Owner's initials. Needs a bit of sharpening and lapping, G++ ................... $85.00
    Picture

    FULTON, 8 INCH DRAW KNIFE. Laminated blade, ebonized handles have an owner's name. Patina on the bare metal. Could use a bit of sharpening and lapping, G+ .................... $30.00
    Picture

  7. OHIO TOOL CO., 8 INCH DRAW KNIFE, FOLDING HANDLES. Laminated blade. Can use some sharpening and lapping. A very nice tool, G+ ............ $75.00
    Picture

  8. KEEN KUTTER, 8 INCH DRAW KNIFE, Ebonized handles have some wear to the finish. Could use a bit of sharpening, G+ ........... $35.00
    Picture

  9. RELIANCE, 9 INCH DRAW KNIFE. Laminated blade. Stained hardwood handles. I think this is an early Greenlee brand, G++ ........... $40.00
    Picture

  10. 9 INCH DRAW KNIFE. Not marked by mfr. Heavy-duty with laminated blade. Tight handles. The top of the blade has been hammered a bit, G++ ........... $45.00
    Picture

  11. PEXTO, 10 INCH DRAW KNIFE, with FOLDING red-stained HANDLES. There is no mfr. mark, but it looks exactly like a Pexto. Laminated blade. There is some minor pitting, but a bit of sharpening and lapping will take care of that, G+ ................. $60.00
    Picture

  12. RUSSELL BROTHERS, NEW YORK, 10 INCH DRAW KNIFE, Laminated blade. Can use a bit of sharpening and lapping, G+ ................. $45.00
    Picture

  13. L & I. J. WHITE, 12 INCH DRAW KNIFE. Great for peeling logs or rounding large work, G+ ............ $55.00
    Picture

Chisels, Gouges and Slicks [Click To Order]

Stanley Chisels
  1. STANLEY EVERLASTING NO. 20, BEVEL-EDGE FIRMER CHISEL SET, A very nice complete set with 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 3/4 and 2 inch chisels. In the original oil-cloth roll with Sweetheart logo.
    They are close to full-length at 10 3/4 to 12 1/2 inch long. They all have the Sweetheart logo, except for the two largest, which have a patent number.
    They could use a bit of sharpening and lapping for use, G++ ....... $1695.00
    Picture

  2. STANLEY EVERLASTING BEVEL-EDGE CHISEL SET, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 3/4 and 2 inch. In an original oil-cloth roll with Sweetheart logo.
    They are 7 3/4 to 10 1/2 inch long. Some of the marks are faint, but I think they are all Sweethearts. Some have been cleaned, some need it.
    There is some pitting that needs some lapping and sharpening, but this is a good user set, G+ ....... $1045.00
    Picture

  3. STANLEY NO. 40 BEVEL-EDGE POCKET CHISEL, 1/4 inch. Black composition everlasting handles with the metal caps on the top. A high-quality chisel in uncleaned original condition with most of the original lacquer on the blade. Overall length is 8 3/4 inches. Could use a bit of sharpening, Fine+ ....... $40.00
    Picture

  4. STANLEY NO. 40 BEVEL-EDGE POCKET CHISEL, 1/2 inch. Black composition everlasting handles with the metal caps on the top. A high-quality chisel in uncleaned original condition with most of the original lacquer on the blade. Overall length is 8 1/2 inches. Could use a bit of sharpening, Fine+ ....... $40.00
    Picture

  5. STANLEY NO. 40 BEVEL-EDGE POCKET CHISEL, 1 inch. Black composition everlasting handles with the metal caps on the top. A high-quality chisel in uncleaned original condition with most of the original lacquer on the blade. Overall length is 8 1/2 inches. A little stain, not pitting, on the top of the blade. Could use a bit of sharpening, Fine+ ....... $40.00
    Picture

  6. STANLEY EVERLASTING NO. 50, 1/4 inch Bevel Edge Butt Chisel. Stanley on the blade and Sweetheart logo with patent dates stamped on the socket. The chisel is 9 inches overall. There is a chip on the edge, so it needs some sharpening, G+ ....... Sold $60.00
    Picture

  7. STANLEY EVERLASTING NO. 50, 1/2 inch Bevel Edge Butt Chisel. Stanley on the blade and Made in USA and a patent date stamped on the socket. The chisel is 7 3/4 inches overall. Needs some sharpening and a light lapping, G+ ....... Sold $45.00
    Picture

  8. Boxed STANLEY NO. 60 2 INCH CHISEL, an early one that is marked Stanley, No. 60 and Made in USA on the socket, not the handle. Stanloid handles. They have the metal caps on the handles to absorb hammering. These are high-quality chisels. When these came out, they were more expensive than the Everlasting chisels. The box has a few minor tears, but is nice. Has had little use. Very minor patina on the blade, Fine .......... Sold $70.00
    Picture

  9. STANLEY NO. 161, 1 1/2 inch bevel edge butt chisel. A tanged chisel with a handle with a brass ferrule. This is the first one of these I have had. Marked Stanley on the shank, and with the number on the ferrule. Partial decal on the handle, G++ ....... $65.00
    Picture

  10. STANLEY NO. 720, 1/4 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 12 inches overall. Nice steel, some wear to the finish on the handle. Could use some sharpening. Very crisp and nice, G++ ....... $50.00
    Picture

  11. STANLEY NO. 720, 3/8 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 blade, 11 3/4 inches overall. Pretty nice, G++ ....... Sold $60.00
    Picture

  12. STANLEY NO. 720, 1/2 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 11 7/8 inches overall length. Needs a bit of sharpening and lapping, Fine ....... Sold $65.00
    Picture

  13. STANLEY NO. 720, 3/4 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 5 1/4 inch blade, 12 inches overall. Nice handle. Needs a bit of sharpening and lapping, Fine ....... $65.00
    Picture

  14. STANLEY NO. 720, 3/4 inch bevel edge cabinet chisel. Stanley on the blade, and Made in USA mark on the socket. 4 1/4 inch blade 11 1/4 inches overall. Some stain on the blade and scuffing on the finish on the handle. Can use some sharpening, G+ ....... $45.00
    Picture

  15. STANLEY NO. 720, 1 inch bevel edge firmer chisel. Stanley, No. 720 and Made in USA mark on the socket. 4 1/4 inch blade, 11 1/4 inches overall. The leather on the handle is worn and there are a few dings to the finish. Needs some sharpening, G+ ....... $50.00
    Picture

  16. STANLEY NO. 720, 1 inch bevel edge firmer chisel. Stanley, and Made in USA mark on the socket. 12 inches overall. Brown handle may mean this is a 1720. Some pitting on the top. Could use some sharpening and lapping, G+ ........... $25.00
    Picture

  17. STANLEY NO. 720, 1 1/4 inch bevel edge firmer chisel. Stanley, and Made in USA mark on the socket. 6 inch blade, 13 inches overall. Great steel, some minor scuffing on the handle, Fine ....... $85.00
    Picture

  18. STANLEY NO. 720, 1 1/2 inch bevel edge firmer chisel. Stanley, and Made in USA mark on the socket. 13 1/2 inches overall. Could use some sharpening and lapping. Very crisp and nice with some minor stain, G+ ....... $60.00
    Picture

  19. STANLEY NO. 720, 2 inch bevel edge firmer chisel. Stanley, and Made in USA mark on the socket. 13 1/8 inches overall. Marked Stanley, No. 720 and Made in USA on the socket. The handle was split and glued. There is some pitting, on the back, and on the flat side of the blade. It is minor for the first inch, and should lap out easily, G+ ....... $50.00
    Picture

  20. STANLEY NO. 740, 1/4 inch bevel edge cabinet chisel. Stanley on the blade, and Made in USA mark on the socket. 4 inch blade 11 1/4 inches overall. Some stain on the blade and scuffing on the finish on the handle. Can use some sharpening, G+ ....... $45.00
    Picture

  21. STANLEY NO. 750, 1/4 inch bevel edge butt chisel. 9 1/4 inches overall. Marked Stanley and Made in USA on the socket. Could use some some sharpening and a light cleaning, G+ ....... $45.00
    Picture

  22. STANLEY NO. 750, 3/8 inch bevel edge butt chisel. Marked Stanley, D and Made in USA on the socket. 3 1/2 inch blade, 9 1/4 inches overall. Small chip out of the edge. There is some pitting on the back about 3/4 inch fron the edge. Nice handle, G++ ....... Sold $30.00
    Picture

  23. Boxed STANLEY NO. 750, 1/2 inch bevel edge butt chisel. 9 1/4 inches overall length. Marked Stanley, No. 750, and Made in USA on the socket. The chisel has had slight use. The box is pretty nice with some stain on the top, Fine ....... $115.00
    Picture

  24. STANLEY NO. 750, 1/2 inch bevel edge butt chisel. Marked Stanley and Made in USA on the socket. 9 1/4 inches overall. Crisp handle, some light patina on the blade. Could use some some sharpening, G++ .......Sold $50.00
    Picture

  25. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. 8 1/2 inches overall. Marked Stanley and Made in USA on the socket. Can use some sharpening and lapping, G+ .......Sold $30.00
    Picture

  26. STANLEY NO. 750, 3/4 inch bevel edge butt chisel. Marked Stanley, D and Made in USA on the socket. 3 1/4 inch blade, 9 inches overall. Some patina on the blade. Could use some some sharpening, G+ ....... $30.00
    Picture

  27. STANLEY NO. 750, 1 inch bevel edge butt chisel. 3 1/4 inch blade, 9 1/4 inches overall. Marked Stanley, No. 750, and Made in USA on the socket. The leather top of the handle has been trimmed. Could use some some sharpening, G++ ....... $45.00
    Picture

  28. STANLEY NO. 750, 1 inch bevel edge butt chisel. Marked Stanley and Made in USA on the socket. 3 1/4 inch blade, 9 1/4 inches overall. The leather top of the handle has been trimmed. Patina but no pitting on the back, G+ ....... $40.00
    Picture

  29. STANLEY NO. H1251, 1 1/2 inch bevel edge butt chisel. Marked Handyman (I haven't seen that before), and Stanley, No. H1251 and Made in USA on the socket. 9 1/2 inches overall. The leather top of the handle has been trimmed. Needs some sharpening and lapping, G++ ....... $45.00
    Picture

Swedish Chisels
  1. SET OF 5 SWEDISH TANGED BUTT CHISELS, Made by Torshalla Smide. The sizes are roughly 1/8, 1/4, 3/8, 3/4 and 1 inch, G++ ....... $90.00
    Picture

Other Chisels [Click To Order]
  1. SAMSON NO. 301 SOCKET FIRMER CHISEL SET, A complete set of five (as stated on the label) chisels made by Union Hardware Co. 1/4, 1/2, 3/4, 1, and 1 1/4 inch chisels in their original box with label, which is missing the lid. They need a bit of cleaning, sharpening and lapping. A nice little set, G+ ....... $215.00
    Picture

  2. LAKESIDE, 3/4 CORNER CHISEL. 8 inch blade, 15 inches overall. Can use some sharpening, G+ ....... $60.00
    Picture

  3. OHIO TOOL CO., 3/4 CORNER CHISEL. 8 inch blade, 16 1/2 inches overall. Can use some sharpening, G+ ....... $60.00
    Picture

  4. WHITHERBY, 1/8 INCH SOCKET FIRMER CHISEL. 6inch blade, 12 1/2 inches overall. Can use some sharpening, G++ ....... $40.00
    Picture

  5. UNMARKED, 1/8 INCH SOCKET CABINET CHISEL. 4 1/4 inch blade length, overall length is 11 inches, G+ ....... $45.00
    Picture

  6. BUCK BROS., 1/4 INCH CRANK-NECK CHISEL. Bevel edge. Blade is 6 inches. Can use some sharpening and lapping, G+ ....... $55.00
    Picture

  7. BUCK BROTHERS, 1/4 INCH SOCKET FIRMER CHISEL. Bevel edge. Blade is 5 1/2 inches, 12 inches overall. Can use some sharpening and lapping, G+ ....... $40.00
    Picture

  8. KEEN KUTTER, 1/4 INCH SOCKET BUTT CHISEL. Blade is 3 1/2 inches, overall length is 9 1/2 inches. The handle looks like a replacement. Can use some sharpening, G+ .......$20.00
    Picture

  9. ZENITH, 1/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 12 1/2 inches. Can use some sharpening, G++ ....... $40.00
    Picture

  10. SHAPLEIGH HARDWARE, DIAMOND EDGE, 3/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL, G+ ....... $30.00
    Picture

  11. ZENITH, 3/8 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches . The leather is chewed. Can use some sharpening, G+ ....... $22.00
    Picture

  12. UNION HARDWARE, 1/2 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. The blade is 8 inches, 14 3/4 inches overall length. Can use some sharpening, G+ ....... $45.00
    Picture

  13. GREENLEE, 1/2 INCH SOCKET FIRMER CHISEL. Blade is 4 1/2 inches, overall length is 11 1/2 inches . Can use some sharpening, G+ ....... $25.00
    Picture

  14. WINSTEAD EDGE TOOL WORKS, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. 12 1/2 inches overall length. Can use some sharpening, G++ ....... $30.00
    Picture

  15. DOUGLASS MFG. CO., 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 5 1/2 inches, overall length is 13 1/2 inches. It could use a bit of sharpening and lapping, G+ ....... $25.00
    Picture

  16. SAMSON, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches . Can use some sharpening, G+ ....... $25.00
    Picture

  17. EVERKEEN, 1/2 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 1/4 inches, overall length is 12 1/2 inches. Ebonized handle. Can use some sharpening and lapping, G+ ....... $30.00
    Picture

  18. L & I. J. WHITE, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. A very high-quality American edge tool maker. Blade is 6 inches, overall length is 13 inches. A couple of spots of rust, but a very nice blade. The iron-ring handle looks like a replacement. Can use some sharpening, Fine ....... $50.00
    Picture

  19. GREENLEE, 3/4 INCH BEVEL-EDGE SOCKET FIRMER CHISEL. Blade is 6 inches, overall length is 12 1/2 inches . Can use some sharpening, Fine ....... Sold $35.00
    Picture

    D. R. BARTON, 1 INCH CRANK-NECK CHISEL. Blade length is 6 1/2 inches. Needs some sharpening, G++ ....... $65.00
    Picture

  20. JAMES SWAN, 1 INCH SOCKET FIRMER CHISEL, Blade is 6 1/2 inches, 13 1/2 inches overall. Can use some sharpening and lapping, G+ ....... $45.00
    Picture

  21. UNION, 1 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. Blade is 8 inches, overall length is 15 inches . Minor pitting can use some sharpening and lapping, G+ ....... $40.00
    Picture

  22. ZENITH, 1 INCH BEVEL-EDGED SOCKET FIRMER CHISEL. Blade is 6 1/2 inches, overall length is 14 inches. Can use some sharpening, G++ ....... $45.00
    Picture

  23. BUCK BROS., 1 1/4 INCH TANGED PARING CHISEL. Blade is 7 1/4 inches, overall length is 15 1/2 inches., G+++ ....... $65.00
    Picture

  24. OUR VERY BEST, 1 1/2 INCH SOCKET FIRMER CHISEL. Bevel edge. Blade is 5 3/4 inches, overall length is 13 1/2 inches. Some minor pitting, the hab ndle is a replacement. Can use some sharpening, G ....... $25.00.
    Picture

  25. UNION, 1 1/2 INCH MILLWRIGHT'S SOCKET FIRMER CHISEL. Blade is 8 inches, overall length is 16 1/2 inches. Some light patina, but no pitting. Looks like a new handle. Can use some sharpening, G++ ....... $50.00
    Picture

  26. OHIO TOOL CO., CAST STEEL, 2 INCH SOCKET FIRMER CHISEL. A very heavy chisel with a small bevel-edge. No handle. Can use some cleaning and sharpening. G ....... $25.00
    Picture

Mortise Chisels [Click To Order]
  1. GREENLEE, 1/4 INCH SOCKET MORTISE CHISEL. 7 inch blade, 14 overall length. The handle is missing the iron ring. Needs some lapping and sharpening, G+ ....... $30.00
    Picture

  2. D. R. BARTON, 5/16 INCH SOCKET MORTISE CHISEL. A nice, early, mortise chisel. 6 inch blade, 12 1/4 inches overall length. The handle looks like a replacement. Needs a bit of sharpening and lapping, G+ ....... $50.00
    Picture

  3. WARD & PAYNE 1/2 inch MORTISE CHISEL, English tanged mortise chisel. A renowned English edge-tool maker, ca. 1860-1900. Blade is 7 1/2 inches, 14 inches overall length. Shallow check at the top of the handle, G+ ....... Sold $40.00
    Picture

Gouges [Click To Order]

  1. ZENITH, 1/4 inch socket firmer gouge. 6 inch blade, 13 inches overall. Rose City Wood Carvers is written in the channel, G++ ....... $35.00
    Picture

  2. KEEN KUTTER, 1/4 inch socket firmer gouge. 5 3/4 inch blade, 11 1/2 inches overall, G++ ....... $25.00
    Picture

  3. KEEN KUTTER, 1/2 inch socket firmer gouge. 5 1/2 inch blade, 12 inches overall, G++ ....... $30.00
    Picture

  4. ZENITH, 1/2 inch socket firmer gouge. 6 inch blade, 13 inches overall. Rose City Wood Carvers is written in the channel, G++ ....... $35.00
    Picture

  5. UNION HARDWARE, 1/2 INCH SOCKET GOUGE, Medium sweep. 6 1/4 inch blade, 13 1/4 inches overall. Very crisp, Fine ....... $45.00
    Picture

  6. JAMES SWAN, 5/8 inch socket gouge. 6 1/4 inch blade, 13 1/4 inches overall. Needs a bit of sharpening, G++ ....... $45.00
    Picture

  7. DIAMOND EDGE, 1 INCH SOCKET FIRMER GOUGE, Incannel. 5 1/2 inch blade, 13 inches overall. Very crisp and shiny. A spot of very light pitting about 3/4 inch up the back. Needs a bit of sharpening, Fine ....... $45.00
    Picture

  8. BUCK BROS, 1 inch INCANNEL SOCKET FIRMER GOUGE. 6 inch blade, 14 inches overall. Shiny-nice with some very minor stain. Needs some sharpening, Fine ....... $50.00
    Picture

Adzes [Click To Order]

  1. L & I. J. WHITE LIPPED ADZE, 5 1/2 inch wide laminated blade. The poll is mashed a bit on the tip. I will include a new-old-stock handle that will need some fitting. Needs some sharpening, G+ ....... Sold $165.00
    Picture

  2. TRUE TEMPER POLLED CARPENTER'S ADZE, The blade is4 inches wide. 30 inch handle. Very nice user. Needs some sharpening, G+ ....... $75.00
    Picture

  3. VANSVILLE TOOL WORKS, POLLED CARPENTER'S ADZE, 4 inches wide, 11 1/2 inches overall length. Needs some sharpening and lapping. Nice handle. This is a great user, G+....... $75.00
    Picture


Slicks [Click To Order]

  1. JAS SWAN CO, 3 INCH SLICK, This one is really, really nice. Like new. No Pitting. 9 inch blade, 27 inches overall. It needs a minor sharpening and lapping. You're going to love it, Fine+ .......... $295.00
    Picture

  2. D. R. BARTON, 3 1/2 INCH SLICK, 8 1/2 inch blade, 31 inches overall. It is in very nice condition, but could use a little sharpening and lapping because there are a couple of spots of very light pitting. The handle is a new replacement made from canary wood, G+ .......... $175.00
    Picture

    Blade Top Picture

  3. 2 1/2 INCH SLICK, A rare size. No maker's mark. Blade is 9 3/4 inches long. It's in crisp condition, but the top of the bevel has been roughly ground and there is some light etching on the bottom that needs a bit of lapping. The handle is a replacement, and it needs a bit of fitting, G+ .......... $140.00
    Picture

Carving Tools [Click To Order]

Addis Carving Tools [Click To Order]

  1. J. B. ADDIS & SONS, NO. 1, 5/8 inch chisel. Nice beech handle. Needs some sharpening, G+ ........ Sold $22.00
    Picture

  2. S. J. ADDIS, NO. 2, 1/2 inch skew. Nice beech handle. Needs some sharpening, G+ ........ Sold $25.00
    Picture

  3. J. B. ADDIS, NO. 4, 1/2 inch shallow sweep gouge Nice beech handle. Some pitting 3/8 inch up on the blade. Needs some sharpening, G+ ........ $20.00
    Picture

  4. S. J.ADDIS, NO. 5, 1/4 inch shallow sweep gouge. Nice beech handle. Needs some sharpening, G++ ........ $30.00
    Picture

  5. S. J.ADDIS, NO. 5, 1/4 inch shallow sweep gouge. Nice beech handle. Needs some sharpening and lapping, G++ ........ $30.00
    Picture

  6. J. B. ADDIS & SONS, NO. 7, 3/8 inch gouge. Lignum? handle. Needs some lapping and sharpening, G+ ........ $35.00
    Picture

  7. S. J. ADDIS & SONS, NO. 11, 1/8 inch deep sweep gouge. Mahogany handle. Needs some sharpening, G+ ........ $30.00
    Picture

  8. J. B. ADDIS & SONS, NO. 11, 3/16 inch deep sweep gouge. Beech? handle. Needs some sharpening, G++ ........ $32.00
    Picture

  9. J. B. ADDIS, NO. 11, 1/8 inch deep sweep gouge. No rust, small split in the handle, G++ ........ $32.00
    Picture

  10. S. J. ADDIS & SONS, NO. 21, 1/16 inch front-bent chisel. Boxwood handle, Fine ........ $30.00
    Picture

  11. S. J. ADDIS & SONS, NO. 21, 1/2 inch front-bent chisel. Needs some sharpening, G++ ........ $35.00
    Picture

  12. S. J. ADDIS & SONS, NO. 23, 3/8 inch front-bent skew chisel. Needs some sharpening, G++ ........ $35.00
    Picture

  13. S. J.ADDIS, Cast Steel, NO. 25, 3/4 inch (spoon) gouge, G++ ........ $50.00
    Picture

  14. S. J.ADDIS, NO. 45, 3/8 inch parting tool. Needs some sharpening, G+ ........ $30.00
    Picture



Buck Brothers [Click To Order]
These are the older Buck Brothers carving tools that are high-quality carving tools. I would consider Buck Brothers to have been one of the premier edge-tool makers in the United States.
  1. BUCK BROTHERS, No. 2, 1/8" skew chisel, G++ ..... $30.00
    Picture

  2. BUCK BROTHERS, No. 4, 1/8" shallow sweep gouge, G++ ..... $32.00
    Picture

  3. BUCK BROTHERS, No. 6, 1/2 inch medium sweep gouge, G+ ..... Sold $27.00
    Picture

  4. BUCK BROTHERS, No. 8, 1/16" medium sweep gouge, G++ ..... $32.00
    Picture

  5. BUCK BROTHERS, No. 8 Gouge (marked 9), 3/8 inch. Octagon handle, G+ ........ $25.00
    Picture

  6. BUCK BROS,CAST STEEL, No. 9 (marked 8) Gouge, 9/16 inch. Larger handle w/ brass ferrule. Couple of 2 inch splits in handle, but it is pretty solid, Steel is Fine ........ $30.00
    Picture

  7. BUCK BROTHERS, No. 11, 1/4" deep sweep gouge, G+ ..... $25.00
    Picture

  8. BUCK BROTHERS, No. 11, 5/16" deep sweep gouge, G++ ..... $32.00
    Picture

  9. BUCK BROTHERS,No. 11 Gouge, 7/16 inch. Looks like a file handle, Steel Fine ........ $30.00
    Picture

  10. BUCK BROTHERS, No. 17, 1/4" medium sweep bent gouge, G++ ..... $34.00
    Picture

  11. BUCK BROTHERS, Cast Steel, No. 13, 1/2" medium sweep bent gouge, thumbnail, G++ ..... $34.00
    Picture

  12. BUCK BROTHERS, No. 40, 3/16" bent parting tool, G++ ..... $35.00
    Picture

  13. BUCK BROTHERS, No. 43, 1/4 inch spoon parting tool. Has a split in the handle, G+ ..... $35.00
    Picture


Miscellaneous Carving Tools [Click To Order]
  1. MILLERS FALLS CARVING TOOL SET, NO. 109. A set of 9 carving tools from the 1930s, with maple handles. Overall length is about 8 inches. 1/4 straight chisel, 1/2 straight chisel, 3/8 bent, 1/4 sweep gouge, 1/4 skew, 1/4 gouge, 7/16 gouge, 1/2 gouge, 1/4 veining tool. The handles have some sun-fading. Mahogany? case, G++ ..... $215.00
    Picture

  2. MILLERS FALLS CARVING TOOL SET, NO. 107. A set of 5 carving tools with maple? handles. 3/8 inch bent straight, 1/4 inch med. sweep gouge, 3/8 inch skew, 3/16 inch deep sweep gouge, 1/8 inch parting tool. 5 inches long. With the box bottom, which has the label, so, I don't know what the cover was. Includes the slip stone. Lightly used, Fine ..... $60.00
    Picture

  3. MILLERS FALLS CARVING TOOL SET. An early set of 6 carving tools from the 1890s, with rosewood handles, and in a chestnut? box with sliding lid. 3/8 straight, 1/4 bent straight, 5/16 med. sweep gouge, 1/4 skew, 1/8 deep sweep gouge, and an 1/8 parting tool. All are 6 inches long. There is some light surface rust in places, from storage that won't affect use, G+ ........ Sold $90.00
    Picture

  4. MILLERS FALLS, 1/8 inch medium sweep gouge. Rosewood handle. Part of their longer set, G+ ..... $20.00
    Picture

  5. MILLERS FALLS, 1/2 inch skew. Rosewood handle. Part of their longer set, G+ ..... $20.00
    Picture

  6. _MARPLES & SONS No. 1 3/16 chisel, G++ ..... $22.00
    Picture

  7. KEEN KUTTER, No. 2, 9/32 inch skew, G++ ..... $35.00
    Picture

  8. C. MAIERS (England), Fishtail gouge, 3/8 inch, No. 3 sweep. Walnut? handle. Needs some sharpening, G++ ..... Sold $30.00
    Picture

  9. HERRING BROTHERS, London, No. 3, 5/8 inch gouge, G+++ ..... Sold $35.00
    Picture

  10. HERRING BROTHERS, London, No. 4, 7/8 inch shallow sweep gouge. Tight split in handle, Fine ..... Sold $45.00
    Picture

  11. SPEAR & JACKSON, 3/8" shallow sweep gouge, G+ ............ $15.00
    Picture

  12. MOULSON BROTHERS, 1/2" shallow sweep gouge, G+ ............ $20.00
    Picture

  13. HERRING BROTHERS, London, No. 7, 1/8 inch gouge. Big 6 inch handle, G++ ..... $35.00
    Picture

  14. HERRING BROTHERS, London, No. 7, 3/16 inch gouge, Thumbnail, has a little bit of light rust, G+ ..... $20.00
    Picture

  15. WARD, CAST STEEL,, No. 7, 3/8 inch gouge, Thumbnail. Nice fruitwood handle, G+ ..... $30.00
    Picture

  16. HERRING BROTHERS, London, No. 8, 1/4 inch gouge, Thumbnail, G+ .....Sold $26.00
    Picture

  17. SPEAR & JACKSON, No. 8, 1/4 inch gouge, thumb nailed. Fancy handle, G+ ............ $25.00
    Picture

  18. HERRING BROTHERS, London, No. 14, 1/2 inch curved gouge, G++ ..... $30.00
    Picture

  19. H. Taylor, No. 14, 7/8 inch bent gouge. Shallow sweep. An earlier one with mahogany handle. Remnants of a straw finish, G++ ..... $50.00
    Picture

  20. I. SORBY, No. 15?, 11/16 inch medium sweep bent gouge with boxwood handle, Fine ..... $45.00
    Picture

  21. H. Taylor, No. 15, 1/2 inch bent gouge. An earlier one with mahogany handle. Straw finish, G+++ ..... $40.00
    Picture

  22. H. Taylor, No. 17, 1 inch bent gouge. Medium sweep. An earlier one with mahogany handle. Remnants of a straw finish, G++ ..... $50.00
    Picture

  23. KEEN KUTTER, No. 20, 3/32 inch curved gouge, G++ ..... $30.00
    Picture

  24. HERRING BROTHERS, London, No. 22, 1/4 inch front bent (spoon) chisel, right corner, Fine ..... $35.00
    Picture

  25. H. Taylor, No. 28, 1/4 inch spoon gouge. An earlier one with mahogany handle. Thumbnail edge, G++ ..... $40.00
    Picture

  26. HERRING BROTHERS, London, No. 31, 3/8 inch spoon gouge. Large 6 inch handle, Fine ..... $45.00
    Picture

  27. H TAYLOR, London, No. 39, 3/8 inch parting tool,G+ ..... $30.00
    Picture

  28. D. R. BARTON, No. 40, 1/2 inch bent parting tool. Needs a bit of sharpening, G++ ..... $45.00
    Picture

  29. FROST, NORWICH, No. 40, 1/4 inch parting tool. Handle cracked G++ ..... $23.00
    Picture


. Back To Tool Index Back to Homepage