MEASURING TOOLS FOR SALE This is a list of measuring tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

This section has Squares, Bevel Squares, Angle Dividers, Marking Gauges, Machinist Tools, Trammels, Rules and Tape Measures
Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

Back To Tool Index Back to Homepage


Squares [CLICK TO ORDER]
  1. L. S. STARRETT NO. 453 DIE-MAKER'S SQUARE. 2 1/2 inch length. Hardened rules. With all four rules. The angle of the rule can be adjusted by the screws on the bottom. Owner's name very lightly on the side, Fine ........ Sold $65.00
    Picture

  2. SAWYER TOOL CO. TRY SQUARE. 13 inch, with 11 1/2 inches after the handle. A small, high-quality American maker who's high-quality products are rare. Graduated in 32nds. Nice and clean, Fine ........ $125.00
    Picture

  3. L. S. STARRETT 12 INCH COMBO SQUARE SET. Crisp, 4R graduated, 12 inch, hardened No. 4 rule graduated in 8ths, 16ths, 32nds and 64ths. Has combo square head with level, center head and protractor head, which has a later smooth finish. The scribe is still there. 95% of the finish remains with a bit of patina, Fine ........ $90.00
    Picture

  4. L. S. STARRETT 12 INCH COMBO SQUARE WITH CENTER-FINDER. Crisp, 12-inch, hardened No. 4 rule graduated in 8ths, 16ths, 32nds and 64ths. Has combo square head with level and scribe, and the center head. Some dirt and a bit of patina, G++ ........ Sold $55.00
    Picture

  5. L. S. STARRETT 12 INCH COMBO SQUARE. 4R 12 inch, hardened rule graduated in 8ths, 16ths, 32nds and 64ths. The scribe is missing. Some patina and dirt but legible, G+ ........ $45.00
    Picture

  6. L. S. STARRETT REVERSIBLE PROTRACTOR HEAD WITH 24-INCH RULE, The slot of the protractor is in the center of the head, so, you can use it both ways, instead of having to reset the square to mark from the other side. Satin chrome rule No. 4 graduated in 8ths, 16ths, 32nds and 64ths. Minor patina but completely legible, Fine ........ $95.00
    Picture

  7. L. S. STARRETT REVERSIBLE PROTRACTOR HEAD WITH 18-INCH RULE, The slot of the protractor is in the center of the head, so, you can use it both ways, instead of having to reset the square to mark from the other side. Satin chrome rule No. 16R graduated in 32nds, 50ths, 64ths and 100ths. Some spots of patina won't effect use, Fine ........ $85.00
    Picture

  8. UNION COMBO SQUARE WITH CENTER-FINDER. 6-inch, Graduated in 8ths, 16ths, 32nds and 64ths. Has combo square head with level, Missing the scribe, and the center head. Some pitting on the rule, but completely legible, G+ ........ Sold $30.00
    Picture

  9. MOORE & WRIGHT NO. 400, MACHINIST'S SQUARE, 2 1/4 inch blade. Sheffield, England. Not graduated. There are a few minor rust spots, G++ ........ Sold $22.00
    Picture

  10. STANLEY NO. 2, Try & Miter Square, 12 inch size, Sweetheart logo on the blade. Rosewood handle with brass trim. There is some patina on the blade, but the graduations are legible, G+ ........ $30.00
    Picture

  11. STANLEY NO. 12, Try Square, 6 inch size. Notched-rectangle logo. Graduated in 8ths. Very nice condition, Fine ........ Sold $25.00
    Picture

  12. STANLEY NO. 12, Try Square, 8 inch size. Sweetheart logo on the blade, which is graduated in 8ths. Iron handle. Light patina, G+ ........ $20.00
    Picture

  13. STANLEY NO. 15, Try and Miter Square, 7 1/2 inch size, The SR & L logo dates this one to around 1915. 90% of the nickel plating remains, G+++ ........ $35.00
    Picture

  14. STANLEY NO. 20, Try Square, 8 inch size, Notched-rectangle logo on the blade. Rosewood handle with brass trim. Some minor dirt and dings. I have 4, G+ ........ $20.00 ea.
    Picture

  15. STANLEY NO. 20, Try Square, 7 1/2 inch size, Sweetheart logo on the blade. Rosewood handle with brass trim has the globe decal. GS owner's initials. Some minor dirt and dings. I have 4, G+ ........ $20.00 ea.
    Picture

  16. STANLEY NO. 21, 9-inch COMBINATION SQUARE. V logo and Pat. 4-23-(19)17 stamped on the blade. A nickel plated combination square with a slot in the blade for it to reverse without coming loose. Nice plating, G++ ........ $40.00
    Picture

  17. DISSTON No. 5 1/2, 10 inch Try Square, Iron handle and blued blade with inches and metric graduations. New-old-stock, Fine ........ $75.00
    Picture

    Framing Squares [CLICK TO ORDER]

    1. STARRETT NO. 110 STAIR GAGE OR FENCE, A long bar that fits across a framing square. It has a 90 degree angle to make a wide face for use. This is the 18 inch model. These are no longer produced. Nickel plated angle-stock with two sliding spring-loaded clips to attach to a framing square. Used to mark stair stringers, rafters, or anytime you need to repeat a consistent angle. This size will do about a 6 by 11 inch inside angle, like for a stair tread, but will leave a much longer end on the other side for rafters, etc.
      Starrett is the only company I know that ever produced something like this. 96% of the nickel plating remains, with some tool-box scratches. Shown on a framing square that is not included, Fine ........... $125.00
      Picture

    2. THE STANDARD TAKE-DOWN FRAMING SQUARE. Beveled joint with a fixed circular locking screw has a flat side to release. Tapered blade. Marked with a 1917 copyright date. Has polygon (where to set your stair gauges for different-sided shapes), brace measure, rafter table and Essex board-measure scales, G+ .......... $85.00
      Picture

    3. PEXTO TAKE-DOWN FRAMING SQUARE. Beveled joint with a fixed circular locking screw has a flat side to release. Tapered blade. Has brace measure, rafter table and another scale that I'm not familiar with. Some light pitting, but completely legible, G+ .......... $80.00
      Picture

    4. TAKE-DOWN FRAMING SQUARE, Tapered blade, Has a T/D logo in a shield. Feb 27, 1906 patent date, and another that is faint. Beveled joint with two cam-screws to lock. Has rafter, brace measure, and octagon scales. Some light stain, but completely legible, G++ .......... $80.00
      Picture

    5. P. S. & W. FRAMING SQUARE, Tapered ends. Octagon, brace and board measure scales. Missing a lot of its thin nickel plating, but crisp, G+ .......... $40.00
      Picture

    6. STANLEY 12 INCH FRAMING SQUARE, NO. 12.. Graduated in 1/8ths and 1/16ths inches. The graduations are legible, G+ .......... $20.00
      Picture

    7. S & CO.NO. 141, 6 INCH FRAMING SQUARE. I'm not sure who the mfr. is. Graduated in 8ths and 16ths. 80% of the nickel plating remains, G+ ........ $15.00
      Picture

    Bevel Squares [CLICK TO ORDER]
    1. UNION TOOL CO. NO> 610 BEVEL PROTRACTOR - Shaver patent, marked June 11, 1918. The smaller blade is gone, and a 12-inch Union rule is in its place ( I have an original catalog that shows this as a legitimate use for larger work. The remaining short blade is wide to provide a reversible feature.
      This bevel performs more functions than I can imagine. From a try-square (pictured), to more complex bevel layouts. This is a rare tool. I have seen only two others, G+ ........... $95.00
      Picture As Square
      Picture

    2. BEVEL SQUARE - 18-inch. Rosewood with steel square. Probably Late 19th century English. This is the biggest one I have seen that was not all wood. Owner's initials pricked by the screw, G++ ........... $165.00
      Picture

    3. GOODELL PRATT TOOLSMITHS, 12 BEVEL SQUARE. 12 inch blade. A top-of-the-line bevel with a fully brass-bound rosewood handle. The lacquer finish is worn and there are owner's initials. It could use a bit of cleaning, G+ ......... $90.00
      Picture

    4. STANLEY NO. 1 TRY AND MITER SQUARE. Four inch length. This is the Winterbottom's Patent. Type I with the iron frame handle and black walnut inlay. Has the 1869 and 1874 patent dates stamped in the wood, and the lead fill around the three rivets.
      Some stain but no pitting on this early square in the smallest size. I think it is nicer than the picture shows, G++ ............ $50.00
      Picture

    5. TOPPS FRAMING TOOL. This is the earlier model marked Pat. Nov. 1, 1892. Although there is some stain on the blade, the etched scales are 80% legible. It is actually in very nice condition, compared to most examples. It's about 12 inches long, G++ ........... $35.00
      Picture

    6. STANLEY NO. 16, BEVEL SQUARE, 12 inch, Early J trademark stamped on the blade. Iron-framed, walnut-filled handle. A rare, early bevel, G+ ........... $45.00
      Picture

    7. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 8 inch. STANLEY logo cast in body. 98% of the nickel plating remains, with some minor tarnish spots, Fine ........... Sold $40.00
      Picture

    8. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 8 inch. STANLEY logo cast in the body. 90% nickel plating (pic shows the bad spot), G++ ........... Sold $25.00
      Picture

    9. STANLEY NO. 18, EUREKA FLUSH T BEVEL, 10 inch, STANLEY logo cast in body. 96% of the nickel plating remains, with minor tarnish - the front of the blade is not black, it is the same as the back end, Fine ........... $45.00
      Picture

    10. STANLEY NO. 25, 6 inch Sliding T bevel. Sweetheart logo on the blued blade. STANLEY in gold on the rosewood body. Very crisp with some minor patina, Fine ........... $30.00
      Picture

    11. STANLEY NO. 25, 6 inch Sliding T bevel. Rosewood handle. Notched-rectangle logo on the blued blade that has a few spots of rust. STANLEY in gold on the rosewood body, G++ ........... Sold $20.00
      Picture

    12. STANLEY NO. 25, 8 inch Sliding T bevel. Rosewood handle. Notched-rectangle logo on the blued blade. STANLEY in gold on the rosewood body, with minor wear to the finish, Fine ........... $25.00
      Picture

    13. STANLEY NO. 25, 10 inch Sliding T bevel. Type II with the Pat. Sept 4, 1872 patent date in a circle on the wood. Rosewood and brass. Crisp, G++ ........... $40.00
      Picture

    14. STANLEY NO. 25, 10 inch Sliding T bevel. Notched-rectangle logo on the blade. Rosewood and brass. Crisp, Fine+ ........... $40.00
      Picture

    15. STANLEY NO. 25, 12 inch Sliding T bevel, Sweetheart logo on the blade. Rosewood handle with brass trim. Has some patina, G+ ........... $40.00
      Picture

    16. ZENITH 6 inch bevel, made by DISSTON. Similar to the Stanley No. 25, G+................. $20.00
      Picture

    17. STANLEY DEFIANCE, Sliding T bevel, Blued steel. Virtually all of the original finish remains, Fine ........... $20.00
      Picture

    Angle Dividers [CLICK TO ORDER]
    1. STANLEY NO. 30 ANGLE DIVIDER, Used to divide or bisect an angle where two boards need to be cut to fit, or layout 4, 5, 6,8 and 10 sided figures. Has basically all of the nickel plating, Fine ..... $110.00
      Picture

    2. STANLEY NO. 31 ANGLE DIVIDER, the early model with a rosewood body. This model didn't have the cross-bar at the bottom, it is complete. Script logo on the blade. Has almost all of its nickel plating. A. J. Gilliam stamped his name on it a couple of times, but this is a very nice example of a rare tool, G++ ..... $135.00
      Picture

    Marking Gauges [CLICK TO ORDER]
    1. NESTOR'S PATENT CLAPBOARD GAUGE. This over-the-top showy brass and mahogany? gauge was patented on Dec 31, 1867, by John Nester, of Portland, Oregon. Its features include a clapboard marker, to mark the ends of siding to the proper length; a marking gauge; a level; and a 12 inch rule.
      Quite an historically and artistically spectacular early tool for the work it was designed to do. It has some minor tool-box dings, but is still fully functional. Has been lightly cleaned, G++ ............ $215.00
      Picture
      Picture

    2. A. MATHIESON & SON, GLASGOW, MORTISE GAUGE. Rosewood with brass trim and several owner's marks. Pretty crisp and a litle dirty, G+ ............ Sold $35.00
      Picture

    3. EARLY BEECH MARKING GAUGE, Has a brass-faced head. Owner's name on the side, G+ .............. Sold $20.00
      Picture

    4. ROSEWOOD MORTISE GAUGE, This one is made from rosewood with brass trim. Although it is unmarked, the bulls-eye trim decoration was used by the Chapin Stephens firm. It is in overall very crisp condition with some scuffs along the top of the stem from tightening the fastening screw. Has two brass bars on the face and a brass wear plate on the stem, G+ .............. $50.00
      Picture

    5. SANDUSKY BEECH SLITTING GAUGE, Unmarked by manufacturer, but was made by Sandusky. It can be used as a marking gauge. Has a handle like one on a plane. Beam will work to 18 inches. It's pretty crisp, and has had light use, but it's dusty, G++ ............ $75.00
      Picture

    6. STANLEY NO. 61, MARKING GAUGE, Beech with beech thumbscrew. Square head. Sweetheart logo on the stem. It was never used, but there is a bit of stain from storage, Fine ............ $15.00
      Picture

    7. STANLEY NO. 65, MARKING GAUGE, Early style.Boxwood. Square head with brass thumbscrew. Sweetheart logo on the stem. There are a couple of chips on the head, G++ ............ Sold $35.00
      Picture

    8. STANLEY NO. 65, MARKING GAUGE, Early style.Boxwood. Square head with brass thumbscrew. Sweetheart logo on the stem, G+ ............ $20.00
      Picture

    9. STANLEY NO. 47-065, MARKING GAUGE, This is the later maple? model that has the triangular head and stem. You can angle the point and drag it to prevent tear-out. Very crisp with a few scuffs, Fine ............ Sold $35.00
      Picture

    10. STANLEY NO. 65, MARKING GAUGE, Beech. Made in USA logo on the stem with patent numbers. This is the later model that has the triangular head and stem. You can angle the point and drag it to prevent tear-out. There is some dirt, and the stem under the point is a bit worn, but it is completely usable, G++ ............ $30.00
      Picture

    11. STANLEY NO. 165, MARKING GAUGE, Boxwood. Square head with brass thumbscrew. It is not marked, but by Stanley. The moustache wear plate is on one side of the head. The other side has the patented-in-1886 face plate with a bump on each side for convex or concave marking. That is what gives it the No. 165 designation, G+ ............ $35.00
      Picture

    12. STANLEY NO. 72, MARKING AND MORTISE GAUGE, Beech. Sweetheart logo on the stems. This one has had very little use. It is crisp but has some scuffing on the face, and on the stems from the screw, G++ ............ $35.00
      Picture

    13. STANLEY NO. 73, MORTISE GAUGE, Boxwood. Square head with brass thumbscrew, A little shorter than the other numbers at 6 inches long. Marked with the STANLEY logo and the number on the back of the head. Graduations to three inches for the slide. A crisp example with a couple of dings on the back of the head, Fine .......... $80.00
      Picture
      Picture

    14. STANLEY NO. 77, MORTISE GAUGE, Has the Sweetheart logo on the back of the head. Rosewood and brass. One side is a marking gauge, the other is a mortise gauge. This is in very crisp condition with minor dings, and the points are long. It has the shoe for the tightening screw, Fine ..........Sold $85.00
      Picture

    15. STANLEY NO. 85 1/2, PANEL GAUGE, Rosewood and brass. With a 20 inch length, it is useful for scribing panels and other wide boards. This one is marked only with the Stanley Aug. 5, 1873 patent date on the stem. It is complete and still in very crisp condition, Fine .......... $110.00
      Picture

    16. In the Box STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. 100% nickel plating remains. Looks unused, Fine+ ............ $45.00
      Picture

    17. In the Box STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. 100% nickel plating remains. Looks unused, Fine+ ............ $40.00
      Picture

    18. STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. 85% nickel plating remains. Good point, G++ ............ $25.00
      Picture

    19. STANLEY NO. 90 MARKING GAUGE, One adjustable arm with graduations. The nickel plating is dull. Good point, G+ ............ $20.00
      Picture

    20. In the Box STANLEY NO. 91 MARKING & MORTICE GAUGE, Notched-rectangle logo. Two graduated adjustable arms with points. All of the nickel plating remains,like new. The box has minor damage, Fine+ ............ $65.00
      Picture

    21. STANLEY NO. 91 MARKING & MORTICE GAUGE, Sweetheart logo on the thumbscrew. Two graduated adjustable arms with points. Most of the nickel plating remains, Fine ............ $35.00
      Picture

    22. E. C. STEARNS MORTICE GAUGE. Like the Leavett Patent. All steel with two arms. The long one is graduated. Roller cutters won't follow the grain. These are very high quality. 80% nickel plating remains, G+ ............. $45.00
      Picture

    23. STANLEY NO. 92 BUTT and RABBET GAUGE, 1892 patent date on the body. Used for laying out door hinges and strikes. It's also useful as a marking and mortise gauge. Complete with the steel scribe on the side. Has a re-glued split on the back between the brass plate and the bottom. otherwise very crisp with minor wear, Fine ............ $60.00
      Picture

    24. STANLEY NO. 93 BUTT and RABBET GAUGE, V logo on the thumbscrew dates this one to around 1910. Used for laying out door hinges and strikes. It's also useful as a marking and mortise gauge. Virtually all of the nickel plating remains, Fine ............ $50.00
      Picture

    25. In the Box STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. 99% of the nickel plating remains. In the orginal box, which has some damage. I will include a copy of the instructions, Fine+ ............ $35.00
      Picture

    26. STANLEY NO. 95 BUTT GAUGE, An earlier (1900) and smaller one. Used for laying out door hinges. It's also useful as a marking gauge. 90% of the nickel plating remains. I will include a copy of the instructions, G++ ............ $25.00
      Picture

    27. STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. WW II vintage with 99% of the japanning remaining, Fine ............ $25.00
      Picture

    28. STANLEY NO. 95 BUTT GAUGE, Used for laying out door hinges. It's also useful as a marking gauge. Almost all of the nickel plating remains. I will include a copy of the instructions, Fine ............ $20.00
      Picture

    29. In the Box STANLEY NO. 97, MARKING GAUGE Notched-rectangle logo on the thumbscrew. One side of the arm has the usual point, the other, the round wheel for marking difficult grain. All of the nickel plating remains,like new, Fine+ ........ Sold $65.00
      Picture

    30. STANLEY NO. 97, MARKING GAUGE Sweetheart logo on the thumbscrew. One side of the arm has the usual point, the other, the round wheel for marking difficult grain. 50% nickel plating remains. Has been cleaned, G ........ $15.00
      Picture

    31. In the Box STANLEY NO. 98, MARKING AND MORTISE GAUGE One side of the arms have the usual points, the other, the round wheels for marking difficult grain. The arms set individually for a marking gauge, or to use for a mortise gauge. All of the nickel plating remains,like new. The box has minor damage, Fine+ ........ $95.00
      Picture

    32. STANLEY NO. 98, MARKING AND MORTISE GAUGE One side of the arms have the usual points, the other, the round pizza-wheels for marking difficult grain. The arms set individually for a marking gauge, or to use for a mortise gauge. 90% nickel plating remains. It could use a bit of cleaning, G+ ........ Sold $35.00
      Picture

    33. THREE-ARM ROLLER GAUGE. The only maker I know of is Goodell Pratt. This one is a little different than my catalog. They may have changed over the years. Three arms with roller gauges, the two long ones can be reversed for points. 85% nickel plating with some minor patina, G+........ $85.00
      Picture

    Caliper Squares [CLICK TO ORDER]

    1. STARRETT, NO. 296 CALIPER SQUARE, Four=inch length, G+ .......... $20.00
      Picture

    2. LUFKIN RULE CO., NO. 455 INSIDE - OUTSIDE CALIPER SQUARE, 5 inch length, Rule graduated in 32nds, caliper in 32nds and 64ths. Owner's initials, G+ .......... Sold $25.00
      Picture

    3. D. B. & S PROV., R.I. (DARLING BROWN & SHARPE) CALIPER SQUARE, 4 1/2 inch size, 5 1/4 inch overall length. D. B. & S. is an early U.S. manufacturer that eventually became BROWN & SHARPE MFG .CO. Graduated in 16ths, 32nds, 64ths, and 100ths, G++ ........ Sold $55.00
      Picture

    Machinist's Tools [CLICK TO ORDER]

    CLICK HERE FOR A LIST OF LEGS CALIPERS FOR SALE
    1. J. STEVENS ARMS & TOOL CO. IDEAL SURFACE GAUGE. Patented Sept. 23, 1884 stamped on the side. 12-inch. Very crisp with minor patina, Fine .................. $150.00
      Picture

    2. STARRETT 56B TOOLMAKER'S SURFACE GAUGE. In the box. four-inch size, Fine .................. $35.00
      Picture

    3. EARLY DIVIDERS AND CALIPER SQUARE, Probably early 19th-century. Very well-made and in very nice condition, Fine .......... $90.00
      Picture

    4. STARRETT NO. S191 JACK SCREW. In the box. Has three bases to attain the height of up to 3 1/4 inches. There is an auxiliary point screw and two extensions to be used where it is not possible to have a flat surface, Fine .................. $30.00
      Picture

    5. STARRETT MACHINIST'S CAP. Looks like from the 1930s. Cotton top, Oilcloth on cardboard brim. " Campbell's& on back side. Size 7 1/4. Hasn't been used, Fine .......... $35.00
      Picture

    6. STODDARD PATENT DIVIDERS. Bronze, 9-inch length. The end of one point reverses for a pencil point. Marked Pat. Apl'd For. Owner's name on the back, G+ .......... $95.00
      Picture

    7. A. MATHESSON & SON DIVIDERS, 6-inch length. Early and very nice, G+ ........... $75.00
      Picture

    8. EARLY 13-INCH DIVIDERS. Heavy old pair. Has some pitting, but still functional, G ........................ $65.00
      Picture

    9. SCHOLLHORN 9 1/2-INCH DIVIDERS. The early model with the Jan. 9, 1868 patent date. Has number 58 stamped on the parts because they were hand-fitted, G+ ........................ $95.00
      Picture

    10. PEXTO WING DIVIDERS, 10 inch. Great company, great user, G+ ........... Sold $35.00
      Picture

    11. L. S. STARRETT. NO. 272A FILLET OR RADIUS GAGE, 1/32 to 17/64, by 64ths. In their box, Fine ....... Sold $15.00
      Picture

    12. REGISTERING CALIPER. Small size - three inches overall. Tight-joint. Graduated from 0 to 2 inches outside. Not marked by Mfr, but has owner's initials, G+ ....... $30.00
      Picture

    13. J. STEVENS & CO. 4 INCH THREAD CALIPER, the company that made firearms and precision tools. Earlier logo. Marked Pat. Nov. 20, 1883, that's the Warfield patent, G+ ........ $30.00
      Picture

    Trammel Points [CLICK TO ORDER]
    1. L.S. STARRETT CO. NO. 51 EXTENSION BEAM TRAMMEL POINTS. Early nickel-plated brass big ones (nine-inch points) that clamp on a stick for use. Includes caliper points with a fine-adjustment. In very nice condition on an owner-made bar for display, Fine ....... $95.00
      Picture

    2. BRONZE TRAMMEL POINTS. Craftsman-made. Five inches high. Nice patina, Fine ...... $80.00
      Picture

    3. STANLEY NO. 1 TRAMMEL POINTS. The smallest-sized brass trammel with the early decorative casting design. It has the pencil holder attachment, G++ ...... $60.00
      Picture

    4. STANLEY NO. 3 TRAMMEL POINTS. 5 inches tall. The large-sized brass trammel with the later cross-hatch design. Still has almost all of the original lacquer with some stain from age, Fine ...... $70.00
      Picture

    5. STANLEY NO. 3 TRAMMEL POINTS. 5 inches tall. The large-sized brass trammel with the later cross-hatch design, G+ ...... $50.00
      Picture

    6. STANLEY NO. 2 TRAMMEL POINT. Sweetheart logo on the point. The medium-sized brass trammel with cross-hatch design. In brand-new, original condition. Use this one as a third point to draw an ellipse, Or, if you already have one, make a pair, Fine++...... $25.00
      Picture

    7. STANLEY NO. 4TP TRAMMEL POINTS. Later gray model in the box. Has a pencil-holding feature. About 3 1/2 inches long. Minor wear to the box, Fine ...... $35.00
      Picture

    8. STANLEY NO. 4 TRAMMEL POINTS. Earliest model, with japanning, at least 80% remains but it doesn't look like it in the picture. Has a provision to attach a pencil. About 3 1/2 inches long, G++ ...... $35.00
      Picture

    9. STANLEY NO. 4 TRAMMEL POINTS. Later gray model. Has a screw slot to attach a pencil. About 3 1/2 inches long, Fine ...... $30.00
      Picture

    10. GOODELL PRATT NO. 134 BEAM TRAMMELS. A 16-inch beam.The points are ground eccentric for fine adjustment, G+ ...... $50.00
      Picture

    11. L. S. STARRETT NO. 50, IMPROVED TRAMMEL POINTS. These are the early Cook's Patent trammels from the late 1800s. Nickel plated bronze. Most of the nickel plating remains, Fine ...... $70.00
      Picture

    12. L.S. STARRETT CO. NO. 50-A TRAMMEL POINTS. Earlier heavy brass nickel-plated style just after the Cook patent ones. With fine adjustment. Owner's initial lightly scratched on them. With tool-box dings. Great users, G+ ...... $40.00
      Picture

    13. L.S. STARRETT CO. NO. 50-B TRAMMEL POINTS. Earlier heavy brass nickel-plated style just after the Cook patent ones. Without fine adjustment. With tool-box dings. Great users, G+ ...... $35.00
      Picture

    14. In the Box L.S. STARRETT CO. NO. 59-F TRAMMEL POINTS SET. Complete with long and short straight and curved points, and the set of spheres to center on a hole. Basically new with some wear to the box, Fine ...... $100.00
      Picture

    15. STANLEY PENCIL HOLDER FOR TRAMMEL POINTS. Clips on to the point and a pencil, Fine...... $15.00
      Picture

    Rules and Tape Measures [CLICK TO ORDER]
    1. LUFKIN NO. SR12 SNAP RULE. One-foot rulf that rolls up for storage Metric scale on the back, G+ ........... $15.00
      Picture
      Picture

    2. MASTER RULE CO., NO. X-6, Six-foot zigzag with extension slide, Fine ........... $25.00
      Picture

    3. MASTER RULE MFG. CO. INTERLOX NO. 106, 6 FOOT INSIDE-OUTSIDE RULE, Not a zig-zag, the sections extend. One side is for inside measurement, the other is a six-foot extension rule. Graduated in 16ths, Fine ................... $30.00
      Picture

    4. THE C-S. CO., NO. 036 COMBINATION RULE. 1-foot, 2-fold, brass-bound inclinometer, level, bevel and try square. Made by Chapin Stephens before they were bought-out by Stanley. Very crisp condition. Some minor light pitting on the bevel from storage, Fine ........... $150.00
      Picture

    5. LUFKIN FOLDING STEEL RULE. two-fold, two-foot. Graduated in 1/8ths on one side, circumference inches - in 1/8ths - on the other. Some stain and minor pitting, G+ ...... $35.00
      Picture

    6. GENERAL HDW. MFG. CO. FOLDING STEEL RULE. three-fold, three-foot. Graduated in 1/8ths and 1/16ths, with two inches of 32nds. Stainless with raised etch. The top leg is a bit faded, Fine ...... $30.00
      Picture

    7. L. S. STARRETT. NO. 300 SEMI-FLEX RULE,Twelve inch rule is one inch wide. Graduated in 16ths, 8ths, 32nds, and 64ths (No. 4 graduations).New-old-stock. I have a few if you want more than one, Fine ++ ....... $15.00
      Picture

    8. D. B. & S. (Darling, Brown & Sharpe) RULE 24 by 2 inches. An early American machinist's rule with a great owner-made wooden sleeve. No. 4 graduations (8ths, 16ths, 32nds and 64ths).
      There is some patina and a few spots of rust, but 99% of the graduations are legible, G+ ........... Sold $60.00
      Picture

    9. RULE HOOK. Unmarked except for Made in USA. Nickel plated brass. Holds the end of long tapes to get tension for more accurate measurement, Fine ........... $25.00
      Picture

    10. STANLEY RULE & LEVEL CO. NO. 16 ENGINEER'S SLIDING RULE. 2-foot, 2-fold. Fully-bound boxwood rule from the 2nd-half of the 19th century. This and the No. 6 were the most elaborately marked and graduated of the Stanley rules. This one is the fully brass-bound model.
      The Gunter's slide with scales are used to calculate volume and to perform conversions from different geometrical shapes, including the areas regular polygons of 5 to 12 sides (pentagon, hexagon, etc.) to square inches, and then to the volume of various liquids, like wine, or the weight of many metals, gold, iron, copper, etc.
      Very rare rule. There is some stain and dirt, G+ ..................... $145.00
      Picture
      Picture

    11. STANLEY, NO. 36 1/2 R, CALIPER RULE, One-foot,two-fold boxwood rule with brass trim. Notched-rectangle logo. 16ths on caliper. Graduated in 8ths, 10ths, 12ths and 16ths scales. Very crisp, new-old-stock, Fine ........... Sold $50.00
      Picture

    12. STANLEY, NO. 54 RULE. Type 2 with the S. R. & L. trademark inside - before 1902. Two-foot, four-fold, arch-joint, brass_bound rule. Crisp condition that was lightly cleaned at some time, Fine ........... Sold $55.00
      Picture

    13. STANLEY, NO. 62, FOLDING RULE, Two-foot, four-fold. Fully brass-bound boxwood rule. Sweetheart logo. Crisp and very nice with some minor patina on the brass, Fine ........... Sold $50.00
      Picture

    14. STANLEY, NO. 62 1/2, FOLDING RULE, Two-foot, four-fold. Fully brass-bound boxwood rule. Type 2 with the S. R. & L. trademark inside - before 1902. Crisp and very nice with some very slight warping, Fine ........... Sold $50.00
      Picture

    15. STANLEY, NO. 63, FOLDING RULE, Two-foot, two fold. Type 2 Stanley Rule & Level Co., pre-1902. Architect's scales inside. Crisp but missing a pin, Fine ........... $50.00
      Picture

    16. STANLEY, NO. 63, FOLDING RULE, Two-foot, two fold. Sweetheart logo. Architect's scales inside. Crisp with very minor warping, Fine ........... $40.00
      Picture

    17. STANLEY, NO. 66 1/2, FOLDING RULE, three-foot, four-fold. Boxwood. Sweetheart logo. New-old-stock. Very crisp, Fine ........... Sold $20.00
      Picture

    18. STANLEY, NO. 84, FOLDING RULE, Two-foot, four-fold. Half-bound boxwood rule with drafting scales. S. R> & L. logo on the inside and STANLEY logo on the outside dates it between 1879 and 1921. Graduated in 8ths and 16ths, which puts it in the early side of those dates. Missing two pins. Very crisp, Fine ........... $65.00
      Picture

    19. STANLEY, NO. 136 1/2, CALIPER RULE, 6 inch boxwood rule with brass caliper. Made in USA mark, G+ ........... $15.00
      Picture

    20. STANLEY NO.167 BRICK MASON'S ZIG ZAG RULE, 6 foot zig zag rule. Graduated in 16ths on one side, and the other has scales to gauge the height of courses of bricks to ensure uniform mortar thickness, G++ ................... $20.00
      Picture

    21. STANLEY NO.906 ZIG ZAG RULE, This brand-new 6 foot zig zag rule, which was manufactured in the 1930's has English graduations, which means it's graduated left to right. These came from a cache of unused military surplus from WW II, yellow paint, New ................... $45.00
      Picture

    22. LUFKIN, NO. X46F, Zig Zag Extension Rule, 6 foot, With brass extension slide for inside work. Some minor dirt and wear, Fine ................... $40.00
      Picture

    23. THE LUFKIN RULE CO., 460 CM60CM ZIG ZAG RULE, Metric, 2 meter length, G++ ................... $35.00
      Picture

    24. THE LUFKIN RULE CO., NO. 1206, Saginaw, Mich. Aluminum 6 foot Zig Zag, G++ ................... $25.00
      Picture

    25. KEUFFELL & ESSER CO., 100 FOOT "STEVENS ALBADURE" STEEL TAPE, Graduated in 8ths and feet. The leather case has some minor wear and owner's name on the reel handle, and minor stain on the blade, G+ ........... $30.00
      Picture

    26. LUFKIN RULE CO., 100 FOOT "LEADER" STEEL TAPE, Chrome-clad. Graduated in 8ths and feet. The leather case has some wear, G+ ........... $25.00
      Picture

    27. LUFKIN RULE CO., 100 FOOT "BANNER" STEEL TAPE, White clad. Graduated in 8ths, G++ .......... $30.00
      Picture

    28. LUFKIN RULE CO., 50 FOOT "BANNER" STEEL TAPE, Ni-clad. Graduated in 8ths, G++ .......... $20.00
      Picture

    29. LUFKIN RULE CO., 50 FOOT "BANNER" STEEL TAPE, White clad. Graduated in 8ths, G++ .......... $25.00
      Picture

    30. LUFKIN RULE CO., 50 FOOT "UNIVERSAL" STEEL TAPE, An earlier one with an etched and blued blade, G+ .......... $20.00
      Picture

    31. LUFKIN RULE CO., "MILL MENS" STEEL TAPE, 300 continuous inches (25 feet). No foot markings, just inches. Chrome clad, G++ .......... $45.00
      Picture

    32. LUFKIN NO. C310, 25 FOOT "ANCHOR" STEEL TAPE, Chrome-clad, leather cover. In the original box with instructions, Fine ...........$40.00
      Picture

    33. LUFKIN IMPROVED METALLIC TAPE. 50 FOOT CLOTH TAPE with steel threads. Leather case, 4 1/4 inches in diameter. Graduated in 1/2 inches, G+ ........... $30.00
      Picture

    34. LUFKIN EXECUTIVE DIAMETER WHITE CLAD TAPE RULE, 6 foot tape that measures diameter to 64ths of an inch, in the original box, Like new ............ $25.00
      Picture

    35. STANLEY DEFIANCE NO. 1261 TAPE RULE, 6 foot tape measure, Fine ............ $15.00
      Picture


    Back To Tool Index Back to Homepage