This is a list of metallic planes for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll down this list and click to see an image. This section is divided into Stanley Planes, Other Brands, Block Planes, Scraper Planes, and Combination Planes.
Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

I have a New Plane Showcase that has thumbnail pictures and descriptions of some interesting planes. I also have information of some that have been sold. I am breaking up the Showcase into separate categories to make it easier to use. Click here to go to the Plane Showcase

  Wooden Planes     Back To Tool Index    Back to Home page

Stanley Planes [CLICK TO ORDER]

1. STANLEY NO. 1 SMOOTH PLANE, Sweetheart trademark on the full-length cutter. 92% of the japanning on the body. Rosewood low knob and handle are crisp. The handle has a sliver off of the top left side.
   This one has been used, but not abused. There has been speculation that carpenters that used a No. 1 held it across the top instead of trying to use the handle and knob. The wear-patterns on this one support that theory, G+ ........ $1425.00
   Picture

2. STANLEY NO. 2 SMOOTH PLANE, Sweetheart logo on the cutter - close to full-length. 99% of the japanning on the body remains. The nickel plating on the cap is very nice. Rosewood tall knob and handle are very crisp. There is some minor patina on the bare metal surfaces from age, Fine ....... $395.00
   Picture

3. STANLEY NO. 3 SMOOTH PLANE, Notched-rectangle logo on the full-length cutter. 98% of the japanning on the body. Crisp, dark rosewood handle and tall knob have a few tool-box dings. Has been lightly cleaned, G++ .... Sold $90.00
   Picture

4. STANLEY NO. 3 SMOOTH PLANE, V logo on the cutter with 1 3/4 inches of meat. Stanley on the key-hole cap. 95% of the japanning on the body. Crisp earlier rosewood handle and tall knob.
   This is one that I can't date. The cap and cutter may be a little earlier - it has a frog adjusting screw.
   There is some slight roughness on the bare metal surfaces. Has been lightly cleaned, G+ .... $60.00
   Picture

5. STANLEY NO. 3C SMOOTH PLANE, Notched-rectangle logo on the cutter with 1 3/4 inches of life left. 95% japanning with some dirt. Crisp dark rosewood handle and tall knob have some tool-box dings. Has been lightly cleaned, G++ ........ $90.00
   Picture

6. STANLEY NO. 4 SMOOTH PLANE, eARLY ONE WITH THE (18)92 PATENT DATE ON THE CUTTER, WITH 1 1/4 INCHES OF MEAT LEFT. s CASTING MARK ON THE BED. 90% JAPANNING. dARK ROSEWOOD Handle and low knob are nice but have some tool-box dings, G+ ..... $70.00
   Picture

7. STANLEY NO. 4 SMOOTH PLANE, Sweetheart logo on the cutter with 2 inches of life. (19)10 patent date cast in the bed. 70% japanning. The nickel on the cap is worn. Tight crack in the rosewood handle. A good user, G ........ Sold $50.00
   Picture

8. STANLEY NO. 4C SMOOTH PLANE, 1910 patent date cast in the bed. Sweetheart logo on the cutter, with 1 3/4 inches of blade left. Rosewood handle and tall knob are crisp but have a some minor dings. 95% japanning. Some patina to the bare metal surfaces, G++ ........ Sold $95.00
   Picture

9. STANLEY NO. 4C SMOOTH PLANE, 1910 patent date cast in the bed. Sweetheart mark on the cutter, with 1 1/4 inches of blade left. 90% japanning remains. Crisp rosewood handle and tall knob have some tool-box dings. Minor roughness on the sole. Has been lightly cleaned, G+ ....... $80.00
   Picture

10. STANLEY NO. 4C SMOOTH PLANE, 92 patent date on the nice, full length cutter. B casting mark on the bed dates to 1900. Rosewood handle and short knob are pretty crisp but have a few minor nicks and dents. 90% japanning. Some minor roughness on the sole might want to be lapped. A good plane, G+ ..... Sold $80.00
    Picture

11. STANLEY NO. 4 1/2 C SMOOTH PLANE, Corrugated bottom. A wide heavy plane used for major smoothing. Notched-rectangle logo on the near full-length cutter. Dark rosewood handle and short knob are very nice with a few dings to the finish. 98% japanning, 95% nickel plating. There is some light patina on the bare metal surfaces, Fine ......... Sold $125.00
    Picture

    Note: I have jointer fences in my miscellaneous section They will fit both wooden and metallic planes from jack-size to jointer.

12. STANLEY NO. 5, JACK PLANE, Notched-rectangle logo on the full-length cutter. 99% japanning. Dark rosewood handle and tall knob are crisp, but have some chips to the finish. Fine ........... Sold $100.00
    Picture

13. STANLEY NO. 5, JACK PLANE, Made in Canada cast in the bed and on the sweetheart cutter with 1 3/4 inches of meat left. 99% japanning. Crisp dark rosewood handle and tall knob. Some minor patina on the bare metal surfaces, G+++ .............. $80.00
    Picture

14. STANLEY NO. 5, JACK PLANE, Notched-rectangle logo on the full-length cutter. 99% japanning. There is a hang-hole in the rear. Rosewood tall knob and handle, which has a break in the middle, and a paint smear. The plane is crisp with some minor stain and rust. A great user, G++ .............. $55.00
    Picture

15. STANLEY NO. 5C, JACK PLANE,Sweetheart trademark on the cutter with 1 3/8 inches of life left. 90% japanning on the body, and nickel plating on the earlier key-hole cap. Rosewood handle and tall knob are crisp with some tool-box dings and paint spatters. Some minor patina on the bare metal surfaces. Could use a light cleaning. A good user, G+ ........... $70.00
    Picture

16. STANLEY NO. 5C, JACK PLANE, Type 11. 3 patent dates cast in the bed, T trademark on the cutter with 2 inches of meat left, but it needs a little lapping. 95% japanning. Crisp dark rosewood handle and low knob. Some minor patina on the bare metal surfaces, G++ ........... Sold $100.00
    Picture

17. STANLEY NO. 5C, JACK PLANE, 1892 patent date on the cutter, which has 1 1/4 inches of life left. This one has been cleaned and repainted. The tip of the handle has been replaced. A great user, G+ .............. Sold $40.00
    Picture

18. STANLEY VICTOR NO. 1105, JACK PLANE, Notched rectangle mark on the full-length cutter. Grey enamel on the bed. Very crisp stained hardwood handle and tall knob have a few dings to the finish, G++ ........... $55.00
    Picture

19. STANLEY NO. 5 1/4 JUNIOR JACK PLANE, Made in USA trademark on the cutter which has 1 3/4 inches of meat left. Virtually all of the japanning and nickel plating remains. Crisp ebonized handle and tall knob have some tool-box dings to the finish, Fine+ .... $95.00
    Picture

20. STANLEY NO. 5 1/4 JUNIOR JACK PLANE, Notched-rectangle trademark on the cutter which has 1 3/4 inches of meat left. 99% of the japanning remains. Crisp rosewood handle and tall knob have some tool-box dings to the finish. Some stain to the bare-metal surfaces. Has been lightly cleaned, G++ .... $105.00
    Picture

21. STANLEY NO. 6C FORE PLANE, Early type 12. V trademark on the cutter with 1 inch of meat left. 96% japanning. The rosewood handle and tall knob are crisp with some tool-box dings. Small initials on the side. Has been lightly cleaned, G++ ......... Sold $120.00
    Picture

22. STANLEY NO. 7, JOINTER PLANE, Type 11. T trademark on the cutter with 1 3/4 inches of meat left. Three patent dates cast in the bed - (19)-02, -02 and -10. 90% japanning. Nice dark rosewood handle and low knob a few minor dings. Some patina on the bare-metal surfaces, G++ ...... $175.00
    Picture

23. STANLEY NO. 7C, JOINTER PLANE, (18)92 patent date on the cutter with 1 inch of life left. This one has been repainted. Rosewood handle has some chips, low knob. Some patina on the bare-metal surfaces. A good user, G ...... $70.00
    Picture

24. STANLEY NO. 8 JOINTER PLANE, Sweetheart logo on the cutter with 2 inches of meat - about full-length. 90% japanning. Earlier key-hole cap has most of its nickel plating with some scratches. Dark rosewood handle and tall knob have some dings and a minor chip. A crisp plane with some light patina from age on the bare-metal surfaces, G+++ ...... $205.00
    Picture

25. STANLEY NO. 8 JOINTER PLANE, Type 11. 3 patent dates on the bed. The full-length cutter has the V trademark. Has the adjustment screw behind the frog. 95% japanning. Very nice rosewood handle and low knob. Very crisp with some light patina on the bare metal surfaces, G++ ...... $225.00
    Picture

26. STANLEY NO. 8C JOINTER PLANE, Notched-rectangle logo on the cutter that is full-length. 99% japanning. Great nickel-plating on the cap. Very crisp dark rosewood handle and tall knob. Basically like new, Fine++ ...... $295.00
    Picture

    STANLEY NO. 9 1/2 BLOCK PLANE, Block Planes are listed farther down, past Other Planes

27. STANLEY NO. 10, CARRIAGE MAKER'S RABBET PLANE, V trademark (ca. 1910) on the cutter, which is near full-length. 96% japanning - some is missing from the back end. Crisp rosewood handle and short knob. There is patina on the bare metal surfaces. It is in original condition, so I am leaving it the way it is, Fine .......... $255.00
    Picture

28. STANLEY NO. 10 1/2, CARRIAGE MAKER'S RABBET PLANE, This one is the smooth plane size. (18)92 patent date on the cutter with 3/4 inches of meat left. 93% japanning on the body. Crisp early rosewood handle and low knob. Some roughness on the sole won't affect use, but could be lapped out. A very nice user, G++ .......... $225.00
    Picture

29. STANLEY NO. 20, CIRCULAR PLANE, Later japanned model. Notched-rectangle logo on the full-length cutter. The heaviest circular plane made by Stanley, it's considered the best one for using. 96% Japanning remains. Very clean sole. A great plane, Fine ............... $265.00
    Picture

30. STANLEY NO. 20, CIRCULAR PLANE, Early nickel plated model. (18)92 patent date on the cutter, 2-7-(18)93 patent date cast in the body. The heaviest circular plane made by Stanley. It's considered the best one for using. 95% nickel plating remains. There is some stain on the top of the sole from age. The bottom is a lot nicer. A very good example of an early plane, G+ ............... $275.00
    Picture

31. STANLEY RULE & LEVEL CO., No. 27, JACK PLANE. Wood Bottom (18)92 patent date on the cutter. This is a prime example of an early transitional (wood bottom) plane. 97% of the original finishes remain. Absolutely hasn't been cleaned. The owner stamped his name on the front and back. It has been a long time since I have seen one this nice. Fine+ ............ $165.00
    Picture

32. STANLEY RULE & LEVEL CO., No. 35, SMOOTH PLANE. Wood Bottom (18)92 patent date on the cutter. This is a prime example of an early transitional (wood bottom) plane. 97% of the original finishes remain. There are some paint scuffs on one side (shown) from planing a door or window. That may come off, but I just wanted to leave it original. Absolutely hasn't been cleaned. The only apology is that the owner stamped his name on the top of each side. It is super nice considering it is over 100 years old. Fine+ ............ $125.00
    Picture

33. STANLEY NO.39- 3/8 INCH, DADO PLANE, Sweetheart logo on the cap screw. Complete with good length to the cutter and spurs. Most of the japanning remains, with some dirt. Where it is worn, like on the sides of the handle, there is patina which looks good. The bare metal surfaces have some patina, G++ ............ $155.00
    Picture

34. STANLEY NO.39- 3/4 INCH, DADO PLANE, Sweetheart logo on the cap screw. Complete with good length to the cutter and spurs. Most of the japanning remains, with some dirt. Where it is worn, like on the sides of the handle, there is patina which looks good. The bare metal surfaces have some patina, G++ ............ $185.00
    Picture

35. STANLEY NO. 40, SCRUB PLANE, Used to quickly reduce the thickness of a board to the required size. Sweetheart logo on the cutter dates this one to around 1930. 90% japanning. Beech handle and tall knob are nice, G+ ........ $110.00
    Picture

36. STANLEY NO. 40, SCRUB PLANE, Used to quickly reduce the thickness of a board to the required size. V logo on the cutter. 95% japanning. Beech handle and tall knob are nice, but with some stain. Has been lightly cleaned, G+ ........ $90.00
    Picture

37. STANLEY NO. 48, TONGUE & GROOVE PLANE, Used to make a 5/16 inch tongue and groove joint on 3/4 inch to 1 1/4 inch boards, centering on 7/8 inch stock. B casting mark on the body dates this one to around 1900. Almost all of the nickel plating remains. One of the cutters has been sharpened on both ends, Fine+ ........ Sold $135.00
    Picture

38. STANLEY NO. 48, TONGUE & GROOVE PLANE, Used to make a 5/16 inch tongue and groove joint on 3/4 inch to 1 1/4 inch boards, centering on 7/8 inch stock. An early nickel-plated one with the ivy design on the handle. S casting marks and the same thumb screws as the japanned model, but nickel plated (which I haven't seen before). 80% of the nickel plating remains, G+ ........ $105.00
    Picture

39. STANLEY NO. 51 and 52, CHUTE BOARD AND PLANE, Notched-rectangle on the full-length cutter.
    A 21 3/4 inch long cast iron chute board with an adjustable 90-degree fence and hold-down clamp: and a skewed-angle clane that cuts on its side. Used to precisely trim miters for picture framers, cabinetmakers and pattern makers.
    95% of the japanning remains. The hold-down is original but the screw is a replacement and the nut is from a No. 45, which looks the same as the original. The sides of the plane have been lapped and polished. There is a small chip off of the side of the handle.
    A very good user, G++ ........ Sold $1195.00
    Picture - Front

    Picture - Back

    Picture - End

40. In the Box STANLEY NO. 71, OPEN-THROAT ROUTER, Looks like it's about the last Made in USA offering from Stanley. Has had little use. Complete with the shoe for closed-throat work, fence, and three cutters. 99+% nickel plating remains - the top is a little dusty. There are a few scuffs on the finish of the handles. In the original box with some damage, with the original instructions, Fine ........ $110.00
    Picture

41. In the Box STANLEY NO. 71, OPEN-THROAT ROUTER, Complete with three cutters, fence, and the shoe for closed-throat work.
    Crisp stained-hardwood handles. 95% of the nickel plating remains. It is a bit dull on the top and there are a few stains on the sole from sitting in the box. In the box with original instructions. A very crisp user, G++ ........ $130.00
    Picture
    Picture - Sole

42. STANLEY NO. 71, OPEN-THROAT ROUTER, An early one with the 10-28-(19)01 and 9-10-(19)07 patent dates cast in the bed. Complete with three cutters. 99% of the nickel plating remains. The maple handles are very crisp. I will include a copy of the instructions. A great example of an early plane, Fine+ ........ $95.00
    Picture p>
43. STANLEY NO. 71, OPEN-THROAT ROUTER, Made in USA. Complete with three cutters, fence and the shoe for closed-throat work. Virtually all of the nickel plating remains, but it is a bit dull and dusty. Ebonized hardwood handles have some scrapes to the finish. I will include a copy of the instructions, Fine ........ $95.00
    Picture

44. STANLEY NO. 71 1/2, CLOSED-THROAT ROUTER, Made in USA. Complete with three cutters and the fence. 98% nickel plating. The ebonized handles have some chips to the finish. I will include a copy of the instructions, Fine ........ $90.00
    Picture

45. STANLEY NO. 71 1/2, CLOSED THROAT ROUTER, an early one with the 10-29-(19)01 patent date cast in the bed. The very nice handles are maple. Complete with the 1/4 and 1/2 inch cutters. The nickel plating is very nice on the top. There are a few areas of rust on the sole. I'll include a copy of the instructions. An excellent user, G+ ........ $70.00
    Picture

    
    Picture - Sole

46. STANLEY NO. 72, CHAMFER PLANE, STANLEY and No. 72 cast in the body. J trademark on the cutter, that has good length. 85% japanning. The rosewood handle and knob are crisp but have some minor tool-box dings, G++ ........ $465.00
    Picture

47. Boxed STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, Has the Sweetheart logo on the cutter and the box. Later model with the cutter-adjustment lever. 99%+ black japanning remains, some very light stain from 70 years of storage. Complete with fence, depth stop and spur. In the original box, which is pretty nice, Fine+ ........ $140.00
    Picture

48. Boxed STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, Has the notched rectangle logo on the cutter. Has the cutter-adjustment lever. 99%+ black japanning remains. Complete with fence, depth stop and spur. In the original box, which is rough with a "Stanley Planes For Weatherstrip Work" leaflet,Fine ........ $115.00
    Picture

49. STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, Notched-rectangle logo on the cutter. Later model with the cutter-adjustment lever. 99% black japanning remains. Complete with fence, depth stop and spur. Some light patina from age on the bare metal surfaces, Fine+ ........ $95.00
    Picture

50. STANLEY NO. 78 DUPLEX RABBIT & FILLETSTER PLANE, This one is unmarked, but made by Stanley for some other company. Later model with the cutter-adjustment lever. 98% black japanning remains. Complete with fence, depth stop and spur. Very nice, Fine ........ $70.00
    Picture

    There may be more No. 78-type planes, made by Sargent and Millers Falls, listed in the Other Planes category, below

51. Boxed STANLEY NO. 79 SIDE RABBIT PLANE, Made in USA logo on the cutters. Cuts right- and left-hand rabbets. A later model with the fence. 99% of the nickel plating remaining, Fine+ ........ $120.00
    Picture

52. STANLEY NO. 79, SIDE RABBET PLANE, Notched rectangle logo on the cutters. A later Made in USA model with the fence. Almost all of the nickel plating remains, Fine ........ $100.00
    Picture

53. STANLEY NO. 90, BULL NOSE RABBET PLANE, Made in USA. Notched-rectangle logo on the cutter. These are much better and finished a lot nicer than the ones coming out of England. The top comes off so it can be used as a chisel plane, too. 99% nickel plating,Fine+ ........ Sold $125.00
    Picture

54. STANLEY NO. 92, CABINET MAKER'S RABBET PLANE, This is a type I, with the 3.13.1900 patent date on the cutter, ant the bottom front is hollow with a separate plate pinned to the sides. 3/4 inches wide and 5 1/2 inches long. The top comes off so it can be used as a chisel plane, too. 90% nickel plating remains, G+ ........ Sold $170.00
    Picture

55. STANLEY NO. 93, CABINET MAKER'S RABBET PLANE, Made in USA mark on the cutter and the plug in the front. 1 inch wide and 6 1/2 inches long. They are handy for cleaning up rabbets and tenons. These are much better and finished a lot nicer than the ones coming out of England. The top comes off so it can be used as a chisel plane, too. 98% nickel plating remains, Fine ........ $225.00
    Picture

56. Boxed STANLEY NO. 95, EDGE TRIMMER BLOCK PLANE, The sole has a fence at 90 degrees to plane the edges of boards square to the face. Notched rectangle logo on cutter, 99% japanning. This plane has seen very little use. The box is very nice, Fine+ ........ $235.00
    Picture

57. STANLEY NO. 95, EDGE TRIMMER BLOCK PLANE, Used to plane the edges of boards square to the face. Notched rectangle logo on the cutter. Almost new with 96% japanning - it is worn around the edges, Fine ........ $150.00
    Picture

58. Boxed STANLEY NO. 98, RIGHT-HANDED; and NO. 99, LEFT-HANDED, SIDE-RABBET PLANES, A pair of later models with the depth stop on the back. 98% nickel plating. The No. 98 box is pretty nice, the No. 99 box is missing a side and the back and has some tears.Planes are, Fine+ ........ $325.00
    Picture

59. STANLEY NO. 98, RIGHT-HANDEDSIDE-RABBET PLANE, An early one with the Jan. 29. (18)95 patent date stamped on the removable (for bullnose work) front shoe. 98% of the nickel plating remains on this very crisp example of an early plane, Fine ........ $135.00
    Picture

60. STANLEY NO. 113, CIRCULAR PLANE, A very nice example of a late Type II... Front knob has the 1877 patent date. 1892 date on the cutter. Nickel plated side-wheel with four holes. 95% japanning and great nickel plating. A very clean, original plane. Owner's name on the edge of the sole, Fine ........ $245.00
    Picture

61. STANLEY NO. 146, MATCH PLANE, Pat'd Jan 20 03 cast in the body, ca 1905. The smallest size, for planing a tongue and groove on boards 3/8 to 1/2 inch thick. A plane in near-new condition with 95% nickel plating with some dirt, Fine .................. $210.00
    Picture

62. STANLEY NO. 148, MATCH PLANE, Made in USA logo on the tongue cutter and cast in the body. For planing a tongue and groove on boards 3/4 to 1 inch thick. A plane in near new condition with 98% nickel plating, which is a little dull in some places. Very nice, Fine .................. $165.00
    Picture

63. Boxed STANLEY NO. 271 ROUTER, Made in USA. 99% nickel plating. 3 inches long, and handy for small work. Can be set for closed or open throat work. In the original box which is nice, with instructions, Fine .............. $120.00
    Picture

64. STANLEY NO. 271 ROUTER, Made in USA. This small router is 3 inches long, and handy for small work. Can be set for closed or open throat work. 97% of the nickel plating remains, with a bit of dirt, Fine .................. $75.00
    Picture

65. STANLEY BEDROCK NO. 603, SMOOTH PLANE, ca. 1931-32, with flat sides and the three adjusting screws behind the frog. Sweetheart trademark on the almost full-length cutter. Stanley on the cap. 80% japanning. Crisp rosewood handle has a tiny flake missing from the top, and. tall knob. Has some patina on the bare metal surfaces, G++ ............ Sold $245.00
    Picture

66. STANLEY BEDROCK NO. 604 1/2, SMOOTH PLANE, Later model with flat sides and the three adjusting screws behind the frog. V Trademark on the cutter that is full-length. APR. 2. (18)95 and APR. 19. (19)10 patent dates cast in the bed. BEDROCK on the lever cap.
    95% japanning. The dark rosewood handle and tall knob are nice but have some tool-box dings. There is a minor sliver off of the side of the tip of the handle (pictured).
    There is patina from age on the bare metal surfaces. The throat is good, there is some very minor roughness on the sole. A very crisp plane, Fine .... Sold $395.00
    Picture

67. STANLEY BEDROCK NO. 605, JACK PLANE, Later model with flat sides and the three adjusting screws behind the frog. 1895 and 1910 patent dates cast in the bed. V logo on the cutter with 1 3/4 inches of meat left. STANLEY BEDROCK on the cap. 95% japanning. Nice rosewood handle and tall knob have some minor tool-box dings. G++ ............ Sold $210.00
    Picture

68. STANLEY BEDROCK NO. 605C, JACK PLANE, Later model with flat sides and the three adjusting screws behind the frog. Made in USA trademark on the cutter with 2 inches of meat left, Stanley on the cap. 95% japanning. Nice rosewood handle and tall knob have some minor tool-box dings. G+ ............ $175.00
    Picture

1. EDWIN HAHN NO. 3 SMOOTH PLANE, (No. 4 size) Wilkes-Barre, Penn. 1908-18.
   Hahn was apparently influenced by Siegley, although there is no known connection.
   Aside from an unusual lateral adjuster, the main feature seems to be that the chip-breaker is attached to the cap. Almost all of the japanning remains. Some patina on the bare metal surfaces, G+ ........ $235.00
   Picture

2. MILLERS FALLS NO. 8, SMOOTH PLANE, (No. 3 size) 98% japanning. Has had very little use. Crisp rosewood handle and tall knob have a few of dings to the finish. Has been lightly cleaned, G++ ........ $90.00
   Picture

3. SARGENT NO. 418, FORE PLANE, (No. 6 size) Sargent VBM (Very Best Made) logo on the cap and cutter with 1 3/4 inches of meat left, date this to ca. 1920. This is a nice example of the No. 6-size jointer plane made by a respectable company. There is a chip on the side of the mahogany handle. There is a short beaded knob. 92% of the japanning remains. The cutter needs sharpening. Has been lightly cleaned. A very good user, G+ ........ Sold $40.00 $65.00
   Picture

4. UNION MFG. CO. NO. X-8, JOINTER PLANE, No. 8 size. Pat. 12.8.(19)03 cast in the bed. The X-series planes have an adjustment lever that locks between two brass nuts. Thick-tapered cutter has 1 1/2 inches of meat left. 96% japanning is a little grimy in places. Mahogany handle and low knob have some tool-box dings. There's some patina on the bare metal surfaces. A very nice example of a hard-to-find plane, G+++ ........ $295.00
   Picture

5. Boxed CRAFTSMAN (Stanley No. 78) DUPLEX RABBIT & FILLETSTER PLANE, Made by Sargent. Complete with fence, depth stop and screws. Has seen little use, has 98% of the original japanning. Some light patina on the bare metal. In the original box with clear tape over the label (Good), which protected it from damage, Fine ........ $80.00
   Picture

6. CRAFTSMAN (Stanley No. 78) DUPLEX RABBIT & FILLETSTER PLANE, Made by Millers Falls. Complete with fence, depth stop and screws. Has seen little use, has 95% of the original japanning. Some light patina on the bare metal. A good user, Fine ........ $75.00
   Picture

7. FULTON NO. 409, SMOOTH PLANE, (No. 4) Made by Sargent. Raised area behind the knob has Fulton cast in it. 97% japanning, handle has a tight crack but most all of the finish, G+ ... $55.00
   Picture

1. Boxed STANLEY NO. 9 1/4, BLOCK PLANE, Adjustable cutter. 6 inches long. Stanley notched-rectangle mark on the cutter. 99% japanning. Some minor patina on the bare metal surfaces from age. The box has some tape on it, Fine+, ........... $45.00
   Picture

2. STANLEY NO. 9 1/4, BLOCK PLANE, 6 inches long. Adjustable cutter. Stanley notched-rectangle mark on the cutter. 98% japanning - the cap has been repainted. Some patina and light rust on the bare metal surfaces, G+ A very nice plane, Fine ........... $30.00
   Picture

3. STANLEY NO. 9 1/2, BLOCK PLANE, Adjustable throat. Adjustable cutter. Notched-rectangle logo on the cutter. This is a very nice plane. Japanning is 95%. Very crisp with some minor patina on the bare metal surfaces, G++ .......... $80.00
   Picture

   No. 9 1/2 Note: The Stanley No. 16 is the same as the No. 9 1/2 except the cap is nickel plated. The No. 18 is the same except for a knuckle-joint cap, which is very nice for using. The Millers Falls No. 16 is virtually the same as the Stanley 9 1/2.

4. STANLEY NO. 15, 7 INCH BLOCK PLANE, with adjustable throat. Same as the No. 9 1/2, but an inch longer. Notched-rectangle logo on the cutter. 97% japanning, Fine ........... Sold $80.00
   Picture

5. STANLEY NO. 15, 7 INCH EXCELSIOR BLOCK PLANE, with adjustable throat, ca. 1885, It has the early Excelsior-style body with the hump towards the rear, the cap with the lever underneath, and Bailey Patent cutter. 85% japanning. Some staining and a little pitting on the sides, but, overall a good, usable example of an early block plane. Can use some cleaning, G+ ........... Sold $85.00
   Picture

6. STANLEY NO. 16 BLOCK PLANE, Exactly the same as the No. 9 1/2 except it has nickel plated trimmings. Adjustable throat. A nice early one. J trademark on the cutter, 10. 12. (18)97 patent date on the cap, and the Feb 20 (18)94 patent date on the throat-adjustment lever. Almost all of the japanning and nickel plating remains. (There is some patina on the bare metal surfaces. A very nice example of an early plane, Fine, .......... Sold $95.00
   Picture

7. STANLEY NO. 18, BLOCK PLANE, with adjustable throat. Nickeled trimmings. J trademark on the cutter dates this one to around 1900. Has 95% of the japanning, and 90% of the nickel plating remaining on the cap. Some minor dings and light pitting on the sole won't affect use, but could be lapped out. A good plane for use - a lot of woodworkers like the cap for blade-holding ability and comfort, G+ ............Sold $60.00
   Picture

8. DIAMOND EDGE NO. 18, BLOCK PLANE, with adjustable throat. Made by Stanley (No. 18 is the Stanley number). Same as the no. 9 1/2 except for the knuckle-joint cap which is preferred by many for its comfort during use. Nickeled trimmings. 90% of the japanning and great nickel plating remains. A very nice plane to use, G++ ............ Sold $55.00
   Picture

9. Boxed STANLEY NO. 60 1/2, LOW ANGLE BLOCK PLANE, with adjustable throat. A very nice example from the 1950s. Made in USA logo on the full-length cutter. This is the smaller, 6 inch block plane. I find this plane to be very useful because of its small size and low angle. No chips or cracks in the throat. It has 99+% of its japanning. In the original box, which is nice. Some minor stains on the bare-metal surfaces from storage, Fine ............ $110.00
   Picture

10. STANLEY NO. 60 1/2, LOW ANGLE BLOCK PLANE, with adjustable throat and adjustable cutter. Notched-rectangle logo on the cutter with good life left. This is the smaller, 6 inch block plane. I find this plane to be very useful because of its small size and low angle. No chips or cracks in the throat. It has 95% of its japanning. Some patina on the bare-metal surfaces. Some minor scratching on the bottom, G++ ............ Sold $60.00
    Picture

11. Boxed STANLEY NO. 65, LOW ANGLE BLOCK PLANE, with adjustable throat, knuckle-joint cap. 99% japanning, and nickel plating on the knuckle-joint cap. Some light patina on the bare metal surfaces from age. In the original box, which is pretty nice, Fine+ ....... $180.00
    Picture

12. STANLEY NO. 65, LOW ANGLE BLOCK PLANE, with adjustable throat, knuckle-joint cap. Notched-rectangle logo on the full-length cutter. 98% shiny japanning. This is probably a WW II model, with cadmium plating, and the knob is not plated. Has been lightly cleaned. A very nice plane, Fine ....... Sold $110.00
    Picture

13. CRAFTSMAN NO. 3732, (Made by STANLEY, it's their No. 65) LOW ANGLE BLOCK PLANE, with adjustable throat, knuckle-joint cap. 95% japanning, nickel plating on the cap is a bit dull. Crisp plane with no chips or cracks in the throat. Some patina on the bare metal surfaces, G++ ....... Sold $90.00
    Picture

14. MILLERS FALLS NO. 57, LOW ANGLE BLOCK PLANE, This one is the same size as the STANLEY No. 65, but it has the regular block plane cap. Most of the japanning remains, except some is missing on the hood of the cap, which is common. The bare metal surfaces have some patina. This is a very good user, G+ ............... Sold $70.00
    Picture

15. CRAFTSMAN 3732 (No. 65) LOW ANGLE BLOCK PLANE. This one is the Sargent equivalent of the STANLEY NO. 65, and sold by Craftsman. 98% grey enamel, most of the nickel plating. A good user, G+ ............ $45.00
    Picture

16. STANLEY NO. 75, BULL NOSE RABBET PLANE, Sweetheart logo on the cutter. Adjustable throat. 90% japanning. W or M owner's mark on the heel of the plane, G+ ............ $30.00
    Picture

17. STANLEY NO. 100 1/2, TAILED HANDLE BLOCK PLANE, 3 1/2 inch sole. Notched rectangle logo on the cutter. The bottom is curved in both directions. Used by model and patternmakers and musical instrument and furniture makers for cleaning out surfaces having a curved radius. Also good for hogging out areas for clearance. Has had little use. 98% japanning. Some light patina on the sole, Fine ........... $135.00
    Picture

18. STANLEY NO. 101, BLOCK PLANE, Notched-rectangle logo on the cutter. 99% of the black japanning remain. There are a couple of scuffs on the red cap, Fine ........... $35.00
    Picture

19. STANLEY NO. 102, BLOCK PLANE, Early arched J trademark on the cutter. 80% of the japanning remains, G ........... $30.00
    Picture

20. Boxed STANLEY NO. 102, BLOCK PLANE, Notched-rectangle logo on the cutter. 99% of the japanning remains, with some minor rust spots on the bare metal surfaces from storage. A very nice little plane. The box has some edge wear, Fine ........... $50.00
    Picture

21. FULTON NO. 102, BLOCK PLANE, Looks like it was made by Sargent. 95% of the japanning remains. Could use a bit of cleaning, G++ ........... $30.00
    Picture

22. MILLERS FALLS NO. 5, BLOCK PLANE, Same as the Stanley No. 102, but made by Millers Falls. 98% japanning. Shiny-nice, Fine ........... Sold $40.00
    Picture

23. STANLEY NO. 103, BLOCK PLANE, Same as the No. 102, except there is a cutter adjuster. Early type with the large arched J trademark on the cutter. 70% of the japanning remains, G+ ........... $40.00
    Picture

24. Boxed STANLEY NO. 110, BLOCK PLANE, In it's original box. Stanley notched rectangle logo on the cutter. 99% japanning and enamel. Some light patina on the bare metal surfaces. In a very nice original box , Fine ........... $30.00
    Picture

25. STANLEY NO. 118, BLOCK PLANE, A low-angle block plane. Has a steel body that doesn't break like cast iron. These were originally designed for shop class, but they are very handy for use. It has almost all of the black enamel on the body, but is missing some from the top of the cap, G++ ........... $40.00
    Picture

26. STANLEY NO. 140, RABBET BLOCK PLANE, Sweetheart logo on the cutter. Has a skewed blade, which will make fine shavings, and a removable side plate to make it into a rabbet plane. 95% japanning and 95% nickel plating on the cap, Fine .................. $185.00
    Picture

27. STANLEY NO. 203, BLOCK PLANE. Notched-rectangle logo on the full-length cutter. 98% of the japanning remains. Crisp rosewood knob. 5 1/2 inches long. This is a perfect plane for small, general purpose work, or for kids to use. There is are some spots of very light stain on the top of the cutter, but this is very nice, Fine+ ........... $120.00
    Picture

28. MILLERS FALLS NO. 206, STEEL BLOCK PLANE, same as the Stanley 118. A low-angle block plane. Made to be unbreakable, it's actually a light, comfortable plane to use. 98% of the black japanning and nickel plating remains, G++ ........ Sold $55.00
    Picture

29. STANLEY NO. 220, BLOCK PLANE, An early one with the V trademark on the cutter, ca. 1910. Rosewood knob.
    A general purpose plane that is the choice for many carpenters for trimming and smoothing.
    95% japanning remains. Some patina on the bare metal surfaces. It's in superior shape for its age, G++ ........... Sold $40.00
    Picture

1. STANLEY NO. 12, VENEER SCRAPER, Used for scraping fine hardwoods, veneer, and fancy grained woods. 96% japanning. Cocobolo handle. The cutter has the STANLEY mark and is nearly full-length. Some light patina on the bare metal surfaces. Owner's initials on the bottom of the handle and the blade, G++ .............. Sold $125.00
   Picture

2. STANLEY NO. 12 1/2, VENEER SCRAPER, Used for scraping fine hardwoods, veneer, and fancy grained woods. Sweetheart logo on the cutter. Full rosewood sole has almost all of its original thickness. There are some scratches and a small chip on the sole, but that won't affect use. 95% japanning. Nice handle, Fine .............. $185.00
   Picture

3. STANLEY NO. 80, CABINET SCRAPER, Notched-rectangle logo on the cutter and crossbar. 85% of the japanning remains, G+ ........ $40.00
   Picture

4. STANLEY NO. 80M, CABINET SCRAPER, The M stands for malleable iron, which makes this one much less breakable than the cast iron model. Made in USA logo on the crossbar and the cutter. Almost all of the blue enamel remains. This one is probably from the 1960's, Fine ........ $55.00
   Picture

5. STANLEY NO. 81, CABINET SCRAPER, Has most of the nickel plating, with some dirt and light rust. Good depth on the rosewood sole. The cutter has a Sweetheart mark, but looks like it was cut down from a No. 12 scraper. A good user, G+ ........ $90.00
   Picture

   STANLEY NO. 82, CABINET SCRAPER, This one has the flat cutter with the Sweetheart logo. 96% of the japanning remains, Fine ........ Sold $50.00
   Picture

6. STANLEY NO. 112, CABINET SCRAPER PLANE, STANLEY block-letter logo on the cutter with almost full length. 96% japanning. Has a perfect rosewood handle and front knob with a few minor tool-box dings. The plane is very crisp, Fine .............. $325.00
   Picture

7. STANLEY NO. 112, CABINET SCRAPER PLANE, A good user. STANLEY block-letter logo on the cutter with some light pitting. The rosewood handle and front knob have tool-box dings. 75% japanning, but looks a lot better. Some minor pitting on the sole won't affect use, and could be lapped out. I will include a replacement cutter for use. Could use a bit of cleaning, G+ .........Sold $200.00
   Picture

8. STANLEY NO. 292, HOOKED SCRAPER, Almost all of the original finishes remain, Fine ........ Sold $35.00
   Picture

9. STARRETT SCRAPER HANDLE, Holds hand-scraper blades for cabinet scraping, floor scraping, etc. Universal-joint blade adjustment, G++ ............. $30.00
   Picture

(Note: For information about combination planes, see My Features Section)

(Another Note: Sharpen the cutters on the flat side and maybe hone the bevel. that way the profile doesn't get deformed.

1. Boxed STANLEY NO. 45 COMBINATION PLANE, In the orange steel box with hinged lid. This is the only one that can be displayed as assembled in the box. Has seen little use. Sweetheart logo on the skate. 7 Planes in one ... 1-Beading and Center Beading, 2-Plow, 3-Dado, 4-Rabbet, 5-Match Plane, 6-Sash Plane, 7-Slitting Plane. This one is complete with the long and short rods, 4 depth stops, cam, spare spurs, screwdriver, and 23 cutters. The cutters are shiny-nice with just a bit of stain from storage. 98% of the nickel plating remains - there is some stain on the long rods. In the original box that is very crisp with only one area of rust on the side of the front top, with original instructions, Fine ......... $535.00
   Picture-Plane

   Picture - Box

   Picture - cutters

   Picture - In box

2. In The Box STANLEY NO. 45 COMBINATION PLANE. A very crisp plane. Sweetheart logo on the skate and cutter box. This one is complete with the long and short rods, all 4 depth stops, cam, extra spurs, and a double box with 23 cutters. The cutters appear to be unused, and still have the cosmoline on them.
   98% of the original nickel-plating remains. Very crisp rosewood handle fence, and knob.
   In the original box which is sound but has some minor water-damage, with the original instructions, Fine ......... $475.00

   Picture - plane

   Picture - cutters

   Picture - Boxes

3. Boxed STANLEY NO. 45 COMBINATION PLANE Notched rectangle logo on the skate. 7 Planes in one ... 1-Beading and Center Beading, 2-Plow, 3-Dado, 4-Rabbet, 5-Match Plane, 6-Sash Plane, 7-Slitting Plane. This one is complete with the long and short rods, 4 depth stops, cam, and a Sweetheart cutter box with 23 cutters. They have been lightly used, but they have some minor stain or rust that will disappear when they are lapped while sharpening. 95% of the original nickel-plating remains. In the original box, which is rough. Includes the original instructions, G++ ......... $295.00
   Picture-Plane

   Picture - Boxes

   Picture - cutters

4. STANLEY NO. 45 COMBINATION PLANE, Notched-rectangle logo on the skate. Complete with long and short rods, all four depth stops, cam and all 23 cuttersin the original Sweetheart box. The cutters are very crisp. Most of the brown is the original cosmoline protection. 99% nickel plating. I'll include a copy of The Stanley Company's Combination Planes book, that has the instructions for the No. 45. This one is very crisp, Fine+ ......... Sold $235.00
   Picture-Plane

   Picture - Cutters

5. STANLEY NO. 5 NOSING ATTACHMENT - For use on the No. 45 plane. Cuts a 1 1/4 half-round for use on 5-quarter stock, for stair treads, etc. 99% nickel plating, Fine+ ......... Sold $150.00
   Picture

   STANLEY NO. 8 HOLLOW & ROUND PAIR- For use on the No. 45 plane. 99% nickel plating, Fine++ ......... Sold $150.00
   Picture

6. STANLEY NO. 45 COMBINATION PLANE - CUTTER SET ONLY, Here's a set of No. 45 cutters in the wooden double-box bottom. The set is complete except for the slitter, which came on the plane because there isn't room in the box. All are usable, they have some minor stain or rust that will disappear when they are lapped while sharpening, G+ ......... $95.00
   Picture

7. STANLEY NO. 46, SKEWED COMBINATION PLANE, It's a later nickel plated one with the rosewood fence A great combination plane. Complete with spurs, both depth stops, and a complete set of 10 cutters, and the slitter. The skewed cutters work great, especially for dados. 80% of the nickel plating remains, but it's a bit dusty and dirty. The cutters need a bit of lapping and sharpening, and they will be ready to go. A very nice user, G+ ......... Sold $375.00
   Picture

8. Boxed STANLEY NO. 50 LIGHT COMBINATION PLANE, Complete with 2 depth stops, the usually-missing cutter holding screw and shaving deflector, and 17 cutters (9 plow, 6 beading and 1 match) that have had very little use (only two have been sharpened) - they have some dirt and original cosmoline on them, in their blue-labeled Stanley box. The plane has about 99% of its nickel plating. The rosewood handle has some light scuffs to the finish. In the original box, which it a little rough, Fine++ ........ $265.00
   Picture

9. STANLEY NO. 55 COMBINATION PLANE. Sweetheart logo on the skate. With this plane you can make an almost unlimited variety of moldings. Complete with long and short rods, 3 depth stops, auxiliary center bottom, cam, screwdriver, and a total of 55 cutters.
   The cutters are in nice, crisp condition. There are a few spots of rust from storage for over 70 years. Honing them on the flat side while sharpening will clean that up.
   The plane was used very little... 98% of the nickel plating remains, with minor dirt.
   Nice dark rosewood handles and fences.
   The hinged wooden box is rare. There are built-in slots on the side to hold the cutters. The labels have some wear, and someone added brass corners to the bottom. I will include a copy of The Stanley Combination Plane, which has complete instructions for the No. 55 , Fine .......... $675.00

   Picture - Plane

   Picture - Cutters

   Picture - Box

10. STANLEY NO. 55 COMBINATION PLANE, CENTER AUXILIARY BOTTOM ONLY, Here's a chance to pick up this often-missing but necessary part. It supports the plane body when using the wider molding cutters. Complete with the shoe. 97% of the nickel plating remains, Fine .......... $100.00

    Picture

Back To Tool Index Back to Homepage