This is a list of wrenches & hammers for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

Back To Tool Index Back to Homepage

Hammers
Click To Order

1. AMPCO H20 BERYLLIUM CLAW HAMMER. Beryllium tools were used to prevent sparking when in an environment with gas. Very crisp condition, Fine ......... $55.00
   Picture

2. RICHARDSON TACK HAMMER. Patented Dec 9, 1891. Another interesting tack hammer. The claw sticks up on the back side. Some pitting. The handle looks like a replacement, G+ ......... $65.00
   Picture

3. CRESCENT TOOL CO. HAMMER/SCREWDRIVER, five inch sive. Handle swivels to be a hammer or tee-handle screwdriver, G+ ......... $35.00
   Picture

4. CHENEY CLAW HAMMER, 16? oz. Bell-face. Has the ball-bearing, nail-holding feature at the top of the claw, G+ ......... Sold $45.00
   Picture

5. PLUMB SIGNATURE CLAW HAMMER, 16 oz. Original handle is signed by the guy who made it, G++ ......... Sold $35.00
   Picture

6. GENUINE PLUMB CLAW HAMMER, 16 oz. Bell face. Original handle, G+ ......... $30.00
   Picture

7. BRIAR EDGE SERVICE TOOL CLAW HAMMER, 7 oz. Original handle is marked, along with the head, G++ ......... $45.00
   Picture

8. STANLEY NO. 101 1/2A CLAW HAMMER, 16 oz. With straight or ripping claw. Octagon handle and face, G+ ......... Sold $30.00
   Picture

9. MILLERS FALLS 716 CLAW HAMMER, 16 oz, Octagon face and handle, G++ ......... $30.00
   Picture

10. MILLERS FALLS 1418 CLAW HAMMER, 7 oz. Original handle has a hang hole. Head is crisp but a little dirty, G+ ......... $35.00
    Picture

11. D. MAYDOLE CLAW HAMMER, 12 oz.?, Early features. Original handle. There are some minor dings on the outside edge of the face, G++ ......... Sold $35.00
    Picture

12. VAUGHN NO. 5 TACK HAMMER, Magnetic face. Has a claw on the other end, Fine ......... $30.00
    Picture

13. STANLEY NO. 12 CLAW HAMMER, 7 oz. Sweetheart logo stamped on the head. Original handle, G+ ......... $70.00
    Picture

14. STANLEY No. 601, MAGNETIC TACK HAMMER, 5 OZ. With claw. The number is stamped in the end of the handle. Still has the decal. Close to unused, ......... $30.00
    Picture

15. HELLER BROTHERS, UPHOLSTERER'S MAGNETIC HAMMER, 7 oz. Same as the Stanley No. 602. Small face is magnetic. Partial decal on the handle, Fine ......... $30.00
    Picture

16. G. H. MOUNT, UPHOLSTERER'S MAGNETIC HAMMER, Bronze head. 7 oz. Same as the Stanley No. 602. Small face is magnetic, Fine ......... $20.00
    Picture

17. FAIRMOUNT, UPHOLSTERER'S MAGNETIC HAMMER, Same as the Stanley No. 602. Small face is magnetic. Has a claw in the bottom of the handle, Fine ......... $25.00
    Picture

18. THOMAS MFG. CO., COMBINATION FENCING HAMMER, Twelve inch length. Has hammer, hatchet, pliers, alligator wrench and screwdriver.
    The nickel plating is dull, but mostly remaining, G++ ........ $75.00
    Picture
19. STANLEY TINSMITH'S HAMMER, About 8 ounces. Decal on handle, Fine ......... $40.00
    Picture

20. CHENEY NO. 777 ADZE/HAMMER, The early one with the two inch adze. Has a teardrop-shaped claw in the adze side to pull nails. The handle looks like a replacement, G+ ......... $50.00
    Picture

Wrenches
Click To Order

1. BUCKEYE IMPLEMENT WRENCH, No. A3, 9 inch length with two sockets, G+ ........... $35.00
   Picture

2. BAILOR PLOW CO., IMPLEMENT WRENCH, No. C49, Atchison, Kan. 9 3/4 inch length overall, G+ ........... $35.00
   Picture

3. LEVER WRENCH CO., Duluth, Minn. 8 inch quick-adjust wrench with lever adjustment, G++ .......... Sold $45.00
   Picture

4. BILLINGS & SPENCER, 5 1/2 inch Bicycle wrench. Unique side-mounted worm gear. Made exclusively for POPE MFG. CO. and Patd Jan 15th, 1895 stamped on it. Some minor dings to the jaws, G+ ........... $75.00
   Picture

5. COCHRAN SPEEDNUT WRENCH. Cam-action quick-adjust. 9 inches overall, G++ ......... $35.00
   Picture

6. DIAMALLOY, HANDIMAN DH16 PLIER/WRENCH COMBINATION. 6 1/2 inch length. 99% nickel plating with some light scratches, Fine .............. Sold $45.00
   Picture

7. BILLINGS & SPENCER RATCHET SOCKET WRENCH SET, NO. 52. 13 sockets, 3/8 to 1 1/4 inch. These fit "all S.A.E. and A.L.A.M. bolts and nuts, from 1/4 to 7/8 in." Also includes the ratchet, speed driver, two extensions and a screwdriver bit. In the original wooden box, G+++ .......... Sold $85.00
   Picture

8. LARCOLOY 6 inch UNIVERSAL WRENCH. Cam-action with a spring. Good nickel plating, G++ ........ Sold $60.00
   Picture

9. SHARK WRENCH, Richards Mfg. Co., Aurora, Ill., 12 inch. A very high quality quick-adjust alligator wrench. Case hardened finish with some minor rust, G++ ...................... Sold $195.00
   Picture

10. BILLINGS & SPENCER PLIERS. 13 1/2 inches long. Patented Mar 12, (19)07, G+ .......... $35.00
    Picture

11. W. SCHOLLHORN BELTING PLIERS, Bernard's patent parallel-jaw pliers cuts round machinery belting, punches holes and crimps the staple. 98% nickel plating, Fine .......... $35.00
    Picture

12. SARGENT & CO., Bernard's patent parallel-jaw pliers with top nippers. 4 1/2 inches long. Almost all of the nickel plating remains, Fine .......... Sold $25.00
    Picture

13. SARGENT & CO. NIPPERS, Bernard's patent cutters are 6 inches long, Fine .......... Sold $30.00
    Picture

14. W. SCHOLLHORN NIPPERS, Bernard's patent nippers. Pat. Oct. 24, 1899. 90% nickel plating remains, G+ .......... $25.00
    Picture

15. POPE MFG. CO. PREMEIR NO. 7 BICYCLE WRENCH. 4 inch. 98% nickel plating with some tool-box scratches, Fine .......... $65.00
    Picture

16. BULLARD NO. 0 WRENCH, 5 1/2 inch length. Pat'd Oct 27, (19)03. Almost all of the nickel plating remains, G+++ .......... $85.00
    Picture

17. THE ELGIN ALLIGATOR WRENCH. Pat'd June 9, )18)97, and Jan 9, (19)06 for the thread die holder. 92% nickel plating and all six dies, G+++ ............ $115.00
    Picture

18. STANLEY NO. 9 1/2 DIAGONAL CUTTERS Notched rectangle logo. 6 1/2 inches long, G+ .......... $50.00
    Picture

19. GLOBE WRENCH CO., SUNNAPEE, N.H., Pat March 15, (19)10. Looks like Schultz No. 393, but apparently the company started out in New Hampshire. The two guide screws in the lower jaw are missing, and there is a chip at the top of the handle. But, this is one I haven't seen before, G .......... Sold $55.00
    Picture

20. N.Y.N.H.&H RR OPEN END WRENCH, New York, New Haven and Hartford Railroad. 9 inches long, G+ .......... $20.00
    Picture

21. CRESCENT TOOL CO., 4-6 inch double-end adjustable wrench. 6 1/4 inches overall. Crisp with some patina, G++ .......... Sold $45.00
    Picture

22. BET'R GRIP, 4 inch crescent-type wrench, J. P. Danielson Co, Fine .......... Sold $25.00
    Picture

23. DIAMALLOY, 4 inch crescent-type wrench. An earlier one with stamped name and a 5/16 wrench in the hole in the end, G++ .............. $35.00
    Picture

24. DIAMALLOY, 4 inch crescent-type wrench. Diamond Tool & Horseshoe Co., Fine .............. $20.00
    Picture

25. WIZARD, H 2400, 4 inch crescent-type wrench, Fine ............ $25.00
    Picture

26. UTICA, 4 1/2 inch crescent-type wrench. Extra-large jaws, Fine ......... Sold $40.00
    Picture

27. BILLINGS & SPENCER, S-SHAPED WRENCH, 6 inch crescent-type adjustable wrench, G+ ................ $35.00
    Picture

28. HAMMOND MFG. CO., BOSTON, MASS, PIPE AND NUT WRENCH, Patented April 3, 1900. The patent date is cast in the handle. A small, unusual quick-adjust wrench. 7 inches overall length.G++ .......... $195.00
    Picture

29. H & H CO., BALTO, MD. A 6 inch quick-adjust monkey wrench. The back collar has a wedge that tightens the lower jaw at different toothed settings. The roughness in the picture appears to be from casting. Not pitting, G+ .............. $85.00
    Picture

30. VACUUM GRIP PLIERS, 4 1/2 inches, Early snap on. Cute, G++ .......... $20.00
    Picture

31. EIFEL-GEARED PLIERENCH KIT, 8 1/2 inch length. Has the universal, wire jaws, and any-angle screwdriver. in the original oil-skin pouch with instructions. This is an amazing wrench for use, Fine .......... Sold $75.00
    Picture

32. PLATTINA CAM-ACTION WRENCH, Made in Germany. 8 inch. THese are handy to use, G+ .......... $25.00
    Picture

33. Wm. HJORTH & CO., EMPIRE PIPE WRENCH, 10 inch, Pat Dec 29, 1896. The rivet that holds the quick-adjust feature is missing and has been replaced with a nail. An easy fix. G+ .......... $60.00
    Picture

34. EATON, COLE & BURNHAM, Pipe wrench. Franklin patent, July 20, 1886. Not in Schultz. Small chip in the back of the inset lower jaw. G+ .......... $65.00
    Picture

35. SHEFFY MFG. CO., CHICAGO, Self-adjusting pipe wrench. Pat'd Jan 24, 1896, G+ .......... $115.00
    Picture

36. UNIVERSAL WRENCH CO., Bartow, Florida. Buggy Wrench, Pat 1921, G+ .......... $60.00
    Picture

37. WRIGHT WRENCH, TACOMA, WASHINGTON, Pat 3-04, 10 inch quick-adjust nut wrench, G+ ............ $75.00
    Picture

38. WRIGHT WRENCH, TACOMA, WASH, quick-adjust nut wrench, Same as above, except this one is 15 inches, and has a steel sleeve for a handle, G+ ............ $75.00
    Picture

39. THE WAKEFIELD WRENCH, plier-type ,quick-adjust nut wrench from Worcester, Mass, 15"long, G ............ Sold $25.00
    Picture

40. BECKLIN WRENCH CO., Seattle, Wash., Pat'd Mar 10, 1920, 14 inch. Rotate the toothed lever on the back for quick adjustment, G+ ........... Sold $105.00
    Picture

41. BEMIS & CALL CO. NO. 2, Looks like it can be used on nuts or pipe. Has a toothed spur on the lower jaw. 13 inches long. Not in Schultz, G+ ............ $65.00
    Picture

42. TROJAN WRENCH, L. A. CAL., US PAT. NO. 1968783. A quick-adjust pipe wrench, I believe, because the increments on the jaws are graduated from 1/8 to 1 1/4 inches. G+ .............. $75.00
    Picture

43. RHINO WRENCH CO., Denver, Pat. No. 143898, self-adjusting pipe wrench, G+ ........... $65.00
    Picture

44. RHINO WRENCH CO., Denver, Pat. No. 143898, Here's a different Rhino design that I haven't seen before. SUPPL is scratched on the back side, G+ ........... $65.00
    Picture

45. REED MFG. CO., Pat Aug 10, 87, has an unusual and graphic casting. 10 1/2 inches long, G+ ........... Sold $45.00
    Picture

46. UNMARKED, (Marked SUL.) 9 1/2 inch nut wrench with sliding wedge adjustment, like the Standard. G+ ........... Sold $35.00
    Picture

47. UNMARKED, 9 1/2 inch wrench with sliding wedge adjustment, like the Standard. Same as above except with a toothed top jaw for pipe, G+ ........... Sold $35.00
    Picture

48. WINNER TOOL CO., Puyallup, Wash., Pat'd Mar 7, 1922, 6 inch plier-wrench, The smallest size. Looks like it has a hang-hole, G+ ............ $65.00
    Picture

49. WINNER TOOL CO., Puyallup, Wash., Pat'd Mar 7, 1922, 8 inch plier-wrench, G+ ................... $65.00
    Picture

50. L. P. WRENCH, This was apparently the predecessor to the Winner, above. Has May 2, 1915, July 2, 1918, and March 7, 1922 patent dates, G+ ............ $55.00
    Picture

51. UNIVERSAL, Patented 6-3-19. 1-22-19, 6 inch Crescent-type wrench with plier-action, G ............ $45.00
    Picture

52. BENTON, Pat. Pending, twist the handle to adjust the jaws, twist again to lock, G+ ......... $95.00
    Picture

53. BOOS TOOL CORP, K. C. MO. unusual 6 inch screw-adjust wrench, G++ ......... $25.00
    Picture

54. STEVENS, NY, PERFECT, 3 3/4 inch spoke wrench, left picture, G+ ......... $30.00
    Picture

55. DUDLEY TOOL CO. 3 inch spoke wrench. Pat May 29, (18)94, right picture,G+ ......... $25.00
    Picture

56. REINHARD McCABE CO., Minneapolis, Minn, 10 inch quick-adjust, plier-type wrench, G+ ......... $85.00
    Picture

Back To Tool Index Back to Homepage